BLE Simple Remote
1 ming+
Yuklanmalar
Hamma uchun
info
Bu ilova haqida
The purpose of the app is to control remote hardware like ESP32, Arduino, Raspberry Pi ...
Default the Nordic UART UUIDs are used for service and characteristic. You can change them with the option menu Configuration.
The first optional information is a channel, which has the range from 0 to 3.
Afterwards 2 positions are handled as bytes and are terminated with a zero byte.
The range of the positions (power) is between -100 and 100.
Mode standard enabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, 0, 0
RIGHT: [channel,] power, 0, 0
MIDDLE: [channel,] 0, 0, 0
Mode standard disabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, power, 0
RIGHT: [channel,] power, power, 0
MIDDLE: [channel,] 0, 0, 0
Byte Mode enabled: Optional channel and 3 positions are transfered as bytes
Byte Mode disabled: Optional channel (seperated by colon) and 3 positions are transfered as text seperated by colon (ended by \n)
Zero: On Release automatic return to zero values. [channel], 0, 0, 0
Channel (Ch.): Enable optional channel information (first byte or text seperated by colon)
Power: Slider from 0 to 100
Default the Nordic UART UUIDs are used for service and characteristic. You can change them with the option menu Configuration.
The first optional information is a channel, which has the range from 0 to 3.
Afterwards 2 positions are handled as bytes and are terminated with a zero byte.
The range of the positions (power) is between -100 and 100.
Mode standard enabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, 0, 0
RIGHT: [channel,] power, 0, 0
MIDDLE: [channel,] 0, 0, 0
Mode standard disabled:
UP: [channel,] 0, power, 0
DOWN: [channel,] 0, -power, 0
LEFT: [channel,] -power, power, 0
RIGHT: [channel,] power, power, 0
MIDDLE: [channel,] 0, 0, 0
Byte Mode enabled: Optional channel and 3 positions are transfered as bytes
Byte Mode disabled: Optional channel (seperated by colon) and 3 positions are transfered as text seperated by colon (ended by \n)
Zero: On Release automatic return to zero values. [channel], 0, 0, 0
Channel (Ch.): Enable optional channel information (first byte or text seperated by colon)
Power: Slider from 0 to 100
Oxirgi yangilanish
Xavfsizlik — dastur ishlab chiquvchilar maʼlumotlaringizni qanday jamlashi va ulashishini tushunishdan boshlanadi. Maʼlumotlar maxfiyligi va xavfsizlik amaliyotlari ilovadan foydalanish, hudud va yoshga qarab farq qilishi mumkin. Bu axborot dastur ishlab chiquvchi tomonidan taqdim etilgan va keyinchalik yangilanishi mumkin.
Tashqi hamkorlarga hech qanday axborot ulashilmagan
Dastur ishlab chiquvchilar axborot ulashilishini qanday aytishi haqida batafsil
Hech qanday maʼlumot jamlanmagan
Dastur ishlab chiquvchilar axborot jamlanishini qanday aytishi haqida batafsil
Google Play “Butun oila uchun” dasturi qoidalariga amal qiladi
Nima yangiliklar
new value transmission
Ilova yuzasidan yordam
Dasturchi haqida
Ferdinand Stückler
stuecklerf@gmail.com
Professor-Franz-Spath-Ring 41/19
8042 Graz
Austria
undefined
