Make your job easier with our handy refrigerant charging and diagnostic HVAC app - HVAC Buddy®. If you are servicing equipment the best way to begin diagnosis and determine the proper refrigerant charge is to use HVAC Buddy, a set of gauges, and a thermometer.

• Superheat for fixed capillary or Subcool forTXV/EXV systems
• Calculates targeted vs. actual Subcooling
• 73 refrigerants including R-22 (Freon), R-410A (Puron), R-404A, R-134A
• Airflow / Delta-T / TEET Calculation
• Diagnosis tab for leaks, overcharge, contaminants, etc.
• Email System Status Report
• Imperial (IP) or Metric (SI)
• Use Target Superheat and Subcool tables or enter manually
• Fast! Update values realtime with Temp and Press sliders
• User friendly with several pages of step by step instructions

if the early outdoor temperature is 75F and you charge the system to a “beer can cold” suction line your system is likely improperly charged. Later in the afternoon high temperatures will increase head pressure and the resulting overcharge means a lower than desired superheat and wasted energy. Not good!

Features:

Use HVAC Buddy to enter refrigerant, temperatures, and pressures. The math is done for you to display Superheat or SubcoolingTarget, Actual, and Difference. Use temperature and pressure sliders to see what happens in realtime when these values change. HVAC Buddy contains generic charts for target Superheat and Subcool as well as pressure-temperature tables for 71 Refrigerants. Temperature data for your pressure is displayed on the refrigerant row and changes can easily be viewed by moving the pressure slider. Add or recover refrigerant to get the Actual value to within the displayed target Superheat or Subcool range.

Diagnosis tab - shows common causes for high and low superheat, subcooling.

Instructions - Several pages of detailed step by step instructions.

Imperial/Metric - View units in Fahrenheit/Celsius or psi/kPa.

Airflow - For cooling, compares a targeted difference across the coil vs. actual. Also called Delta-T or Target Evaporator Exit Temperature (TEET). Sliders change values in realtime.

System Status Report - Use the email tab to create defaults for email addresses, subject, and System Status Report introductory text. Tap the email button and these values are incorporated into a formatted page including all the parameters recorded in HVAC Buddy. Edit the email and / or add contacts. Then on each service call it's just a couple taps to send a personalized report.

Note: To access Diagnostics, Email, and Instructions use your phones menu button.

This app does NOT have a traditional PT Chart display. However, you can view temperatures in the upper left hand corner given any vapor line pressure (Superheat tab) or Liquid leaving pressure (Subcooling tab).

Accolades and Awards:
----------------------------
HVAC Buddy ranked #2 in ContractingBusiness.com readers choice of top 10 contracting apps.

HVAC Buddy was featured by the California Association of HERS Raters and is CalHERS approved!

http://calhers.org/

"Very cool app. I can see California really running with this as we have strict requirements for verification." - John Richau, Executive Director, Calhers

"an excellent programme" - Charlie Richards

About Powertrade
--------------------------
Powertrade is the number one developer of mobile HVAC apps with professional looking, proven apps in the hands of over 20,000 users worldwide.

Powertrade HVAC Buddy® Applications:
-------------------------
NEW!
HVAC Buddy® Load Calc - Improve accuracy when sizing equipment, demonstrate professionalism on the job, and add substance to your proposals by using our heat loss and heat gain calculation app.

HVAC Buddy® Load Calc (Apple) - Also available on iOS devices - iPhone, iPad

HVAC Buddy® Duct Calc - Powerful, real-time interface to help you choose optimal duct sizes.

HVAC Buddy® Pressure Temperature - PT Chart with 71 Refrigerants in Metric or Imperial units.

The HVAC Quick Load for Android is the one and only rule-of-thumb HVAC heating and cooling load application for Google Android mobile devices. This app performs rule-of-thumb HVAC cooling and heating load calculations for many types of commercial, industrial, institutional, and residential buildings. It allows you to quickly calculate the total required cooling and heating loads (in BTU/hr or Tonnage) and air flows (CFM or L/s) by inputting just the building type, total square area and number of people.

You can also email all of the inputs and results to any email address.

