無限迷路
1+
Downloads
Everyone
info
About this game
Is it surprisingly fun to be simple?
[2D maze]
[2D maze (5 x 5)]
[2D maze (3 x 3)]
[3D maze]
You can enjoy 4 types of mazes infinitely.
You can also set the level.
You can exchange your own maze with friends.
Please, to kill time ^^
* The limit of the maze size (level) that can be displayed differs depending on the terminal performance.
[2D maze]
The entire maze is displayed on the screen.
Enter the level and tap "Go to the maze" to display the maze.
The maze is different every time. (Level 1 has a narrow maze, so there are about 4 types)
The level of the maze that was cleared last time is displayed first.
You can change the level by 1 with "+" and "-".
If the maze is large, you can scroll the screen.
"Gray" is the wall and "white" passage.
Tap "↑" "↓" "←" "→" to operate yourself (green) and aim for the exit (red).
When you arrive at the exit, points from 0 to 100 will be displayed depending on the amount of movement of the maze to the exit.
When clearing a new level maze, if the highest score of the cleared level maze is updated, the score list screen will be displayed.
Tap "Import" on the upper right and select the file created in [Create Maze] to display the created maze.
* At level 20, it will take some time to display the maze for the first time.
* If you import a file created by other than this app, we cannot guarantee the operation.
[2D maze (5 x 5)]
The maze is displayed vertically and horizontally 5 squares centered on you (green).
Others are the same as [2D Maze].
However, there is no scroll.
* It does not take time to display the first maze.
[2D maze (3 x 3)]
The maze is displayed in 3 vertical and horizontal squares centered on you (green).
Others are the same as [2D Maze].
However, there is no scroll.
* It does not take time to display the first maze.
[3D maze]
The maze is displayed in 3D.
The 3 squares in front of you will be displayed on the screen.
"Gray" (3 colors) is the wall, "white" passage, and ceiling.
Tap "←" "→" to rotate 90 degrees left and right, and tap "↑" to proceed.
(If you are on either the left or right side of the aisle, or both, you will see an arrow in the direction of the aisle.)
1 square is displayed in 2 columns.
If the block (■) is not displayed continuously and the top and bottom of the wall in front are not displayed, you can turn in that direction.
If the back is black, the passage continues.
If it is the same color as the wall, it is a dead end.
(If "Wall" and "Floor (ceiling)" are set, it will be white instead of black.)
The exit wall is displayed in red.
When you arrive at the exit, points from 0 to 100 will be displayed depending on the amount of movement of the maze to the exit.
When clearing a new level maze, if the highest score of the cleared level maze is updated, the score list screen will be displayed.
Tap "Import" on the upper right and select the file created in [Create Maze] to display the created maze.
* It does not take time to display the first maze.
* When this happens ...
When you tap the maze, the maze of the part you have walked up to now will be displayed in the same way as the 2D maze.
You are yellow and the direction you are facing is indicated by an arrow.
However, it can only be displayed the same number of times as the level.
* If you import a file created by other than this app, we cannot guarantee the operation.
* When a plaza (space) is created in [Create Maze], all the squares are displayed so that they can be bent in the center.
【Setting】
You can set the image for screen display.
When you set an image, the maze will be displayed in the set image, not in color.
You can set "wall", "passage (ceiling)", "self" (2 types), and "exit".
Only one copy can be set.
Select and set the image from the storage etc. of the terminal with "Change", and delete the image set with "Delete".
* In [3D Maze], you cannot set "yourself".
* One image can be set for each of the four types of mazes.
* The image size will be adjusted automatically as much as possible.
* Bmp, gif, jpeg (jpg), png can be used.
* "Self 2" can be set when "Self 1" is set.
* When "Self 1" and "Self 2" are set, "Self 1" and "Self 2" are displayed alternately for each step.
* If you set an image, the processing performance will decrease in the following two cases.
(Processing performance depends on the performance of the terminal.)
[2D maze]: Initial screen display
(If complicated images are set for all, about 3 seconds at Lv5)
[3D maze]: Screen display for each step
(If complicated images are set for all, about 5 seconds per step)
[Maze creation]
A maze of the same size as the level 1 [2D maze] without walls will be displayed.
Tap the floor (white) to turn it into a wall (gray), and conversely, tap the wall (gray) to turn it into a floor (white).
([3D Maze] is for passage display only, so the plaza (space) is not displayed correctly.)
Enter the level at the top and tap "Display", the size of the maze will be the size that matches the level.
The maze before resizing is maintained, but if the size (level) is reduced, the protruding part will not be maintained.
Tap "Output" on the upper right and enter the file name to save the created maze in the download folder.
The saved file can be exchanged with friends by e-mail.
Tap "Import" and select the target file to import the output maze.
* If you import a file created by other than this app, we cannot guarantee the operation.
[List of points]
A list of the highest points of the maze of the cleared level is displayed for each level of each maze.
It was
[2D maze]
[2D maze (5 x 5)]
[2D maze (3 x 3)]
[3D maze]
You can enjoy 4 types of mazes infinitely.
You can also set the level.
You can exchange your own maze with friends.
Please, to kill time ^^
* The limit of the maze size (level) that can be displayed differs depending on the terminal performance.
[2D maze]
The entire maze is displayed on the screen.
