„instax SHARE“ je oficiální aplikace společnosti FUJIFILM, kterou lze používat k tisku obrázků ze smartphonů na tiskárně instax SHARE smartphone printer.
[Vyberte si nejlepší snímek!]
„instax SHARE“ je aplikace umožňující tisk snímků ze smartphonu s využitím tiskárny smartphone printer instax SHARE SP-1/SP-2/SP-3(FUJIFILM). Za méně než minutu můžete vytvářet nádherné výtisky jen tím, že zvolíte nejlepší snímky ve smartphonu nebo tabletu.
[Podporovaná tiskárna]
FUJIFILM instax SHARE Smartphone Printer SP-1/SP-2/SP-3
* Staré modely tiskáren nejsou podporovány.
[Podporované smartphony]
Android 4.0.3 nebo novější
*With regard to customers who use Android ver. 6.0.x or later, there is a case that the connection between the smartphone and the printer does not work if GPS function is OFF. For the customer corresponding to this phenomenon, please turn on the GPS function when you use instax SHARE.
CAUTION: SETTINGS
If you are using Android 6.0 or later and cannot connect to the printer, check the following settings.
(1) GPS Settings
It is sometimes not possible to connect to the printer when the GPS function of your Android device is turned off.Follow the steps below to turn your GPS function on.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting".
(2) Tap "Location".
(3) If "Position Information" is off, turn it on.
(4) Try connecting to the printer.
(5) If communication is still not possible after performing steps (1) to (3), turn the position information setting in (3) off and back on again, then try connecting to the printer again.
(2) Authority settings in the "instax SHARE" app
Some or all of the functions of the "instax SHARE" app cannot be used unless the following authority settings are enabled for the app.
Please follow the steps below to enable these authority settings. We apologize for the inconvenience.
Example: Nexus7 (Android 6.0.1)
(1) Tap "Setting"
(2) Tap "Apps"
(3) Tap "instax SHARE"
(4) Tap "Permission"
(5) Enable "Camera", "Storage" and "Location".
[Jak tisknout]
Tisk fotografií pořízených pomocí smartphonů.
1. Zapněte tiskárnu.
2. Spusťte aplikaci instax SHARE.
3. Vyberte snímek z části Fotografie nebo SNS, nebo pořiďte snímek pomocí fotoaparátu smartphonu.
4. Po vybrání snímku stiskněte tlačítko Upravit a upravte snímek (velikost, otočení, filtr a šablona).
5. Vepište zprávu do šablony, pokud je vybrána šablona podporující vkládání textu.
6. Po dokončení úprav klepněte na možnost „Připojte a tiskněte.“.
7. Když tisknete poprvé, budete vyzváni k zadání hesla pro tiskárnu. Zadejte výchozí heslo uvedené v uživatelské příručce k tiskárně.
Datum aktualizace
27. 11. 2023