The basis of the calculations for this utility come from various authoritative HVAC texts that list average cooling and heating load values per square foot for many building types.

All values can be displayed in English (IP) and Metric (SI) units.

The following is a sample of some of the types of buildings that can be modeled:

1. Cocktail Lounges, Bars, Taverns, Clubhouses
2. Computer Rooms
3. Dining Halls, Lunch Rooms, Cafeterias, Luncheonettes
4. Hospital Patient Rooms, Nursing Home Patient Rooms
5. Jails
6. Kitchens
7. Libraries, Museums
8. Malls, Shopping Centers
9. Medical/Dental Centers, Clinics, and Offices
10. Nightclubs
11. Offices, Commercial
12. ..... and many more

This app is great for use out in the field to quickly analyze the cooling and heating properties of a building. However, please note, that it is by no means a substitute for rigorous heating and cooling load calculations, and HVAC equipment and materials should not be selected based upon the results from this application.

Improve accuracy when sizing equipment, demonstrate professionalism on the job, and add substance to your proposals by using our heat loss and heat gain calculation app - HVAC Buddy® Load Calc.

• Database of Company, Customer, and Project information on your device
• Multiple Projects for one Customer
• Project and customer Sorting and Filtering capability
• Establish Project Templates, Copy Projects, utilize Default Project
• Quickly View total Heating and Cooling Loads
• Computes Duct Gains and Losses based on design type, duct insulation, tightness
• Allows simultaneous Infiltration and Ventilation
• Multiple Units of Measure, easily switch back and forth
• Heating, Cooling, and Combined charts at Project and Room levels six charts in all
• Allows Heating only, Cooling only, or both at Project level as well as individual item overrides
• Email Charts and Project Values
• Outdoor Design Weather Database over 1800 cities included with provision for custom values
Features:

HVAC Buddy Load Calc allows you to enter all the construction characteristics relating to heat gains and losses for the purpose of calculating the total building loads for heating and cooling. This app simplifies the process of collecting and recording information for presentation in a meaningful context. For this or any app of this nature you must be familiar with and have knowledge of construction materials and measuring skills to do a load calculation. In other words, the data entered must be good and accurate for meaningful results.

Comes with a "Default" project containing all the construction types. Whenever new loads are created they may be copied from the Default project or any other load within the project. Create new Projects by copying from the Default project or create your own template projects to improve efficiency. Project may be filtered by staus - New, Template, Scheduled, or Complete.

Comes with one Example Project in three stages. The first stage "Ex 1 Block" is a simple block load analysis with inefficent ducting. The second stage "Ex 1 Block w/Improved Ducts" shows the improved lower loads resulting from improvements in duct sealing as well as moving to R8 material in the ducts. The third stage "Ex 1 Block w/Rooms" is the same house with room by room loads.

Loads: Above Grade Walls, Basement Walls, Ceilings, Floors, Partition Ceilings, Partition Walls, Doors, Windows, Skylights, Blower Heat, Infiltration, Ventilation, and Internal Gains.

Opening Area Calculation: Calculates and automatically subtracts opening area for walls with attached doors and windows. In addition, if you elect to specify a wall orientation windows associated with the wall can optionally inherit the wall orientation.

Note: Many features are accessed using your device (phone) Menu key.

For more screenshots and information visit the website at the link provided.

Documentation covers creating, copying a new project. Please feel free to use the support link to ask any questions on how to use, etc. Your question helps improve future documentation updates.

If you have any problems with the app please email support with information describing the issue so that we may reproduce the problem and correct.

For the fastest response to questions or support there is a support link from within the application or use the support email link from this page.

About Powertrade
--------------------------
Powertrade is the number one developer of mobile HVAC apps with professional looking, proven apps in the hands of over 20,000 users worldwide.

