This application has everything You need to do the maintenance of heating equipment. The free version includes spare parts listing, error codes, commissioning parameters...
This beta release has De Dietrich boilers in the database.
* Air or Non Condensibles In System
* Belt Drive General Information
* Commercial Heat Loss
* Compressor Runs But Does Not Pump
* Contactor Will Not Pull In
* Defrost Trips High Pressure
* Ignition Delayed or Rough Ignition
* Ice Buildup Before Defrost
* Leaking Water
* Mild Weather Heat Pump Tripping Reset
* Not All Elements Heat
* Oil Furnace Reset Tripping
* Oil Furnace Nozzle Drips
* Oil Furnace Oil Odor
* Oil Furnace Rough/Delayed Ignition
* Residential Heat Loss and Heat Gain Guide
* Roll Out Limit Tripping
* Superheat Calculation
* System Charging Check Out
* Temperature Pressure
* Tripping Circuit Breakers
* Trouble Shooting Power Vented Gas Water Heaters
* Unit Not Defrosting
* Unit Will Not Go Into Defrost
* Unit Terminates Defrost Before Coil is Free of Ice
* Water Buildup Heat Exchanger
Getting reports of the app alerting that the web page is not accessible. I've tried to repeat this behavior and cannot. I installed from the Play Store on a Samsung S4 and Tab 2 and the app works as it should without errors on my end.
Added internet permission to try and resolve loading issue. The app works fine on the above listed devices and emulators. Sorry that I don't have more testing devices available.
Use suction pressure, liquid pressure, superheat, subcooling, amperage, and humidity control to determine what problem the system has.
* AC Mode Troubleshooting
* Double Wall Connectors with Double Wall Vent
* Energy Recovery Ventilators (ERV)
* Fixed Metered Cooling
* Main Burner Orifice Sizes
* Pipe Sizing
* Single Wall Connectors with Double Wall Vent
* Temperature Rise
Displays Sensible Heat Load.
Displays Latent Heat Load.
Displays Total Cooling Load.
Displays Sensible Heat Ratio.
Displays Square Feet per Ton.
Displays Heating Load.
Upgrade to the Pro Version to save your inputs.
Not only is voltage very critical but the amp can tell us how hard a compressor is working and is a good indication of a charge
Evaporator superheat is a calculation of the amount of liquid refrigerant going into the evaporator and the heat load of an air conditioner evaporator.
Subcooling is the amount of liquid held back in the condenser. This allows the liquid to give up more heat, below saturated pressure- temperature.
Temperature difference of an evaporator coil will vary with the total heat of the air entering the evaporator and the load on the condenser. This temperature will vary from 10º F to 30º F depending on total heat of the air entering the evaporator.
When you download HVACPro you will get both the phone version and the pad version. The first 5 diagrams are the phone version the last 4 are for the pad version.
Have you ever cooperate with an architect with lots of new ideas and you need to redesign your system again and again?
Have you tired of checking the chilled water pipe sizing table again and again?
Here is a solution!
Using the knowledge referenced from ASHRAE-2009 Fundamentals, assuming black steel for chilled water pipe material, this application perform quick and simple chilled water pipe sizing for cooling load up to 40,000 tons (140,800 kW).
This application has already inputted the factory data of the total capacity of different sizes of hvac units for your reference. Of course, you can enter yours!
Imagine you are running a multi-story office building. There are 25 nos. of FCU - 400, 80 nos. of FCU - 800, 10 nos. of FCU - 1000 and a 5,000 L/s size of PAU on each of the floors. The architectural design keeps changing and you need to redesign the system again and again. Of course you also need to re-size each section of the chilled water pipes connected to your system at the same time.
You will then find using "Quick CHW Pipe Sizer - HVAC" can ease your work a lot!
This application is also an excellent tool for Residential, Hospital, Commercial, Institutional and Industrial design.
The tool is based on NIST Refrigerant Properties and is using the Antoine equations for the conversion. You will be able to see both dew and bubble point for refrigerants with glide.
How to use
On the left side of the screen a slider quickly helps you find the pressure or temperature reference. On the right side you can find the precise pressure and temperature. You can type in the precise pressure or temperature reading, and Refrigerant Slider will instantly give you the corresponding figure and move the slider for visual indication.
You can easily change pressure and temperature units within the most used metric (SI) and imperial units and switch between gage and absolute pressures as you please.
