При расчете конструкций на прочность, устойчивость или прогиб, мы так или иначе сталкиваемся с нахождением осевого момента инерции Ix/Iy, момента сопротивления Wx/Wy, радиусов инерции ix/iy, но не всегда можно найти данные значения в сортаментах, особенно, если сечение нестандартное либо сложное. Именно для этих целей был создан данный расчет по определению геометрических характеристик сечения и основной задачей является простое нахождение всех вышеперечисленных значений.
Порядок работы:
1. Выбрать необходимое Вам сечение (на выбор 8 простых фигур – круг, круглая труба, двутавр, швеллер, уголок, прямоугольник, профильная труба и тавр; также имеются сложные сечения из уголков и швеллера)
2. Задать необходимые размеры сечения
3. Нажать кнопку «Расчет»
Все полученные значения будут сведены в таблицу ниже. Среди них будут:
- площадь сечения A
- момент сопротивления относительно оси х - Wx
- момент сопротивления относительно оси у - Wy
- момент инерции относительно оси х - Ix
- момент инерции относительно оси у - Iy
- радиус инерции по оси х - ix
- радиус инерции по оси у - iy
- момент сопротивления, момент инерции, радиус инерции относительно оси uv (для уголка) – Wuv, Iuv, iuv
Для справки:
- все сечения при расчете не имеют закруглений на полках и стенках, поэтому результаты будут незначительно отличаться от значений по сортаментам
- для сечений из уголка (спаренный крестовидный и одиночный) будут рассчитаны минимальные моменты для главных осей uv
От автора:
Если данный расчет геометрических характеристик сечения был Вам полезен, то не забывайте делиться им с друзьями и коллегами.
When calculating the structures for strength, stability, or deflection, we somehow encounter the axial moment of inertia Ix / Iy, the moment of resistance Wx / Wy, the radii of inertia ix / iy, but it is not always possible to find these values in the grades, especially if the cross section non-standard or complex. It is for these purposes that this calculation was created to determine the geometric characteristics of the cross-section and the main task is to simply find all of the above values.
Operating procedure:
1. Select the desired cross-section (8 simple shapes - circle, round pipe, I-beam, channel, corner, rectangle, profile pipe and Taurus, also there are complex cross-sections from corners and channel bars)
2. Set the required cross-section dimensions
3. Press the button "Calculation"
All the values obtained will be summarized in the table below. Among them will be:
- cross-sectional area A
- the moment of resistance with respect to the x-axis - Wx
- moment of resistance with respect to the y axis - Wy
- moment of inertia about the x-axis - Ix
- moment of inertia about the y axis - Iy
- radius of inertia along the x axis - ix
- radius of inertia along the y axis - iy
- moment of resistance, moment of inertia, radius of inertia relative to the uv axis (for the angle) - Wuv, Iuv, iuv
For reference:
- all sections in the calculation do not have roundings on the shelves and walls, so the results will slightly differ from the values for the assortments
- for the sections from the corner (paired cross and single), the minimal moments for the main axes uv
From the author:
If this calculation of the geometric characteristics of the section was useful to you, then do not forget to share it with friends and colleagues.