Baldrick Buddy finds the Baldrick lighting controllers on your network and lets you run and set them up from one place, without hunting for IP addresses or opening each board's web page.

FIND YOUR BOARDS
• Every board on the network in one list, with name, type, firmware, address and whether it is receiving data
• Search, filter and sort when you have a lot of boards
• Tap a board's address to open its web interface in Safari

RUN THEM
• Start a test pattern to check your wiring, with brightness and colour
• Start and stop Cunning FX presets, and choose the one that runs at power-up
• Busk Board: big buttons for running looks live, with a Blackout button
• See what is sending a board data, and how fast

SET THEM UP
• Outputs and pixel models: names, pixel counts, colour order, brightness and gamma • Relays and dimmers
• DMX presets, and the preset sent at power-up
• Physical buttons: what a press and a long press do
• Board name and network: fixed IP address and WiFi
• Create and edit CunningFX presets and Busk Board buttons

Nothing is changed on a board until you tap Save.

KEEP THEM UP TO DATE
• Update one board, or every board that needs it, and watch them come back
• Switch boards between the main, beta and commercial release channels, one at a time or all together
• Offline update: download firmware while you have internet, then update boards on a network that has none

PRIVATE BY DESIGN Buddy talks only to the boards on your own network. There is no account and no cloud, and your board list and settings never leave your device. The only internet use is downloading firmware when you ask for it.

You need Baldrick hardware on the same WiFi or Ethernet network. If nothing is found, check you are on the right network and allow Local Network access when asked.