Level Measure Pro

Contains ads
Content rating
Everyone
0+
Downloads
Content rating
Everyone
Learn more
Screenshot image
Screenshot image
Screenshot image
Screenshot image
Screenshot image

About this app

Level Measure Pro turns your phone into a bubble level and tilt meter. It shows the angle, and in Edge mode it also tells you what to fix, for example "Raise left side 4 mm".

EDGE MODE
Stand the phone on its edge on a shelf, picture frame or worktop.
• Angle dial with a moving needle, plus a bubble vial
• Correction hint in millimetres, based on a frame width you set
• The display turns so the text stays upright on whichever edge is down

FLAT MODE
Lay the phone screen up on a table, floor or appliance.
• Bubble target with X and Y bars
• Shows which side is high
• Total tilt plus separate X and Y readings

Auto switches between Edge and Flat as you move the phone. Tap a mode to keep it, or tap Auto to switch back.

UNITS AND TECHNICAL DATA
Switch the main reading between degrees, percent, millimetres per metre and ratio (1:X). The technical data panel shows angle, slope, ratio, rise, the rise over your frame width, and the calibration offset in use.

HOLD AND SAVE
• Hold freezes a smoothed reading so you can read it after lifting the phone
• A held reading shows slope, rise, ratio and the correction needed over your frame width
• Save readings with a name and review them later
• Swipe to delete a saved reading
• Saved readings stay on your device

CALIBRATION
A phone's sensor and case are rarely perfectly true, so calibrate before careful work.
• Two-point calibration: capture a reading, turn the phone 180° on the same spot, capture again
• Separate calibration for Flat mode and for each edge
• "Set zero here" makes readings relative to any surface you choose
• Reset to factory values at any time

FEEDBACK AND SETTINGS
• Haptic feedback when the reading reaches level (on devices with haptics)
• Optional light tick for each degree above 1°
• Screen reader announcement when the reading reaches level
• Level tolerance: 0.1°, 0.25°, 0.5° or 1.0°
• Smoothing: Fast, Normal or Steady
• Default units and frame width
• Keep the screen awake while measuring
• English and Urdu

GOOD TO KNOW
Phone levels are for guidance. For structural work, check with a dedicated measuring instrument. A phone is only about 15 cm long, so for floors and other long surfaces, place it on a 1–2 m straight edge.

No account is needed. The app shows ads served by Google AdMob. Depending on your region, you can review your ad privacy choices in Settings.
Bubble level and tilt meter with mm hints, calibration and saved readings.
Updated on
Nov 3, 2026

Data safety

Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
  • No data shared with third parties
    Learn more about how developers declare sharing
  • No data collected
    Learn more about how developers declare collection

What’s new

First release of Level Measure Pro.
Content rating
Everyone
Learn more

App support

Phone number
+923349726019
About the developer
Rizwan Hameed Butt
contact@veloxintelligence.dev
HNO.27, ST NO.1, SUFI ST KHOKHAR RD BADAMI BAGH Lahore, 54000 Pakistan

More by Velox Intelligence