I've been using this app few months ago when I was introduced to it by a Contractor of one of my projects. The GPS information and ability to write titles and comments for me are very useful for me as an Engineer especially while I'm traveling to remote sites and periodically sites visit of my project. Although a very good app, there's some issues which needed to be fixed: - App crashed upon taking photos - Elevation varies a lot sometimes - New titles reverted to old ones after closing app.
223 people found this review helpful
June 22, 2019
Thank you for your comment. Could you email us because we cannot write too much here?
 Crash: We apologize that it sometimes happens, especially on some brands.
 Elevation: It depends on the hardware. We cannot help you. [Satellite positioning could be better.]
 Reverted: This should be our problem. Could you tell me how it happened?
In the precious version, there was an accuracy monitor on the camera before taking photo. But, now, it only appears if you enable it and it also appears to be on the captured photo. Any assistance that the accuracy to only be displayed on the camera mode, and not the photo? Moreover, Notecam sometimes shuts down while taking any photo.
47 people found this review helpful
December 29, 2022
Sorry about that. On version 5.12 (in February, 2022), NoteCam changed the display of camera preview. For consistency, the preview screen shows the same content as the photo. We will not change back to the original setting. We recommend that you turn on accuracy, or in ⊕ → "Settings" → "Format (GPS coordinates)" → "Accuracy" → Set a warning value.
Dear notecam team. Can you explain me one thing. Why lite version works really well,bit I bought pro version,and from the start, everything was ok,but few weeks ago "accuracy" works so bad. When I'm staying on plays, meters starts going up,like from 7 to 30-40+, in the beginning everything was good,meters goes down from highest to lowest. What the problem? In other case's app are beautiful!
162 people found this review helpful
February 4, 2021
Sorry for the inconvenience. In version 5.10, we use the new location method (FusedLocationProvider) which is recommended by Google. However, if you think that the accuracy is not good enough, you can use the old method (LocationManager). You can set it from "⊕" → "Settings" → "Format (GPS coordinates)" → "Accuracy" → "High accuracy (every second)"