Tekin HotWire Lite Beta

Team Tekin

ଏହି ଆପ୍ ବିଷୟରେ

Here it is: The Android App for Smartphones and Tablets, now with Data Logging!

Now you can use your Gen1/Gen2/Gen3 HotWire to connect your Tekin Speed Control to your Android Smartphone or Tablet and make adjustments, anywhere, at any time. The HotWire App gives you the edge with mobility and unparalleled accessibility; plug in, tune, and drive.

The HotWire App lets you make your adjustments on the fly, no programming card, no running back to the pits. Simply plug into the Ez port® with the HotWire, make adjustments, apply the settings, done. It’s that simple!

Wondering how you can squeeze some extra performance out of your setup? The new version of the HotWire App lets you view run time Data Logs from any Gen2 or Gen3 Tekin Speed Control, so you can now get immediate feedback on any setup changes that you make.

And it’s still FREE!!


Requirements:
-Android OS 3.1 to 9.0
-Tekin HotWire 2.0 (TT1450) or Tekin HotWire 3.0 (TT1452)
-Tekin Gen1/Gen2/Gen3 Speed Control* **
-USB OTG Cable (varies with device) or Bluetooth Low Energy (BLE) enabled device***
-Data logging available only on Gen2/Gen3 Speed Controls
-HotWire App runs in Demo Mode without HotWire device

*HotWire 2.0 and HotWire 3.0 works over USB with RX8 Gen1/Gen2/Gen3, RS Gen1/Gen2, RS Spec Gen2/Gen3, RS Pro Black Edition, RSX, RSX Pro, RX4, FX/FXR, B1/B1R.

**HotWire 3.0 works over BLE with RX8 Gen2/Gen3, RS Gen2/Gen3, RS Spec Gen2/Gen3, RS Pro Black Edition, RSX, RSX Pro, RX4 and requires that the ESC have Firmware version 255 or greater installed.

***At install, the HotWire App will inspect your device and determine if it has the required hardware to run the USB or BLE enable version of the app. Keep in mind that some Android devices possess the required hardware, but the device manufacturer has elected to disable the feature in the Operating System. If the HotWire App fails to function on your device, call our support line so that we can try to assist you. We truly want the HotWire App to work flawlessly, everywhere, and we are committed to doing so wherever possible!

ନୂଆ କଣ ଅଛି

Tekin HotWire V23.1800048.0 Build a20211126ck.
Allows Adjustments for Gen 3 Speed Controls with firmware v291 and v293.
--Improved Launch Power Control
--Improved Launch Boost Control
--Refined Power Delay Adjustment
--Adds Spec Motor Optimizations
--Adds Voltage Cutoffs for 4s,5s,6s Packs for RX4