Planobras · site measurement
Everyone
info
0+
Downloads
About this app
Planobras is a tool for professionals: surveyors, kitchen fitters and renovation contractors. It is the one we use to measure kitchens every day, and you can try it for 7 full days, without signing up and without giving a single piece of data.
WHAT IT DOES
· You draw the floor plan with your finger or by entering the measurements, and the app closes the shape and warns you if something does not add up.
· Each wall has its own elevation, with the usual heights already filled in: underside of worktop, top of worktop, underside of wall unit and tall unit.
· You place what is on each wall - windows, doors, sockets, cold and hot water, waste outlets, extractor ducts, pillars, beams - and it is dimensioned where it is.
· You get the plan on a landscape A4 sheet, at a standard scale, with all the elevations at the same scale.
· You export to DXF and other formats to take the measurements into your design software.
· Photos attached to the wall, for the record.
· Real undo, step by step, even with no signal.
WITH YOUR LASER MEASURE
Connects via Bluetooth to the Bosch GLM 50-27 C and its family (GLM 100-25 C, 120 C, 150 C, 165-27 C, 400 C and the AdvancedDistance 50c). You fire and the measurement drops into its box on its own, without writing anything down by hand.
Inside the app you have the full list of laser measures: the ones that definitely work, the older Bosch models that do NOT work even though they look like they should, and the ones from other brands that connect but are not understood yet.
If you do not have a laser, you measure just as well with a tape measure.
NO SIGNAL
The whole app is saved on your phone the first time. After that it works in a basement, on a site with no signal or with your phone in flight mode. Your kitchens, your plans and your photos stay on your device: they are not sent anywhere.
THE TRIAL
7 full days, with everything unlocked. Nothing is held back. No sign-up, no email address, no card. When it ends, you can still see and still export what you have measured. To keep measuring you need a professional licence: you enter your code in the same app and carry on where you left off.
Made by Muebles Domínguez García 2.0 S.L., in Bonares (Huelva, Spain), from measuring real kitchens.
WHAT IT DOES
· You draw the floor plan with your finger or by entering the measurements, and the app closes the shape and warns you if something does not add up.
· Each wall has its own elevation, with the usual heights already filled in: underside of worktop, top of worktop, underside of wall unit and tall unit.
· You place what is on each wall - windows, doors, sockets, cold and hot water, waste outlets, extractor ducts, pillars, beams - and it is dimensioned where it is.
· You get the plan on a landscape A4 sheet, at a standard scale, with all the elevations at the same scale.
· You export to DXF and other formats to take the measurements into your design software.
· Photos attached to the wall, for the record.
· Real undo, step by step, even with no signal.
WITH YOUR LASER MEASURE
Connects via Bluetooth to the Bosch GLM 50-27 C and its family (GLM 100-25 C, 120 C, 150 C, 165-27 C, 400 C and the AdvancedDistance 50c). You fire and the measurement drops into its box on its own, without writing anything down by hand.
Inside the app you have the full list of laser measures: the ones that definitely work, the older Bosch models that do NOT work even though they look like they should, and the ones from other brands that connect but are not understood yet.
If you do not have a laser, you measure just as well with a tape measure.
NO SIGNAL
The whole app is saved on your phone the first time. After that it works in a basement, on a site with no signal or with your phone in flight mode. Your kitchens, your plans and your photos stay on your device: they are not sent anywhere.
THE TRIAL
7 full days, with everything unlocked. Nothing is held back. No sign-up, no email address, no card. When it ends, you can still see and still export what you have measured. To keep measuring you need a professional licence: you enter your code in the same app and carry on where you left off.
Made by Muebles Domínguez García 2.0 S.L., in Bonares (Huelva, Spain), from measuring real kitchens.
For professionals: measure kitchens and sites by laser, get the plans instantly.
Updated on
Featured stories
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
- No data shared with third partiesLearn more about how developers declare sharing
- This app may collect these data typesPersonal info, Messages and 4 others
- Data is encrypted in transit
- You can request that data be deleted
What’s new
The app in English, German and French. Measurements in inches or millimetres. The "Send" button shares the report via WhatsApp or email.
App support
phone
Phone number
+34623229653
About the developer
MUEBLES DOMINGUEZ GARCIA 2.0 SL.
info@masmoebel.es
PLAZA CRUCES DE MAYO 3
21830 BONARES
Spain
+34 623 22 96 53