Rollset: Pipefitter Calculator

Pinbit

Contient des annoncesAchats via l'appli

À propos de l'application

Rollset is a pipe fitter calculator for the shop and the field. Pipe offsets, rolling offsets, cut lengths, miters and fishmouths, worked out in feet, inches and sixteenths or plain millimeters, with the math shown for every answer so you can check it before you cut.

OFFSETS
• Simple offsets at any angle, from a fixed run or a fixed travel
• Rolling offsets from the roll and the set
• Equal-spread offsets for parallel lines, with the cutback for each line
• A labeled drawing and the working behind every answer

CUT LENGTHS AND FITTINGS
• Cut length between fittings from published takeouts, with the root gap per weld
• Cut any angle from a 90° elbow, with heel and throat marks
• Spool builder: chain fittings and lengths into a cut list with total pipe and welds
• Two-holing a flange on a rolled spool
• Pipe weight, and a fraction, decimal and mm converter

TEMPLATES YOU CAN PRINT
• Miters: single cuts, segmented bends and returns, true wyes, orange peels
• Laterals and fishmouths: the branch cut and the header hole
• Full-size wrap-around templates with a scale check, printed from your phone

BUILT FOR THE JOB
• A fitter's keypad: feet and sixteenths one tap away, big keys you can hit with gloves on
• Sunlight mode for bright days on site
• ASME B16.9 butt-weld elbow takeouts built in, imperial and metric, each as published

ROLLSET PRO: ONE PURCHASE, NO SUBSCRIPTION
• PDF cut sheets for your spools, to share or print
• Saved jobs: keep spools together by job
• The full fitting library: straight tees, pipe schedules (B36.10M) and weld neck flanges (B16.5)
• Every calculator and every template print works without Pro

YOURS, ON YOUR PHONE
• Works fully offline: no signal needed on site
• No account, no sign-up
• Your jobs stay on your phone

Rollset is a calculator. Always check your cuts against your drawings, your WPS and the code that applies to the job.

Nouveautés

First release: offsets, rolling offsets, cut lengths, elbows, miter and fishmouth templates, flange fit-up, spool builder, and Rollset Pro.