Powertrade HVAC Buddy® Applications:
-------------------------
HVAC Buddy® Load Calc (Apple) - This app is also available on iOS devices - iPhone, iPad

HVAC Buddy® - Refrigerant charging and diagnostics

HVAC Buddy® Duct Calc - Powerful, simple to use real-time interface to help you choose optimal duct sizes

HVAC Buddy® Pressure Temperature - Traditional PT Chart with 71 Refrigerants in Metric or Imperial units

Refrigerant PT Chart

• 75 Refrigerants
• Pressure Units psig/inHg, kPag, kPa, psig, psia, atm, inHg, MPa, barg, bara
• Temp Units °F, °C, Kelvin

Temperature Tab
• 1 °F Temperature increments
• Bubble and Dew Pressures on same line

Pressure Tab
• 1 psi Pressure increments
• Bubble and Dew Temperatures on same line

Settings Tab
• Select Pressure Units
• Select Temperature Units
• Select Refrigerants
• Refrigerant Properties

Thank you for looking at HVAC Buddy products. We do our best to make the best products possible to improve your productivity. If you feel there is any way we can improve please use the contact email link or support link from within the app.

About Powertrade
--------------------------
Powertrade is the number one developer of mobile HVAC apps with professional looking, proven apps in the hands of over 20,000 users worldwide.

Powertrade HVAC Buddy® Applications:
-------------------------
NEW!
HVAC Buddy® Load Calc - Improve accuracy when sizing equipment, demonstrate professionalism on the job, and add substance to your proposals by using our heat loss and heat gain calculation app.

HVAC Buddy® Load Calc (Apple) - Also available on iOS devices - iPhone, iPad

HVAC Buddy® - Refrigerant charging and diagnostics

HVAC Buddy® Duct Calc - Powerful tool with a simple to use real-time interface to help you choose optimal duct sizes.

This app will provide SMACNA compliant options for rectangular duct with dimensions from 1 inch to 120 inches for applications from negative to positive ten inch water gage.

The scenarios for the app are limited to joint lengths of 4, 5, and 6 feet. The transverse connections are limited to T1 (flat drive), T5 (flat slip), T10, 11, and 12 (standing slips) and T25 a or b (TDC/TDF). Where appropriate the app will also provide options for intermediate reinforcement. The full range of reinforcement spacing options is 6, 5, 4, 3, 2 ½, and 2 feet.

In most cases the app will provide options for internal reinforcements and external reinforcements. Internal options are limited to EMT conduit tie rods and external reinforcements are limited to angles. Enough information is provided so users can choose other options from SMACNA’s Standard.

The output of the app is a written description of the duct as well as a graphic representation. Users can view the report on-screen or email it.

This app does not provide every possible solution found in SMACNA’s standard and it will not provide every detail. For example, the app does not provide requirements for the proper attachment of the reinforcements. The app is intended to be used in conjunction with SMACNA’s HVAC Duct Construction Standard.

The best and number one selling duct sizing tool for Android devices with thousands of happy users. For less than the cost of a cardboard wheel ductulator always have a fast, accurate way to analyze ducts for design (by Airflow) or existing installations (by Size).

Airflow Tab
• Calc decimal & rounded sizes for any aspect ratio
• Solve for Volume, Aspect Ratio, Friction, or Velocity

Size Tab
• Calc Friction and Velocity given duct size

Settings Tab:
• Enter various units - Airflow (cfm, m3/s, l/s, m3/hr) Friction (in/100', Pa/30m), Duct Sizing (in, cm), Velocity (ft/min, m/s)
• Define standard air - Altitude (ft, meter), Temperature (Fahrenheit, Celsius), Relative Humidity (pct)
• Displays calculated Kinematic Viscosity (ft2/s) and Specific Volume (ft3/lb)

Material Types:
• PVC
• Aluminum
• Galvanized Steel
• Spiral Steel
• Smooth Liner
• Fiber Liner
• Flex Duct

Duct Shapes:
• Round
• Rectangular
• Oval

Duct Sizing
• Round to Even Units
• Round to Odd Units

Calculations are based on friction loss equations in the ASHRAE Handbook of Fundamentals 2009.

Review Notes
-----------------------------------------
A 12x12 duct matches FPM and CFM when friction is ignored which does not happen in real life. This relationship changes based on the properties of air (see kinematic viscosity on the settings tab) and on the friction value determined via the type of duct selected. Also, for the times when you want to get friction given CFM and Duct use the "Airflow" tab, select the "ft/min" checkbox and move the slider accordingly. There are many ways to drive the open variable.