Danfoss engineers technologies that enable the world of tomorrow to do more with less. We meet the growing need for infrastructure, food supply, energy efficiency and climate-friendly solutions. Our products and services are used in areas such as refrigeration, air conditioning, heating, motor control and mobile machinery. We are also active in the field of renewable energy as well as district heating infrastructure for cities and urban communities. Our innovative engineering dates back to 1933 and today Danfoss is a world-leader, employing 22,500 employees and serving customers in more than 100 countries. We are still privately held by the founding family. Read more about us at www.danfoss.com.
The Refrigerant Slider (“the Application”) is provided on an “as is” and “as available” basis for the intended purposes as determined by Danfoss only and any use hereof is at the user’s sole risk. The Application and results and information generated thereby cannot substitute technical advice but must be verified by the user, they are not promises and should not be relied on as accurate data or analyses.
Danfoss disclaims all warranties and conditions regarding the Application, whether express, implied, or statutory, including, but not limited to, conditions of merchantability, satisfactory quality, and fitness for a particular purpose, accuracy and non-infringement of third parties’ rights. Danfoss does not warrant that the Application will meet your requirements or that the operation hereof will be uninterrupted or error-free.
To the extent not prohibited by law, in no event shall Danfoss be liable for any direct, special, indirect or consequential damages, whatsoever, including, without limitation, damage to property, damages for loss of savings or profits, or loss of data arising out of any use of the Application.
Refrigerant Slider support, please send e-mail to: email@example.com
Please visit www.danfoss.com for more information and contact details.
For more information about local support please visit http://refrigerationandairconditioning.danfoss.com/contact/
The Danfoss Heating app for installers is like having a second toolbox right in your pocket at the point of installation. It can help you install Danfoss products in a number of ways, and assist in the sales process with a wide range of marketing and support material. For example, this app helps you make on-site energy savings calculations for customers who may be considering converting to the new living by Danfoss ® thermostats or upgrading to a new floor heating system. The app makes hydronic balancing calculations and conversions quick and easy.
Some of the ways this app can help you in your daily work include:
Radiator Thermostat Support
• Ease installation with a unit calculator for living by Danfoss ® products like living eco, living connect and Danfoss Link.
• Calculate pre-setting of radiator valves by selecting radiator type and size to get correct valve pressure settings.
• Increase sales with support tools for living by Danfoss ® products, such as a return on investment calculator, product facts and sales material.
• Use installation videos in the app to assist you onsite during installation.
Floor Heating Installation Support
• Calculate costs of installing CF2+ Danfoss wireless floor heating system for your customers in both new build and renovation projects.
• Improve sales support with a product video featuring key user benefits and facts about CF2+ .
• Watch Installation videos for easy reference anywhere and anytime you need them.
Balancing Valve support
• Calculate flow and pressure measurements easily with the built-in equation tool.
• Convert pressure, flow and power and temperature between metric and non-metric systems, Celsius and Fahrenheit and various other measures easily. A handy tool for all HVAC professionals.
Additional features of the Danfoss Heating app include personalization options by specifying your “favorite tools”. You also get handy contact information for the nearest national Danfoss sales office and easy access to the latest news from Danfoss.
Danfoss is a leading company in the heating industry offering a wide range of components and solutions for generation, distribution and use of heat for comfort and energy savings in home and buildings. By continuously improving products and services, we strive to build strong relations to customers and business partners throughout the value chain. We have manufacturing facilities in more than 10 countries, and sales companies and agents in all heating markets worldwide.
REMEMBER!! The built-in microphones were aligned to human voice (300-3400Hz, 40-60dB). Therefore the maximum values are LIMITED by the hardware limitation, and very loud sound(100+ db) cannot be recognized. Moto Droid (max.100), Galaxy S3 (81dB), Galaxy Note (91dB), Galaxy S2 (98dB)...
SPL(sound pressure level) meter app uses your built-in microphone to measure noise volume in decibels(db), and shows a reference. We had calibrated many android devices with the actual sound level meter with dB(A).
See the 4-6th pictures. I had calibrated many android devices with an actual sound level meter. You can trust the result in routine-noise levels (40-70dB). But, please use it as an auxiliary tool.
* Pro version added Features :
- Sound Meter and Vibrometer are integrated
- Statistic menu with saving log data
- CSV file exporting
- Level notification
- Line-chart duration
- More models are calibrated
- No ads
* Do you want more tools?
Get [Sound Meter Pro] and [Smart Tools] package.
