Stroboscope Engineer
Reklamalar mavjud
4,8star
61 ta sharh
10 ming+
Yuklanmalar
Hamma uchun
info
Bu ilova haqida
Stroboscope app for measuring rotating, vibrating, oscillating or reciprocating objects.
It is most commonly used for:
- adjusting speed of rotation - for example adjusting speed of rotation of turntable
- adjusting frequency of vibration
How to use:
1. Start app
2. Set frequency of strobe light (in Hz) using number pickers
3. Press ON/OFF button to start the strobe light
- use button [x2] to double the frequency
- use button [1/2] to halve the frequency
- use button [50 Hz] to set frequency to 50 Hz. This is for turntable speed adjustment.
- use button [60 Hz] to set frequency to 60 Hz. This is also for turntable adjustment.
- activate duty cycle by checking [DUTY CYCLE] check box and adjust duty cycle in percentage. Duty cycle is the percentage of time per cycle when the flash light is on.
- optionally you can calibrate the app by starting calibration from MENU - Calibrate. It is good to do calibration when frequency is changed. You can also set correction time manually in Settings.
Accuracy of the app depends on latency of your device flash light.
It is most commonly used for:
- adjusting speed of rotation - for example adjusting speed of rotation of turntable
- adjusting frequency of vibration
How to use:
1. Start app
2. Set frequency of strobe light (in Hz) using number pickers
3. Press ON/OFF button to start the strobe light
- use button [x2] to double the frequency
- use button [1/2] to halve the frequency
- use button [50 Hz] to set frequency to 50 Hz. This is for turntable speed adjustment.
- use button [60 Hz] to set frequency to 60 Hz. This is also for turntable adjustment.
- activate duty cycle by checking [DUTY CYCLE] check box and adjust duty cycle in percentage. Duty cycle is the percentage of time per cycle when the flash light is on.
- optionally you can calibrate the app by starting calibration from MENU - Calibrate. It is good to do calibration when frequency is changed. You can also set correction time manually in Settings.
Accuracy of the app depends on latency of your device flash light.
Oxirgi yangilanish
Xavfsizlik — dastur ishlab chiquvchilar maʼlumotlaringizni qanday jamlashi va ulashishini tushinishdan boshlanadi. Maʼlumotlar maxfiyligi va xavfsizlik amaliyotlari ilovadan foydalanish, hudud va yoshga qarab farq qilishi mumkin. Bu axborot dastur ishlab chiquvchi tomonidan taqdim etilgan va keyinchalik yangilanishi mumkin.
Bu ilova tashqi hamkorlarga quyidagi turdagi maʼlumotlarini ulashishi mumkin
Ilova tarixi, Ilova axboroti va unumdorlik va Qurilma yoki boshqa identifikatorlar
Ushbu ilova quyidagi axborot turlarini toʻplashi mumkin
Ilova tarixi, Ilova axboroti va unumdorlik va Qurilma yoki boshqa identifikatorlar
Maʼlumotlar uzatish vaqtida shifrlanadi
Maʼlumotlar oʻchmaydi
Reytinglar va sharhlar
4,8
61 ta sharh
Nima yangiliklar
Stroboscope app
v10.5
- Menu - Remove ads
v10.3
- auto calibration - start it from MENU - Calibrate. It is good to run calibration when frequency is changed.
- manually set correction time in Settings
- option to remove ads for app session - MENU - REMOVE ADS
v5.0
- added duty cycle
v10.5
- Menu - Remove ads
v10.3
- auto calibration - start it from MENU - Calibrate. It is good to run calibration when frequency is changed.
- manually set correction time in Settings
- option to remove ads for app session - MENU - REMOVE ADS
v5.0
- added duty cycle
