BLE Simple Remote
1 Tsg.+
Downloads
Jedes Alter
info
Über diese App
The purpose of the app is to control remote hardware like ESP32, Arduino, Raspberry Pi ...
Default the Nordic UART UUIDs are used for service and characteristic. You can change them with the option menu Configuration.
The first optional information is a channel, which has the range from 0 to 3.
Afterwards 2 positions are handled as bytes and are terminated with a zero byte.
The range of the positions (power) is between -100 and 100.
Mode standard enabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, 0, 0
RIGHT: [channel,] power, 0, 0
MIDDLE: [channel,] 0, 0, 0
Mode standard disabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, power, 0
RIGHT: [channel,] power, power, 0
MIDDLE: [channel,] 0, 0, 0
Byte Mode enabled: Optional channel and 3 positions are transfered as bytes
Byte Mode disabled: Optional channel (seperated by colon) and 3 positions are transfered as text seperated by colon (ended by \n)
Zero: On Release automatic return to zero values. [channel], 0, 0, 0
Channel (Ch.): Enable optional channel information (first byte or text seperated by colon)
Power: Slider from 0 to 100
Default the Nordic UART UUIDs are used for service and characteristic. You can change them with the option menu Configuration.
The first optional information is a channel, which has the range from 0 to 3.
Afterwards 2 positions are handled as bytes and are terminated with a zero byte.
The range of the positions (power) is between -100 and 100.
Mode standard enabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, 0, 0
RIGHT: [channel,] power, 0, 0
MIDDLE: [channel,] 0, 0, 0
Mode standard disabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, power, 0
RIGHT: [channel,] power, power, 0
MIDDLE: [channel,] 0, 0, 0
Byte Mode enabled: Optional channel and 3 positions are transfered as bytes
Byte Mode disabled: Optional channel (seperated by colon) and 3 positions are transfered as text seperated by colon (ended by \n)
Zero: On Release automatic return to zero values. [channel], 0, 0, 0
Channel (Ch.): Enable optional channel information (first byte or text seperated by colon)
Power: Slider from 0 to 100
Aktualisiert am
Was die Sicherheit angeht, solltest du als Erstes verstehen, wie Entwickler deine Daten erheben und weitergeben. Die Datenschutz- und Sicherheitspraktiken können je nach deiner Verwendung, deiner Region und deinem Alter variieren. Diese Informationen wurden vom Entwickler zur Verfügung gestellt und können jederzeit von ihm geändert werden.
Keine Daten werden mit Drittunternehmen oder -organisationen geteilt
Keine Daten erhoben
Hat sich verpflichtet, den Google Play-Richtlinien für familienfreundliche Inhalte zu folgen
Neuerungen
new value transmission
Support für diese App
Informationen zum Entwickler
Ferdinand Stückler
stuecklerf@gmail.com
Professor-Franz-Spath-Ring 41/19
8042 Graz
Austria
undefined