Accuracy:
-----------------------------------------
Calculations have been verified against ASHRAE fundamentals and several other references. There are more input criteria (such as duct material) than velocity, friction, and size mentioned in the review which the reviewer may not have taken into consideration. Use the Support email link for any questions or concerns.

About Powertrade
--------------------------
Powertrade is the number one developer of mobile HVAC apps with professional looking, proven apps in the hands of over 20,000 users worldwide.

Powertrade HVAC Buddy® Applications:
-------------------------
NEW!
HVAC Buddy® Load Calc - Improve accuracy when sizing equipment, demonstrate professionalism on the job, and add substance to your proposals by using our heat loss and heat gain calculation app.

HVAC Buddy® Load Calc (Apple) - Also available on iOS devices - iPhone, iPad

HVAC Buddy® - Refrigerant charging and diagnostics.

HVAC Buddy® Pressure Temperature - Traditional PT Chart with 71 Refrigerants in Metric or Imperial units

The first intelligent HVAC troubleshooting app on the market! Pocket Tech is designed to provide a quick and easy troubleshooting process for basic straight cool residential air conditioning (AC) systems. We are currently working on incorporating videos into the app for even more detailed instruction and further repair materials. Their will be electric and gas heat apps coming out in the future.

The HVAC Marketing Toolbox equips heating and air conditioning specialists with everything they need to promote and grow their business.
Effective promotion takes the right tools, and Service Roundtable has put everything you need into one convenient mobile application!

geothermal hvac systems, geothermal radiant heating, geothermal repair and service ,88hvac , green heating and cooling, geothermal radiant, radiant heating systems, radiant repair and service, radiant installation, geothermal installers, water source heat pumps, bryant heaters, bryant ac, server room cooling, residential, industrial, commercial

This simple to use but effective application is provided by the Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA). This tool allows engineers, architects, designers, and contractors to easily and accurately estimate the leakage of air from ductwork. It also allows a quick and easy way to determine the pass/fail mark for properly specified Duct Air Leakage Tests (DALT).

Users can combine multiple sections of ductwork that vary by size and shape to calculate a total allowable leakage. The application uses the method outlined in SMACNA’s HVAC Air Duct Leakage Manual, and provides suggested leakage classes from SMACNA’s latest edition of the manual. The method used is compliant with ASHRAE 90.1, IECC, IGCC Version 2, IMC and the UMC.

The Steam Tables (for HVAC and other applications) mobile app is the #1 selling app for quickly calculating saturated and superheated steam properties. Come see why 1000s of users world-wide have chosen this app to perform steam table calculations:

1. It offers the largest combination of input parameters over any competitive app, including:

For saturated steam:

Temperature and quality
Temperature and enthalpy
Temperature and specific volume
Temperature and entropy
Pressure and quality
Pressure and enthalpy
Pressure and spec. volume
Pressure and entropy

For superheated steam:

Temperature and pressure
Temperature and enthalpy
Temperature and spec. volume
Temperature and entropy
Pressure and enthalpy
Pressure and spec. volume
Pressure and entropy

2. It displays a wide range of steam property results (see the screenshots below for a sample).

3. Using the slider controls, the user can instantly view results as you update the input parameter values. Also, the user can increment/decrement by specific values for each parameter type, or can manually input exact values.

4. This app is not just a steam-table lookup app. It is powered by the actual steam-table formulas and calculations, so the user can calculate for all ranges of input values, not just those published in steam table books.

5. All values can be displayed in both English (IP) or Metric (SI) units. The user can also choose to display different units for specific parameter types such as pressure and temperature.

6. It includes the ability to email all inputs and results

The iPhone version of this application has been our best-selling app for almost 2 years. It is used world-wide by many professionals in HVAC, pharmaceuticals, chemistry, universities, and more. Now, we are offering this app to all Android users.

S&S GLOBAL HVAC SERVICES.

