LeaseSight is remote tank & well monitoring for oil & gas operators. LTE sensors report tank level, pressure, and flow every hour, and an alert lands in your pocket the moment something crosses a line.

No sensors yet? Put it to work today as a manual gauging app: add your wells and tanks, hand-gauge in feet, inches, and quarters, and keep run and draw tickets and pressure logs in one place.

Record a gauge in seconds
Open the tank, tap Record gauge, and dial it in the way you already gauge: feet, inches, and quarters. The app converts it to barrels as you set it, and the reading lands in the tank's history with the trend chart and every measurement before it.

Set a threshold, get the alert
Every tank carries four thresholds (low, critical low, high, critical high), and every pressure gauge has its own. Cross one and a push notification is on your phone within the hour. Tap it and you're on that tank's page, level and trend in front of you. The alert includes the trend, so you read something like "12 in from top (was 16 an hour ago)" and know whether you're driving out now or after coffee.

Hourly readings, real history
Tank levels, pressures, and flow land every hour and stack into history you can actually read: charts, trends, and every device's own health. Every reading is stored, so you build real history instead of a daily snapshot.
• Tank level, to the quarter inch, from a sensor that screws into a 2- or 3-inch fitting on top of the tank
• Tubing, casing, and injection pressure at the wellhead, with the 24-hour average and the daily maximum side by side
• Flow on injection and flow lines, with a no-flow alert. You set how long the meter can read zero before it goes out, because every well is different

Every well on one map
Add a tank battery and its wells: drop a pin on the satellite view, grab your GPS location, or search the exact coordinates. One tap sends driving directions to a pumper or a service company, so a new hand knows exactly where a location is.

Reports that build themselves
Pick what, where, and when (an injection and disposal report, or a lease-by-lease production summary) and it builds itself from your readings: daily barrels, average and peak pressure, days over permit flagged in red. Send it, print it, or download the spreadsheet.

Hand gauges and sensors in one place
Hand-gauged measurements, run tickets, draw tickets, pressure readings, and flow meter readings live in the same app as the sensor readings. On monitored tanks, an occasional hand gauge is just a calibration check against the sensor, and you keep gauging the rest of the battery the way you always have.

A dead sensor never just goes quiet
Battery, signal, and last check-in on every sensor. Low battery or a missed check-in alerts you automatically.

Cameras, one tap away
Solar-powered LTE cameras watch your lease day and night. Live remote viewing and pan-tilt control from anywhere, anytime. The camera runs in its own live-view app, and the Cameras button in LeaseSight takes you straight to it.

One app, phone and desktop
The same product in the truck and at the office: same screens, same numbers. Built mobile-first for one-bar cell service on location.

Your data is yours
It's your production data: levels, pressures, flow, gauge sheets, run tickets, all of it. LeaseSight stores it and puts it on your phone. It doesn't become ours because a sensor read it.

The hardware
The sensors talk to a gateway on the pad, and the gateway sends everything in over LTE. Most operators install the sensors themselves (a few minutes per unit, no wiring, no technician), and professional installation is available if you'd rather have it done. The live sensor readings switch on once we help you get the hardware set up.

Questions? Call or text (618) 841-7941 or (618) 383-1543. You reach a person who knows what a tank battery looks like, not a ticket queue.
leasesight.app