GLASS & ACRYLIC CUT OPTIMIZER

Veeme Media marketing

In-app purchases

About this app

Glass is not plywood. This optimizer knows the difference.

Cut plans for glass shops, glaziers, mirror and shower businesses, acrylic fabricators and sign shops — built around how a sheet is actually broken out.

GLASS: SCORE AND BREAK
• Every layout is edge-to-edge, so it can really be scored and broken
• Scoring removes no material, so the kerf is 0 — not a saw blade
• Minimum breakout strip, so the plan never leaves a sliver you cannot run out
• Per-side edge trim for damaged or flared sheet edges
• Numbered cut sequence, measured from the edge of the piece in your hand
• Already-tempered glass is never sent to the optimizer

ACRYLIC AND PLASTIC, YOUR WAY
• Panel saw, table saw, CNC router, laser or score-and-snap profiles
• Real kerf per machine, with a calibration helper — your measured kerf, not a catalogue number
• Router and laser nest freely with true part spacing; saws get cut trees

THE REMNANT RACK
• Offcuts become stock: size, rack location, value, the job they came from
• Use remnants before opening a new sheet
• Keep/scrap rules per material, so you stop saving useless slivers

MARK THE DEFECTS
• Chips, scratches, coating faults — placed on the sheet with a safety margin
• The optimizer works around them, and you can see it doing it

FINISHED SIZE VS CUT SIZE
• Per-edge edgework — seamed, ground, flat or pencil polish, bevel, miter
• Your own allowance per finish, so the cut blank is right
• Pre-temper workflow: holes, notches and cutouts recorded on the ticket

NUMBERS YOU CAN AUDIT
• Tap any figure to see the arithmetic behind it
• Used material, reusable remnant and true scrap are three different things
• Compare layouts on measurable outcomes — sheets, yield, remnants, cuts — never a mystery score

PRINT AND LABEL
• PDF cutting plan, cut sequence, part list, fabrication tickets
• Labels with finished and cut sizes, edgework, QR or barcode
• CSV export, and CSV or spreadsheet paste on the way in

WORKS OFFLINE. NO ACCOUNT. NO ADS.
Everything stays on your device.

FREE VS PRO
Free is a complete tool on the same engine with the same rules: the cut sequence, comparing solutions, PDF and CSV cutting plans and part lists, and backup. It allows up to 10 jobs, 50 part rows and 250 pieces per run, 2 materials per job and 2 sheet sizes.
Pro is a ONE-TIME purchase, no subscription: remnant rack, defect mapping, costing, labels with QR codes, your logo on reports, pre-temper tickets, CSV import, job revisions and no limits.

A note on the numbers: every default in the app is a STARTING EXAMPLE. Set your own for your equipment, material, thickness and shop practice.