The Johnstone Supply Toolkit is a free HVAC mobile application that includes the following functionality:

1. Duct Sizer: This module allows you to quickly size one HVAC duct run or a range of duct sizes for a wide variety of duct materials and shapes.

2. PT Chart: This module is an electronic pressure-temperature (PT) look-up chart that allows you to specify the exact refrigerant temperature/pressure and view the corresponding pressure/temperature value. It also displays a complete list of pressure/temperature values in 1 degree increments for over 70 different refrigerants. You can adjust the elevation so proper gauge pressures are displayed. Additional functionality includes the ability to display specific refrigerant properties and email the entire PT chart list for a specific refrigerant.

3. Capillary Tube Calculator: This module allows you to perform capillary tube look-up based upon HP, condenser cooled type, and refrigerant type.

4. Store Locator: This module allows you to find the closest Johnstone Supply store to where you are currently located. You can also type in a zip code to find all Johnstone Supply stores within a specific radius.

5.AC/Gas Furnace Efficiency Savings Calculator: This module allows you to quickly calculate the energy savings for cooling or heating based upon selecting the old/new unit information and your region.

Eco-Cool HVAC™ is a Veteran Owned Business centrally located in Bel Air, Maryland providing services for Residential, Commercial & Industrial Heating, Air Conditioning, Refrigeration and Energy Management Control Systems.

Eco-Cool HVAC™ will install, service and maintain all your heating ventilation, air conditioning and refrigeration needs from forced air heating, hydronic heating systems to natural and LP gas furnaces, split air from 1-100 tons and package rooftop air conditioning systems including all makes and models of refrigerated cases, ice machines along with walk/reach-in boxes, while specializing in process and manufacturing plants, supermarkets, laboratories, restaurants and convenient stores Eco-Cool HVAC™ has all your needs covered.

Eco-Cool HVAC™, with a thorough understanding of HVAC culture, processes, and service requirements, we take your ever changing needs seriously, by increasing HVAC&R system reliability by reducing energy waste, minimizing downtime, and extending useful life with on time delivery and execution of our services and construction products.

Widely recognized as the most capable HVAC & R technicians in the industry, Eco Cool HVAC™ technicians are fully trained licensed experienced professionals averaging 15 years of experience.

Eco-Cool HVAC™ is proud to announce around the clock services without around the clock prices. You'll never have to take a day off from work, or miss meetings and appointments.

Eco-Cool HVAC™ Guarantees:

On schedule completion
Cost-effective processes
Exceed Expectations
Honesty, integrity, and value

Locally Owned and Operated
ECO-COOL HVAC™

-View a description of our services
-Sign up for alerts to remind you to change filters
-Service reminders
-Request an appointment
-Sign up for our informative newsletter to receive special members-only offers
-Go right to our social media pages from the app
-Fan Wall invites you to post pictures and comments

"Serving The Baltimore Metro Area"
Breakdowns happen, even in well-maintained equipment. There is never a convenient time for a system breakdown. Should your system develop a problem or stop operating use this mobile app to contacts us.

Johnstone Supply is the leading cooperative wholesale distributor providing brand name products, expert technical knowledge and superior customer service to the HVAC/R industry. With over 370 locally owned and operated stores nationwide, supported by five regional distribution centers, we provide the parts, supplies and equipment needed to get the job done.

The Johnstone mobile app is the source for HVAC/R products. Johnstone Supply delivers cutting edge functionality like access to real-time pricing & availability, saving products to lists for easy ordering, access to all your past orders, industry leading search functionality including search filters that allow you to quickly dive deeper into your results by selecting brands and different attributes of our products, and the ability to search within certain categories. Give it a go—there’s a lot to love!

More information
Johnstone is the leader in the HVAC/R industry and we have more data and more information than any wholesale distributor in the world. Take a look at our product catalog, with over 50,000 HVAC/R products and see for yourself. On our product detail screens you’ll find information such as brand, manufacturer part number, country of origin, over 500 unique product attributes, MSDS sheets and more.

