Conduit Bend: Bend Calculator

pierdo

In-app purchases

About this app

Conduit bending calculator for electricians and apprentices. Enter the rise, the angle and the distance to your first bend, and get the marks to put on the pipe, the distance between them and the shrink, in fractions you can read off a tape.

Included from the start
- Offset at 10, 22 1/2, 30, 45 and 60 degrees
- 90 degree stub-up, with the take-up preset for 1/2, 3/4 and 1 inch EMT hand benders or a take-up you type in
- 3 point saddle

Pro, one optional purchase
- 4 point saddle, kick, rolling offset and parallel offset
- Pipe sizes above 1 inch, plus IMC and rigid take-up presets
- Unlimited saved bend sheets
No subscription. The bends above keep working without Pro.

Made for the job site
- A large keypad with 1/2, 1/4, 1/8 and 1/16 keys for inches, and a centimeter setting
- A drawn pipe with the marks on it
- Every result shows its formula. A result that uses a multiplier says whether it is the field multiplier printed on bender charts or exact geometry, and shows what the other model gives, so you can check it against your bender's guide
- When a bend cannot be made, the app says why and gives the nearest value that works, instead of a negative mark
- A bend sheet for a whole stick, 10 feet unless you change it: every mark measured from the end, shrink carried through the earlier bends, and a check that the sheet fits on the stick
- Backup and restore, and a text export of a bend sheet, to a file you choose

Works offline
The calculators, bend sheets and backups need no signal and no account, and your sheets stay on your phone. The only network use is showing the Pro price, buying Pro and restoring it, through Google Play and RevenueCat.

A calculation aid
Conduit Bend is a calculation aid. Verify every mark against local code and your bender manufacturer's marks, and try it on a scrap piece before you bend a stick. It does not give code advice.

What’s new

First release.