Omega MoonSwatch Pluto (fan)

Watch Faces - OP DEV

O aplikaciji

A tribute to the Mission to Pluto edition of the space chronograph, rebuilt as a standalone Wear OS watch face: a warm cream dial, three deep maroon registers, a maroon tachymeter bezel, white hour and minute hands and a black seconds hand sweeping over it all.

THE FARTHEST ONE
Pluto is the small world at the far edge of the solar system, and its edition is one of the warmest of the collection: a soft cream dial framed by a rich maroon bezel with its white TACHYMETRE scale, a thin pale green ring between the two, black applied markers and three maroon registers ringed in rose.

THREE REGISTERS
This is a chronograph-STYLE tribute, not a working stopwatch. There is nothing to start and nothing to stop:
• At 6: the running seconds, a black hand that matches the central seconds hand and sweeps in step with it rather than ticking a second behind
• At 10, on the 60 scale: the minutes. At 2, on the 12 scale: the hours. Both turning with the time like the main hands

CLASSIC OR DIAL
The face comes in two views:
• Classic: the whole watch, with the outer maroon TACHYMETRE bezel around the dial
• Dial: a bezel-free view, zoomed so the printed dial runs right to the edge of the screen

ALWAYS-ON DISPLAY THAT STILL LOOKS LIKE THE WATCH
Most watch faces go nearly black in ambient mode and leave you two floating hands. This one keeps the watch on screen: the cream dial, the maroon bezel, the applied markers, the printed minute track and all three registers stay, dimmed down low, with the white hour and minute hands lit on top. What goes out is only what runs, because that is what costs battery: the sweeping seconds and the three register hands. You can read the time at a glance without turning your wrist, and it still looks like the watch you chose. Measured at 12 per cent of full brightness against the 15 per cent Wear OS allows.

MORE
• Central hours and minutes with softly cast shadows, and no complications to fill in
• Standalone: no phone or companion app required
• Built with Watch Face Format for smooth performance and long battery life

NOTHING TO GRANT
You are not asked for any permission. The face carries no code of its own.

HOW TO CUSTOMIZE
Long-press your current watch face and tap Edit, or open it from the picker, then pick Classic or Dial.

COMPATIBILITY
Wear OS 5 and later, round displays. No blend modes are used, so it is not limited to 5.1 and runs on more Wear OS 5 devices.
Note for dual-chip watches (OnePlus Watch 3 and similar): their Power Saver mode only runs the manufacturer's own built-in faces, so any third-party face works in Smart mode only, and the watch warns you when you apply it.

Disclaimer: This is an unofficial, fan-made watch face created by an independent developer. It is not affiliated with, endorsed by, or sponsored by OMEGA or Swatch. All trademarks and brand names belong to their respective owners and are used only to describe the design that inspired this tribute.