Enter the level and tap "Go to the maze" to display the maze.
The maze is different every time. (Level 1 has a narrow maze, so there are about 4 types)
The level of the maze that was cleared last time is displayed first.
You can change the level by 1 with "+" and "-".
If the maze is large, you can scroll the screen.
"Gray" is the wall and "white" passage.
Tap "↑" "↓" "←" "→" to operate yourself (green) and aim for the exit (red).
When you arrive at the exit, points from 0 to 100 will be displayed depending on the amount of movement of the maze to the exit.
When clearing a new level maze, if the highest score of the cleared level maze is updated, the score list screen will be displayed.
Tap "Import" on the upper right and select the file created in [Create Maze] to display the created maze.
* At level 20, it will take some time to display the maze for the first time.
* If you import a file created by other than this app, we cannot guarantee the operation.
[2D maze (5 x 5)]
The maze is displayed vertically and horizontally 5 squares centered on you (green).
Others are the same as [2D Maze].
However, there is no scroll.
* It does not take time to display the first maze.
[2D maze (3 x 3)]
The maze is displayed in 3 vertical and horizontal squares centered on you (green).
Others are the same as [2D Maze].
However, there is no scroll.
* It does not take time to display the first maze.
[3D maze]
The maze is displayed in 3D.
The 3 squares in front of you will be displayed on the screen.
"Gray" (3 colors) is the wall, "white" passage, and ceiling.
Tap "←" "→" to rotate 90 degrees left and right, and tap "↑" to proceed.
(If you are on either the left or right side of the aisle, or both, you will see an arrow in the direction of the aisle.)
1 square is displayed in 2 columns.
If the block (■) is not displayed continuously and the top and bottom of the wall in front are not displayed, you can turn in that direction.
If the back is black, the passage continues.
If it is the same color as the wall, it is a dead end.
(If "Wall" and "Floor (ceiling)" are set, it will be white instead of black.)
The exit wall is displayed in red.
When you arrive at the exit, points from 0 to 100 will be displayed depending on the amount of movement of the maze to the exit.
When clearing a new level maze, if the highest score of the cleared level maze is updated, the score list screen will be displayed.
Tap "Import" on the upper right and select the file created in [Create Maze] to display the created maze.
* It does not take time to display the first maze.
* When this happens ...
When you tap the maze, the maze of the part you have walked up to now will be displayed in the same way as the 2D maze.
You are yellow and the direction you are facing is indicated by an arrow.
However, it can only be displayed the same number of times as the level.
* If you import a file created by other than this app, we cannot guarantee the operation.
* When a plaza (space) is created in [Create Maze], all the squares are displayed so that they can be bent in the center.
【Setting】
You can set the image for screen display.
When you set an image, the maze will be displayed in the set image, not in color.
You can set "wall", "passage (ceiling)", "self" (2 types), and "exit".
Only one copy can be set.
Select and set the image from the storage etc. of the terminal with "Change", and delete the image set with "Delete".
* In [3D Maze], you cannot set "yourself".
* One image can be set for each of the four types of mazes.
* The image size will be adjusted automatically as much as possible.
* Bmp, gif, jpeg (jpg), png can be used.
* "Self 2" can be set when "Self 1" is set.
* When "Self 1" and "Self 2" are set, "Self 1" and "Self 2" are displayed alternately for each step.
* If you set an image, the processing performance will decrease in the following two cases.
(Processing performance depends on the performance of the terminal.)
[2D maze]: Initial screen display
(If complicated images are set for all, about 3 seconds at Lv5)
[3D maze]: Screen display for each step
(If complicated images are set for all, about 5 seconds per step)
[Maze creation]
A maze of the same size as the level 1 [2D maze] without walls will be displayed.
Tap the floor (white) to turn it into a wall (gray), and conversely, tap the wall (gray) to turn it into a floor (white).
([3D Maze] is for passage display only, so the plaza (space) is not displayed correctly.)
Enter the level at the top and tap "Display", the size of the maze will be the size that matches the level.
The maze before resizing is maintained, but if the size (level) is reduced, the protruding part will not be maintained.
Tap "Output" on the upper right and enter the file name to save the created maze in the download folder.
The saved file can be exchanged with friends by e-mail.
Tap "Import" and select the target file to import the output maze.
* If you import a file created by other than this app, we cannot guarantee the operation.
[List of points]
A list of the highest points of the maze of the cleared level is displayed for each level of each maze.
It was
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
No data collected
Learn more about how developers declare collection
What's new
【20230824】
ポリシー対応
【20221001】
微調整
【20220430】
３Ｄ迷路に通路がある方向に矢印表示追加
【20210516】
・コングラチュレーション画面追加
・点数機能追加
【20210504】
・迷路作成機能追加
【20210429】
・画像設定機能追加
【20210424】
・【３Ｄ迷路】不具合修正
【20210313】
初版
ポリシー対応
【20221001】
微調整
【20220430】
３Ｄ迷路に通路がある方向に矢印表示追加
【20210516】
・コングラチュレーション画面追加
・点数機能追加
【20210504】
・迷路作成機能追加
【20210429】
・画像設定機能追加
【20210424】
・【３Ｄ迷路】不具合修正
【20210313】
初版
