BLE Simple Remote
1 hilj.+
Preuzimanja
Svako
info
O aplikaciji
The purpose of the app is to control remote hardware like ESP32, Arduino, Raspberry Pi ...
Default the Nordic UART UUIDs are used for service and characteristic. You can change them with the option menu Configuration.
The first optional information is a channel, which has the range from 0 to 3.
Afterwards 2 positions are handled as bytes and are terminated with a zero byte.
The range of the positions (power) is between -100 and 100.
Mode standard enabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, 0, 0
RIGHT: [channel,] power, 0, 0
MIDDLE: [channel,] 0, 0, 0
Mode standard disabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, power, 0
RIGHT: [channel,] power, power, 0
MIDDLE: [channel,] 0, 0, 0
Byte Mode enabled: Optional channel and 3 positions are transfered as bytes
Byte Mode disabled: Optional channel (seperated by colon) and 3 positions are transfered as text seperated by colon (ended by \n)
Zero: On Release automatic return to zero values. [channel], 0, 0, 0
Channel (Ch.): Enable optional channel information (first byte or text seperated by colon)
Power: Slider from 0 to 100
Default the Nordic UART UUIDs are used for service and characteristic. You can change them with the option menu Configuration.
The first optional information is a channel, which has the range from 0 to 3.
Afterwards 2 positions are handled as bytes and are terminated with a zero byte.
The range of the positions (power) is between -100 and 100.
Mode standard enabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, 0, 0
RIGHT: [channel,] power, 0, 0
MIDDLE: [channel,] 0, 0, 0
Mode standard disabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, power, 0
RIGHT: [channel,] power, power, 0
MIDDLE: [channel,] 0, 0, 0
Byte Mode enabled: Optional channel and 3 positions are transfered as bytes
Byte Mode disabled: Optional channel (seperated by colon) and 3 positions are transfered as text seperated by colon (ended by \n)
Zero: On Release automatic return to zero values. [channel], 0, 0, 0
Channel (Ch.): Enable optional channel information (first byte or text seperated by colon)
Power: Slider from 0 to 100
Ažurirano dana
Sigurnost počinje razumijevanjem na koji način programeri prikupljaju i dijele vaše podatke. Privatnost podataka i sigurnosne prakse se mogu razlikovati ovisno o korištenju, regiji i dobi. Programer je naveo ove informacije i može ih s vremenom ažurirati.
Podaci se ne dijele s trećim stranama
Saznajte više o načinu na koji programeri pružaju izjavu o dijeljenju
Podaci se ne prikupljaju
Saznajte više o načinu na koji programeri pružaju izjavu o prikupljanju
Posvećen poštovanju Pravila za porodice na Playu
Što je novo
new value transmission
Podrška za aplikaciju
Informacije o programeru
Ferdinand Stückler
stuecklerf@gmail.com
Professor-Franz-Spath-Ring 41/19
8042 Graz
Austria
undefined
