Serial USB Terminal
Kupovina unutar aplikacije
4,3star
2,13 hilj. recenzija
500 hilj.+
Preuzimanja
Svako
info
O aplikaciji
'Serial USB Terminal' is a line-oriented terminal / console app for microcontrollers, arduinos and other devices with a serial / UART interface connected with a USB to serial converter to your android device.
This app supports USB to serial converters based on
- FTDI FT232, FT2232, ...
- Prolific PL2303
- Silabs CP2102, CP2105, ...
- Qinheng CH340, CH341
and devices implementing the USB CDC protocol like
- Arduino using ATmega32U4
- Digispark using V-USB software USB
- BBC micro:bit using ARM mbed DAPLink firmware
To connect USB to serial converters, your android device must support USB OTG aka. USB host mode. Most devices support this today, but in case of issues check with one of the various USB test apps, if host mode is enabled in your android kernel.
All features in this app are free. In-App purchase is only used for the 'Donate' option.
Looking for source code? Here you find a simplified variant of this app:
https://github.com/kai-morich/SimpleUsbTerminal
This app supports USB to serial converters based on
- FTDI FT232, FT2232, ...
- Prolific PL2303
- Silabs CP2102, CP2105, ...
- Qinheng CH340, CH341
and devices implementing the USB CDC protocol like
- Arduino using ATmega32U4
- Digispark using V-USB software USB
- BBC micro:bit using ARM mbed DAPLink firmware
To connect USB to serial converters, your android device must support USB OTG aka. USB host mode. Most devices support this today, but in case of issues check with one of the various USB test apps, if host mode is enabled in your android kernel.
All features in this app are free. In-App purchase is only used for the 'Donate' option.
Looking for source code? Here you find a simplified variant of this app:
https://github.com/kai-morich/SimpleUsbTerminal
Ažurirano dana
Sigurnost počinje razumijevanjem na koji način programeri prikupljaju i dijele vaše podatke. Privatnost podataka i sigurnosne prakse se mogu razlikovati ovisno o korištenju, regiji i dobi. Programer je pružio ove informacije i može ih s vremenom ažurirati.
Podaci se ne dijele s trećim stranama
Saznajte više o načinu na koji programeri pružaju izjavu o dijeljenju
Podaci se ne prikupljaju
Saznajte više o načinu na koji programeri pružaju izjavu o prikupljanju
Ocjene i recenzije
4,3
1,98 hilj. recenzija
Šta ima novo
1.54 2024-06-02
NEW disable send button if send takes more than 0.2sec
FIX sending large data at very low baud rate caused 'connection lost'
FIX reduce CPU/battery usage when control lines are shown
1.53 2024-01-12
FIX improved notification enabling
1.52 2024-01-09
NEW added "Settings > Misc. > Show notification when connected" because not shown in notification bar by default on Android 14
FIX Android 14 USB permission dialog response handling
NEW disable send button if send takes more than 0.2sec
FIX sending large data at very low baud rate caused 'connection lost'
FIX reduce CPU/battery usage when control lines are shown
1.53 2024-01-12
FIX improved notification enabling
1.52 2024-01-09
NEW added "Settings > Misc. > Show notification when connected" because not shown in notification bar by default on Android 14
FIX Android 14 USB permission dialog response handling
Podrška za aplikaciju
Informacije o programeru
Kai Morich
mail@kai-morich.de
Gerhart-Hauptmann-Straße 13
68766 Hockenheim
Germany
undefined