Easier Shopping
By making it easier to find products and view enhanced product information, shopping becomes effortless! Enjoy the comfort of finding the right product and verifying the important information right from your mobile device. Enjoy real-time pricing and availability* calls, directly to your local Johnstone Supply store. No more wondering what your price is or if it’s available, we show you in real-time!

Other Great Features:
Search and browse – Choose the way you want to find products. Use the most comprehensive HVAC category browse or the best search functionality in the industry. Filter results by other categories, brands, attributes and more.

Voice-search – On the move and need to find a product? Try using our voice search. Just speak your keywords or terms into your phone and start searching right away!

Auto-login – Your time is critical. With the new Johnstone Supply app, save your store and login information for easy access so you can begin shopping in less time.

Product Lists – Save your favorite products to a list for quick viewing or ordering at a later time. Re-order these lists seamlessly, share lists with other employees at your company and much more.

Order History – Access all of your order history at your Johnstone Supply’s store online. Did you place the order by phone? It will be visible online. Picked up your order right from the store? It will be there. Placed your order online? It’s there, too. All of your orders are visible online and through your mobile device.

Order Pad – Easily enter Johnstone Supply or manufacturer part numbers directly into our order pad and add them to your cart in no time.

Stock Check – Quickly enter a Johnstone part number and see if the item is in stock at your local branch.

Trade Tools – Need to convert something to metric? Need to calculate square inches to square feet? Need to see a pressure temperature chart? In our trade tools section, you can view and do all of the above and more!

Store Locator – Quickly find a Johnstone Supply near you. Search by zip or use your GPS locator built into your phone!

Barcode Scanning - Scan barcodes directly from the app and add to your cart for checkout or save in a list for later use.

And don’t forget, real-time pricing and availability* are also available online and through your mobile device!

*At participating Johnstone Supply locations.

Instant mobile refrigerant charge calculator for HVACR applications.

The HVAC Check & Charge™ mobile app from Emerson Climate Technologies provides an on-site refrigerant charge calculator for air conditioning applications. Based on historic sliding cardboard charge calculators, this app allows contractors to easily calculate correct system refrigerant charge for R-22 or R-410A. Contractors can simply choose Subcooling, Superheat, or Airflow and enter the specified system temperatures along with the latent and sensible environmental loads. These values are then used to determine the proper system charge and whether the charge amount needs to be altered based on these conditions.
-Superheat Calculator (non TXV)
-Subcooling Calculator (TXV)
-Airflow Calculator
-For use with R-22 or R-410A

Information on this and other Emerson Climate mobile applications is available at ww.EmersonClimate.com/mobileapp.

Assists with calculating proper system refrigerant charge based on operating conditions.

Emerson Climate Technologies' PT Pro™ application provides on-the-go access to pressure and temperature conversions. Select a refrigerant and enter a temperature (in C or F) and see what a saturated pressure (in Bar or Psig) will be. You can also enter a pressure and see what the saturated temperature is for that pressure. Download the Emerson PT Pro™ to your Android device for FREE.

HVACR Fault Finder 2.0 from Emerson Climate Technologies provides on-site compressor troubleshooting for air conditioning and refrigeration applications.

This app allows contractors to easily access compressor electronics product specifications along with the ability to interface with and diagnose the system. Contractors can choose to enter the flashing “alert” code from the electronics module or use a tap feature to help identify the code. Entering the code, gains them access to troubleshooting “tips and tricks” as well as an interactive flow chart to aid in diagnosing system problems.

• Interactive troubleshooting guide
• Electronic product manuals & videos
• Application engineering guides
• Module LED descriptions
• Module alert code status
• Comfort Alert
• CoreSense Technology
• Copeland Scroll Digital Controller

Information on this and other Emerson Climate applications is available at www.EmersonClimate.com/mobileapp.

Assists With Interpreting Various Device Codes From Comfort Alert 1.0 Forward, Along with Causes/Corrections Associated With These System Problem

Keywords:A/C,Refrigeration,Compressor,Scroll,Comfort,Alert,Coresense,Copeland,emerson,digital,troubleshooting

Copeland X-Ref™3.0 Mobile Application

Instant mobile access to Emerson’s compressor cross-reference database

Copeland X-Ref™ 3.0 provides on-the-go access to Emerson’s air conditioning compressor cross-reference database to product specifications and replacement Copeland® compressors. The mobile application includes new functionality for quick and convenient access. In addition to pulling up information using the first three digits of a compressor model number, contractors can now use the new label bar code scanning feature to quickly search Emerson’s compressor database for replacement product information.