For more information, see the manual, Youtube video and the blog. Thank you.
** Not compatible with: Xperia(X8, X10 mini), LG(Optimus One, P350), GT-I9001, ZTE, etc
Furthermore, this is the only PT app with the ability to use imperial and metric units at the same time. And best of all… it’s free!
Refrigerants currently available:
R-11, R-113, R-114, R-115, R-116, R-12, R-123, R-124, R-125, R-1270, R-13, R-134a, R-14, R-142b, R-143a, R-152a, R-21, R-218, R-22, R-227ea, R-23, R-236fa, R-245fa, R-290 (Propane), R-32, R-401A, R-401B, R-401C, R-402A, R-402B, R-403A, R-403B, R-404A, R-405A, R-406A, R-407A, R-407B, R-407C, R-407D, R-407E, R-408A, R-409A, R-409B, R-41, R-410A, R-410B, R-411A, R-411B, R-412A, R-413A, R-414A, R-414B, R-415A, R-415B, R-416A, R-417A, R-418A, R-419A, R-420A, R-421A, R-421B, R-422A, R-422B, R-422C, R-422D, R-427A, R-500, R-502, R-507A, R-508A, R-508B, R-600a, R-717 (Ammonia / NH3), R-744 (Carbon Dioxide / CO2).
Each refrigerant is represented by a “dot” above the pressure wheel. Swipe left or right across the refrigerant bottle to switch to the refrigerant you desire. The color of the refrigerant bottle will match the official code for that refrigerant. The oil type, global warming potential, safety group, and corresponding pressure temperature wheel are also displayed. Swipe the temp –pressure wheel left or right to view the saturated pressure and temperature values.
The units are specified by using the buttons on the sides. If a unit is highlighted green, then the wheel beside it displays values in that unit. Additionally, the font color of the wheel will match the font color of the button selected. Any combination of units can be selected to view, such as Celsius and psig or Fahrenheit and bar at the same time.
Press the arrow on the left or right side to jump to either end of the wheel. The left arrow will move to the lowest temperature available and the right will move to the highest temperature.
Touch the “Refrigerants” menu button to narrow down the list of refrigerants available.
Each refrigerant that has a checkmark will be available to view from the main screen (and represented by a “dot”).
More Information Button:
Additional information can also be found for each refrigerant by touching the "Ref. Info" menu button.
Here information such as molecular mass, critical temperature, critical pressure and other valuable data can be found.
Properly sized air conditioners are critical to the comfort of your home and health of your loved ones. The sizing tables you find at the hardware store are often inadequate, forcing you to estimate your true cooling needs. Underestimation will leave your home uncomfortably warm on the hottest days. Overestimation can be dangerous, filling your home with moisture and promoting hazardous mold growth.
The Basic A/C Calculator makes air conditioner sizing fast and simple, using a mathematical algorithm derived from cooling tables and load calculation manuals to give you a rough estimate of your specific cooling needs. We have implemented a unique sun exposure/climate zone system to improve the accuracy of the estimation algorithm.
The Advanced A/C Calculator (coming soon!) puts the power of true cooling load calculation software at your fingertips. Using the same data the pros use, you can determine the exact cooling needs of your home, either as a whole or one room at a time.
If yes!! Then no doubt, HVAC Unit Converter is for you. As all we know, Unit Converter is a very important tool in our daily life, whether in job or personal life. And there are lots of Unit Converter apps in the store, which are very useful. But what makes us special, among these apps is nothing but our SIMPLE and OPTIMIZED User Interface.
Who can use HVAC Unit Converter?
•Anyone who need an User Friendly Unit Converter App
•Engineers (Especially Mechanical and Electrical Engineers)
•Salesman (Who working on Engineering Products)
•And few more people...
The App covers Units under:-
Length, Area, Mass, Velocity, Volume, Volume Flow, Temperature, Pressure & Energy.
The HVAC Unit Converter turns your Android Device into a quick and easy Conversion App. No matter where you are, whether in office, site, workshop or home...The app will be in your pocket for increasing your productivity.
