Trimble Earthworks GO!
4,8star
16 recenzija
1 hilj.+
Preuzimanja
Svako
info
O aplikaciji
ATTENTION! This is the original Trimble Earthworks GO! app, not to be confused with Trimble Earthworks GO! 2.0. Work with your Trimble distributor to ensure this is the correct app for your installation.
Trimble Earthworks GO! is a machine control platform built with the small contractor in mind. Earthworks GO! automates your compact machine grading attachment so you can complete your projects faster and more accurately. Download the app interface to use with your Earthworks GO! grade control system.
Supercharge your grading projects with a system that just works, right out of the box. Compatible with both Android and iOS smart devices, Earthworks GO! offers fully automatic control of your compact grading attachments with minimal setup required. With its user-friendly interface, integrated setup tutorials, and high-precision sensing technology, Earthworks GO! was built with a single purpose in mind: to save contractors time and money.
Note: Trimble Earthworks GO! requires Trimble machine control hardware. Please contact your local SITECH dealer for more information: https://heavyindustry.trimble.com/en/where-to-buy
Three tiers of the Trimble Earthworks GO! system are available: Slope guidance only, Slope and Depth Offset (Single Laser Receiver), and Slope plus Dual Depth Offsets (Dual Laser Receivers). Your SITECH Dealer can help you choose the system to best address your grading needs.
KNOWN ISSUES
- On some devices the joystick animations may be slow to start. Tapping “Next” or “Back” should refresh the animation and resolve the issue.
- If a Bobcat attachment is powered up with the Trimble LR410 Laser Receivers connected but without the GO! Box connected, the laser receivers may not show up in the Trimble Earthworks GO! application. Cycling power to the system or disconnecting/reconnecting the LR410 receivers will resolve this.
- A “Multiple Lasers Detected” error may be seen when working near reflective objects (glass, machine cabs, metal, etc.). The laser can reflect off these surfaces causing a secondary strike at the receiver. Make every attempt to limit these reflective surfaces. Raising the receivers out of the laser plane may clear this error as well. If the problem persists, contact your local SITECH dealer for the latest LR410 firmware.
- Mobile Data may need to be disabled for some Motorola devices when using Earthworks GO!.
- When changing the combination of a basic attachment and a machine with GO! Switches, the GO! Switch button mapping may be incorrect. If you find this, closing/reopening the app or deselecting/reselecting the attachment will resolve the issue.
Trimble Earthworks GO! is a machine control platform built with the small contractor in mind. Earthworks GO! automates your compact machine grading attachment so you can complete your projects faster and more accurately. Download the app interface to use with your Earthworks GO! grade control system.
Supercharge your grading projects with a system that just works, right out of the box. Compatible with both Android and iOS smart devices, Earthworks GO! offers fully automatic control of your compact grading attachments with minimal setup required. With its user-friendly interface, integrated setup tutorials, and high-precision sensing technology, Earthworks GO! was built with a single purpose in mind: to save contractors time and money.
Note: Trimble Earthworks GO! requires Trimble machine control hardware. Please contact your local SITECH dealer for more information: https://heavyindustry.trimble.com/en/where-to-buy
Three tiers of the Trimble Earthworks GO! system are available: Slope guidance only, Slope and Depth Offset (Single Laser Receiver), and Slope plus Dual Depth Offsets (Dual Laser Receivers). Your SITECH Dealer can help you choose the system to best address your grading needs.
KNOWN ISSUES
- On some devices the joystick animations may be slow to start. Tapping “Next” or “Back” should refresh the animation and resolve the issue.
- If a Bobcat attachment is powered up with the Trimble LR410 Laser Receivers connected but without the GO! Box connected, the laser receivers may not show up in the Trimble Earthworks GO! application. Cycling power to the system or disconnecting/reconnecting the LR410 receivers will resolve this.
- A “Multiple Lasers Detected” error may be seen when working near reflective objects (glass, machine cabs, metal, etc.). The laser can reflect off these surfaces causing a secondary strike at the receiver. Make every attempt to limit these reflective surfaces. Raising the receivers out of the laser plane may clear this error as well. If the problem persists, contact your local SITECH dealer for the latest LR410 firmware.
- Mobile Data may need to be disabled for some Motorola devices when using Earthworks GO!.
- When changing the combination of a basic attachment and a machine with GO! Switches, the GO! Switch button mapping may be incorrect. If you find this, closing/reopening the app or deselecting/reselecting the attachment will resolve the issue.
Ažurirano dana
Sigurnost počinje razumijevanjem na koji način programeri prikupljaju i dijele vaše podatke. Privatnost podataka i sigurnosne prakse se mogu razlikovati ovisno o korištenju, regiji i dobi. Programer je pružio ove informacije i može ih s vremenom ažurirati.
Podaci se ne dijele s trećim stranama
Saznajte više o načinu na koji programeri pružaju izjavu o dijeljenju
Podaci se ne prikupljaju
Saznajte više o načinu na koji programeri pružaju izjavu o prikupljanju
Šta ima novo
In this version, several bugs were fixed:
- System remaining in Autos when viewing the app tray on Google Pixel devices
- Unable to download app from the Play store on Android 13 or newer devices
- System remaining in Autos when viewing the app tray on Google Pixel devices
- Unable to download app from the Play store on Android 13 or newer devices
