Earbud Test measures the Bluetooth latency of your earbuds with the phone's own microphone, in milliseconds and with a ± range: no tapping along, no guessing. It also checks left and right, balance and phase, and keeps results per earbud to compare.
▶ DELAY MEASURED BY THE MICROPHONE
• Hold one earbud to the phone's bottom microphone and press Measure delay. The app plays four short chirps and times when they come back.
• A round counts only when at least 3 of the 4 chirps fit. 5 to 15 rounds are combined into the median in ms with a ± range (about 95 %), each round shown as a dot.
• Measure the phone baseline once with the earbuds disconnected (9 rounds, about 25 s). It is subtracted to show what Bluetooth adds.
• An offset for rhythm games is shown as a reference value.
• The output and device name stay on screen; the test stops if the output changes. A failed test shows no number, only what went wrong and what to do.
▶ LEFT AND RIGHT CHECKED BY THE MICROPHONE
• Hold ONE earbud to the microphone. The app plays a left and a right test sound and compares how loud each one arrives.
• Verdict: Channels correct, Left and right swapped, Same sound on both sides, or Not clear. Same on both sides? It points you to Mono audio in the accessibility settings.
• Balance: 3 tones for the left earbud, then the right one. You get the difference in dB with a ± range, or Even.
• By ear: two low beeps left, three high beeps right, slowly, with auto repeat. Phase A/B with a note on wired 4-pole plug layouts (CTIA and OMTP).
▶ COMPARE EARBUDS AND SETTINGS
• Results are saved per earbud profile. Add a setting label such as "Game mode on" and compare two earbuds, or one earbud with two settings, side by side.
• Two results differ only when the gap is larger than both ± ranges together; otherwise you see No difference.
• Share a result card as an image or export a CSV file. Up to 30 profiles and 300 results.
▶ LISTENING TESTS
• Sweep from 20 Hz to 20 kHz in 10, 30 or 60 s, with pause and the current frequency shown large.
• 1 kHz reference tone, a variable tone in third-octave steps, or both in turn.
• Pink and white noise left, right or both. Stereo pan. Level steps from −42 to −12 dBFS. Synthetic vowel samples at a low and a high pitch.
• Playback range: a sweep through an earbud held to the microphone, as 31 bands relative to 1 kHz, trusted bands drawn bold. Compare earbuds on the same phone.
▶ GOOD TO KNOW
• The total covers phone, Bluetooth and earbud. The Bluetooth part is an estimate: a phone may buffer speaker and Bluetooth audio differently.
• Video apps delay the picture to match the sound, so the delay you notice there can be smaller.
• Apps can't read the Bluetooth codec; check it under Developer options and compare with a setting label.
• Earbuds with ear detection may pause when taken out: wear one, hold the other to the microphone.
• Results are readings from this phone's microphone, never an absolute loudness.
• Only the microphone permission is used. Audio is analysed in memory, not saved or sent; results stay on your phone.
• No test needs an ad to be watched, and no full-screen ad appears while a test is running.
Earbud delay in ms, measured by your mic, plus left/right, balance and sweep