Bouncy Castle Safety Log
বিজ্ঞাপনযুক্তএপত কৰা ক্ৰয়
সকলো
info
০+
ডাউনল’ড
সকলো
অধিক জানক
এই এপ্টোৰ বিষয়ে
WHAT IT DOES
BounceLog is a private, offline-first safety-check log for inflatable and bouncy castle hire operators who do their own setup and handover.
- Record a wind-speed reading for every hire (mph + Beaufort)
- Record the internal pressure and the anchorage you used
- Run a pre-use check: blower, anchor points, ground type, fabric and seams, mats, electrical, deflation test, capacity and supervision
- Capture a signed handover sheet with the hirer
- Attach photos of anchorage and any damage
- Group hires by unit and keep your PIPA / ADiPS tag and annual-inspection date
- Export a PDF audit pack to share with your insurer or local authority
- Keep your own records on your own device
WHO IT'S FOR
- One-van and family inflatable / bouncy castle hire operators
- Operators in the UK, Ireland, Australia and New Zealand working to BS EN 14960 or AS 3533.4.1 and HSE guidance
- Sole traders who set up, check, and hand over the unit themselves
ABOUT YOUR RECORDS
Units, hires, checks and photos are stored on your device. BounceLog is a record-keeping tool. It is not a safety inspection, does not certify that any inflatable is safe to use, and does not replace the annual inspection by a competent person (PIPA / RPII / ADiPS). You are responsible for following the standards and guidance and for the accuracy of your records. Always check the manufacturer's operating manual.
Contact: support@clearstackapps.com
BounceLog is a private, offline-first safety-check log for inflatable and bouncy castle hire operators who do their own setup and handover.
- Record a wind-speed reading for every hire (mph + Beaufort)
- Record the internal pressure and the anchorage you used
- Run a pre-use check: blower, anchor points, ground type, fabric and seams, mats, electrical, deflation test, capacity and supervision
- Capture a signed handover sheet with the hirer
- Attach photos of anchorage and any damage
- Group hires by unit and keep your PIPA / ADiPS tag and annual-inspection date
- Export a PDF audit pack to share with your insurer or local authority
- Keep your own records on your own device
WHO IT'S FOR
- One-van and family inflatable / bouncy castle hire operators
- Operators in the UK, Ireland, Australia and New Zealand working to BS EN 14960 or AS 3533.4.1 and HSE guidance
- Sole traders who set up, check, and hand over the unit themselves
ABOUT YOUR RECORDS
Units, hires, checks and photos are stored on your device. BounceLog is a record-keeping tool. It is not a safety inspection, does not certify that any inflatable is safe to use, and does not replace the annual inspection by a competent person (PIPA / RPII / ADiPS). You are responsible for following the standards and guidance and for the accuracy of your records. Always check the manufacturer's operating manual.
Contact: support@clearstackapps.com
আপডে’ট কৰা তাৰিখ
বিকাশকৰ্তাসকলে আপোনাৰ ডেটা কেনেকৈ সংগ্ৰহ আৰু শ্বেয়াৰ কৰে সেয়া বুজি পোৱাৰ জৰিয়তে সুৰক্ষা আৰম্ভ হয়। ডেটাৰ গোপনীয়তা আৰু সুৰক্ষা প্ৰণালী আপোনাৰ ব্যৱহাৰ, অঞ্চল আৰু বয়সৰ ওপৰত ভিত্তি কৰি ভিন্ন হ’ব পাৰে। বিকাশকৰ্তাগৰাকীয়ে এই তথ্যখিনি প্ৰদান কৰিছে আৰু সময়ৰ লগে লগে এয়া আপডে’ট কৰিব পাৰে।
নতুন কি আছে
Initial release. Record per-hire wind, pressure and anchorage checks, run a pre-use safety check, capture a signed handover with the hirer, and export a PDF audit pack. Built around BS EN 14960 / AS 3533.4.1.
সকলো
অধিক জানকএপৰ সমৰ্থন
বিকাশকৰ্তাৰ বিষয়ে
ISOLUTION TECHNOLOGIES LTD
hello@clearstackapps.com
124-128 City Road
LONDON
EC1V 2NX
United Kingdom
+1 657-229-2693
