RadiaCode

Radiacode Ltd

About this app

The Radiacode is a portable radiation dosimeter that uses a highly sensitive scintillation detector for analyzing environmental radiation levels in real-time.

The dosimeter can be operated in one of three ways: autonomously, through a smartphone app (via Bluetooth or USB), or through PC software (via USB).

In all operation modes, Radiacode:

- Measures current dose rate levels of gamma and X-ray radiation and can display the data in numerical values, or as a graph;
- Calculates and displays the cumulative dose of the gamma and X-ray radiation;
- Calculates and displays the cumulative radiation energy spectrum;
- Signals when dose rate or cumulative radiation dose exceeds thresholds set by a user;
- Continuously stores the above data in non-volatile memory;
- While under the app control, it continuously streams the data to the control gadget for real-time indication and storing it in database.

The app allows:

- Setting Radiacode parameters;
- Displaying all types of measurement results;
- Storing the measurement results in the database with time stamps and location tags;
- Tracking the route data points on Google Maps and displaying them with the dose rate color tags.

In demo mode, the app works with a virtual device. This gives you the opportunity to familiarize yourself with the app before you purchase the device.

Radiacode indicators:

- LCD
- LEDs
- alarm sound
- vibration

Controls: 3 buttons.
Power supply: built-in 1000 mAh Li-pol battery.
Run time: > 10 days.

Compatible with devices Radiacode 10X

Ratings and reviews

The app is good, but it is impossible to use it if notifications are blocked or location permission is not set to All the time. Most of the times I don't need it running in the background (in such cases, I will enable permissions, ideally there would be some toggle in app settings), for just adjusting some settings or viewing the spectra.

App need to be able to set the unit of measurement for temperature in not only the device, but within the app itself. I can control the device and have it display the temperature in F⁰ on the little LCD screen, but the app itself is still always set to display the temperature in C⁰ and seems to have no way of changing it.

mostly all works , but -No backup (for full migration to new phone), - not possible to load and continue selected spectrum(to have on multiple locations /or projects/ own data), - map issues (Google not showing some weeks, osm pixelated). - no sync of location if device powered off BT, but continue record measurements, must be option to continue record location track and make approximated sync between 2 data's on Time-Basis, which was synced before and can be checked actual, if time drift exists

What’s new

Access to video tutorials has been restored.

Corrected product names on the activity measurement page.

Bug fixes.