LETS TAKE A LOOK AT THE APP FEATURES:-
•Supports 1300+ conversions
•Lightweight (Requires less space)
•With single input get all other results
**PRO VERSION FEATURES**
•Unlock all the conversions
•Unlock "Energy" conversions
•Unlock "Pressure" conversions
•Unlock "Volume Flow" conversions
•Improve Calculation Speed
The Copeland Mobile smartphone app provides on-the-go access to Emerson Climate Technologies Online Product Information (OPI) database for Copeland compressor specifications. This database includes both air conditioning and refrigeration products used in a variety of HVACR applications. Simply start by logging in with your current OPI username and password or register for new OPI account through the app. Next enter at least 5 characters in the compressor model nomenclature to activate an auto fill recommendation listing for model selection. Once a model and application are selected, choose from a variety of options within the home menu screen to search for information pertaining to that specific model. This app’s focus is to bring access of the OPI database directly to the HVACR service industry.
The Copeland Mobile app includes:
• WebApp – Instant updates via Online Product Information database
• Auto fill model recommendations
• Full parts, accessories and bill of materials listings
• Complete air-conditioning and refrigeration compressor model information
• Electrical wiring diagrams
• Compressor Diagnostics
• Replacement model Cross Reference
• Metric and imperial units conversion
• Links to other Mobile Apps
• “Live Chat” help function
Information on this and other Emerson Climate Technologies mobile applications is available at www.EmersonClimate.com/mobileapp.
Just choose from the manufacturer list first, and then the Product Type and then select the actual competitor's Model Number and the replacement Emerson valve, control or system protector will appear.
White-Rodgers Mobile application for HVACR contractors and distributors provides continuous field access to product replacement information for OEM, competitive and White-Rodgers products.
In addition to cross reference info, the App also provides access to product wiring diagrams, sell sheets, and installation and operating instructions for thermostats, gas valves, furnace ignition controls and cooling products in PDF format that can also be sent to an e-mail address for future viewing.
Information on this and other Emerson Climate applications is available at http://www.EmersonClimate.com/mobileapp
This app allows contractors to easily access compressor electronics product specifications along with the ability to interface with and diagnose the system. Contractors can choose to enter the flashing “alert” code from the electronics module or use a tap feature to help identify the code. Entering the code, gains them access to troubleshooting “tips and tricks” as well as an interactive flow chart to aid in diagnosing system problems.
• Interactive troubleshooting guide
• Electronic product manuals & videos
• Application engineering guides
• Module LED descriptions
• Module alert code status
• Comfort Alert
• CoreSense Technology
• Copeland Scroll Digital Controller
Information on this and other Emerson Climate applications is available at www.EmersonClimate.com/mobileapp.
Assists With Interpreting Various Device Codes From Comfort Alert 1.0 Forward, Along with Causes/Corrections Associated With These System Problem
Instant mobile access to Emerson’s compressor cross-reference database
Copeland X-Ref™ 3.0 provides on-the-go access to Emerson’s air conditioning compressor cross-reference database to product specifications and replacement Copeland® compressors. The mobile application includes new functionality for quick and convenient access. In addition to pulling up information using the first three digits of a compressor model number, contractors can now use the new label bar code scanning feature to quickly search Emerson’s compressor database for replacement product information.
The updated Copeland X-Ref 3.0 mobile app also includes:
• Model Bar code scanning
• Includes capacitor specifications
• Performance information at two condition points
• Expanded model data base
• Enhanced mechanical and electrical information
• Auto fill model recommendations
• “Tab” style user interface
Information on this and other Emerson Climate applications is available at www.EmersonClimate.com/mobileapp.
ComfortGuard is an innovative monitoring technology that includes the installation of ten custom sensors into your heating and cooling equipment. A central device gathers and transmits data for analysis, 24 hours a day. ComfortGuard monitoring service currently generates over 40 alerts for common problems such as efficiency loss and equipment deterioration. Some breakdowns can be predicted days in advance, allowing preventative maintenance that extends equipment life and can save money.
The ComfortGuard mobile app can only be used with professionally activated ComfortGuard hardware/account. To find an approved contractor, please submit your inquiry to firstname.lastname@example.org.
With ComfortGuard’s mobile application, you can:
- Easily set up and activate your ComfortGuard account
- Connect ComfortGuard to your WiFi network using the WiFi Setup tool
- View current system status regarding equipment, efficiency and connectivity
- Access each system associated with your account, if multiple systems exist
- View data regarding air temperature, electrical current and thermostat runs
- Directly contact your preferred HVAC service provider/contractor
- Receive and access timely alerts about equipment, efficiency and connectivity
- View alert response recommendations made by ComfortGuard
- View current outdoor air temperature
- Contact the ComfortGuard support team and view FAQs about your ComfortGuard service
- Access to system history
- System grading and comparison
- Additional alerts