The updated Copeland X-Ref 3.0 mobile app also includes:

• Model Bar code scanning
• Includes capacitor specifications
• Performance information at two condition points
• Expanded model data base
• Enhanced mechanical and electrical information
• Auto fill model recommendations
• “Tab” style user interface

Information on this and other Emerson Climate applications is available at www.EmersonClimate.com/mobileapp.

Keywords:A/C,Refrigeration,Compressor,Scroll,Comfort,Alert,Coresense,Copeland,emerson,digital,troubleshooting,XRef,xref

Emerson Climate Technologies makes it easy to find the right part for your system. The competitive cross reference application is a user friendly tool that will cross a competitor's number over to the Emerson valve, control or system protector without worrying about having the right spaces, dashes or hyphens.

Just choose from the manufacturer list first, and then the Product Type and then select the actual competitor's Model Number and the replacement Emerson valve, control or system protector will appear.

Emerson e-Saver™ Mobile Application

Instant annual cost savings comparison for residential HVAC system replacement options

Emerson e-Saver™ provides on-the-go calculations for residential contractors analyzing forced-air HVAC system conversion options. Contractors input current system efficiency standards, along with their considered replacement option for comparison.
The e-Saver app allows for these system options to be compared to current industry minimum standards, as well as a high efficiency heat pump featuring the Copeland Scroll® Variable Speed compressor. Contractors can input up to 3 replacement options to help explain the annual cost savings to the homeowner.

• Choose your location to define run hours
• Cost savings for both heating and cooling
• Compare various fossil fuel costs
• Input your own replacement system for comparison
• Input up to 3 replacement options
• Send customized email PDF to customer
• All inputs are “sticky”
• Available for iPhone, iPad, and iPod Touch

Information on this and other Emerson Climate applications is available at www.EmersonClimate.com/mobileapp.

Keywords:e-Saver,Emerson,Copeland,A/C,Air,Refrigeration,Heatpump,Money,eSaver,Scroll,Energy,Furnace,Calculation

One touch access to Vilter's support documents.

Meet Sensi Thermostat…..a simple and sensible approach to comfort.  You can access it from anywhere – home or away – right from your smartphone or tablet.  Avoid wasteful heating and cooling when you’re not at home, but feel comfortable the moment you walk in. 

The ComfortGuard™ mobile application provides a worry free solution to protect home comfort. Setup and manage your account and establish connectivity to your home WiFi network. Access data, alerts and details about your heating and cooling equipment which is monitored by ComfortGuard™.

ComfortGuard is an innovative monitoring technology that includes the installation of ten custom sensors into your heating and cooling equipment. A central device gathers and transmits data for analysis, 24 hours a day. ComfortGuard monitoring service currently generates over 40 alerts for common problems such as efficiency loss and equipment deterioration. Some breakdowns can be predicted days in advance, allowing preventative maintenance that extends equipment life and can save money.

The ComfortGuard mobile app can only be used with professionally activated ComfortGuard hardware/account. To find an approved contractor, please submit your inquiry to support@mycomfortguard.com.

With ComfortGuard’s mobile application, you can:

- Easily set up and activate your ComfortGuard account
- Connect ComfortGuard to your WiFi network using the WiFi Setup tool
- View current system status regarding equipment, efficiency and connectivity
- Access each system associated with your account, if multiple systems exist
- View data regarding air temperature, electrical current and thermostat runs
- Directly contact your preferred HVAC service provider/contractor
- Receive and access timely alerts about equipment, efficiency and connectivity
- View alert response recommendations made by ComfortGuard
- View current outdoor air temperature
- Contact the ComfortGuard support team and view FAQs about your ComfortGuard service

Coming Soon:
- Access to system history
- System grading and comparison
- Additional alerts
and more…