Jetting For KTM dirt bike

ISEnet

About this app

This app will help you configure the carb of your 2 strokes KTM dirt bike (SX, MX, XC, EXC, MXC, SXS) to improve its performance with no need of repair manual or owner's manual. Using weather conditions and your engine / carburator configuration, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on jetting configuration and adapt it to weather changes.

In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must enter the altitude and weather data.

The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the other tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine and carburetor.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, model (KTM SX, MX, XC, EXC, MXC, SXS) and carburator (Keihin, Mikuni). Besides, you can enter the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.

Valid for the following models from 2005 to 2024:
- 50 SX: 2005-2024.
- 50 SX Factory Edition: 2021-2024.
- 50 SX Mini: 2017-2024.
- 65 SX: 2017-2024.
- 85 SX: 2005-2024.
- 105 SX: 2006-2012.
- 125 SX: 2005-2022.
- 125 SXS: 2005-2007.
- 125 EXC: 2005-2016.
- 125 XC: 2017-2018.
- 144 SX: 2007-2008.
- 150 SX: 2009-2022.
- 150 XC: 2010, 2012, 2013, 2014, 2017, 2018, 2019.
- 200 EXC: 2005-2016.
- 200 XC: 2005-2012.
- 250 SX: 2005-2022.
- 250 SXS: 2005-2007.
- 250 XC: 2007-2019.
- 250 EXC: 2005-2018.
- 300 EXC: 2005-2018.
- 300 XC: 2009-2018.
- 300 MXC: 2005.
* Please note that the application is valid only for engines that use carburetor. Not valid for fue injection engines.

If you click in "More from developer" you can find the other carburation tools for 2 strokes & 4 strokes motocross, SX, MX, enduro, supercross, off-road race motorcycles: Yamaha YZ, Suzuki RM, Honda CR, Honda CRF, Kawasaki KX, Husqvarna 2T.

The app is valid for both PRO or beginners dirtriders.

PERMISSIONS:
The application needs the following permissions:
- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.
- Storage: it's used for storing the configuration preferences.
- Network communication: it's used for invoke the external service which provides the current weather conditions
- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.

Ratings and reviews

a shame this app doesn't accommodate for the sx50 or sx50 mini!! would be great for all the other models

Waste of money. Will not locate a GPS for weather. Tried for the last couple of days. Don't waste your money

Good app to setup ktm dirt bikes

What's new

Models updated until the year 2024.
Improved service for obtaining weather information.
Minor changes in user interface.
Performance optimizations.