Your wall width never divides evenly. Wainscot Layout finds the count of battens or boards so every gap comes out the same, then gives you marks to pull with a tape measure.
• Ten styles: board & batten, shaker, picture frame, slat / fluted, shiplap, tongue & groove, grid, square grid, half-wall batten and beadboard
• Enter wall width and height (or panel height), batten or molding width, a target gap or count, and rail heights
• See the best count plus one more and one fewer, each with its exact gap
• Cumulative marks from the wall edge, ready for one pull of the tape
• Shiplap and tongue & groove: row count, first row height and the ripped width of the last row
• Scaled 2D drawing with gap dimensions; tap a piece to highlight its mark
• Cut list totals every piece by width and length
• mm, cm or inches in 1/16" fractions, with the rounding error shown
• Projects are saved on your phone and can be backed up as JSON. No account, no ads, no sign-in
Results are for planning. Check the marks against your wall, and your own molding and board sizes, before you cut.
Free: all ten styles, drawing, marks, the cut list and 2 saved projects. Wainscot Layout Pro (monthly or yearly): PDF sheet, stock optimizer with boards to buy and a cutting plan, unlimited projects and several walls per project.
Support: cleverlywittyapps@gmail.com
[Minimum supported app version: 1.0.0]
Even batten and shiplap gaps for any wall, with marks, drawing and cut list.