SnapBridge

Nikon Corporation

About this app

High-quality photos taken with Nikon camera can be shared via e-mail or social media just as you would photos taken with your smart device.

Does the camera offer a WPA2-PSK/WPA3-SAE authentication/encryption option?
The camera may be unable to connect to the smart device if WPA2-PSK/WPA3-SAE is selected for authentication/encryption.
In this event, switch the camera authentication/encryption setting to WPA2-PSK-AES.
See the camera documentation for information on changing Wi-Fi connection settings.

Supported Digital Cameras as of October 2023
Z 9, Z 8, D6, Z 7II, Z 6II, Z 7, Z 6, Z 5, Z f, Z fc, Z 50, Z 30, D850, D780, D500, D7500, D5600, D3500, D3400, COOLPIX P1000, P950, A1000, A900, A300, B700, B500, B600, W300, W150, W100, KeyMission 80
D750, D7200, D7100, D5500, D5300, D3300, Df, J5, P900, S7000, S3700, AW130
The foregoing may include models not available in some regions.
Be sure to update the camera firmware to the latest version.
Use a computer to download the latest camera firmware from the Nikon Download Center. * According to your camera's model, you can download your camera's firmware via the SnapBridge app.
http://downloadcenter.nikonimglib.com/

Principal Features
- Once the camera is paired with your smart device, new photos can be downloaded automatically.
- Adjust camera settings and take photos.
- View the pictures on and download photos from the camera.
- Use the app to pair the device with up to five cameras.
- Automatically upload pictures taken with the camera to NIKON IMAGE SPACE (Note 1).
- View downloaded photos or share them via e-mail or social media.
- Add photo info or text to uploaded photos.
- Download location data to the camera (Note 2) or set the camera clock to the time reported by the smart device.
- Receive notifications of firmware updates for paired cameras.

System Requirements
Android 10.0 or later, 11, 12, 13, 14
A device with Bluetooth 4.0 or later (i.e., a device that supports Bluetooth Low Energy) is required.
There is no guarantee that this app will run on all Android devices.

Notes
- Note 1: Upload to NIKON IMAGE SPACE requires a Nikon ID.
- Note 2: The GPS function runs continuously in the background, increasing the drain on the battery. The drain on the battery can be reduced by choosing power-saving mode.
- If you are unable to download images or connect via Bluetooth or Wi-Fi after pairing, try one or more of the following solutions:
　- Turn the paired camera off and then on again.
　- Switch tabs in SnapBridge.
　- Exit and relaunch SnapBridge.
- Users can register for a Nikon ID using this app.
- Enable Bluetooth and Wi-Fi when using this app.
- Remote movie recording is not supported on some cameras.
- Movies can be downloaded by switching to Wi-Fi and selecting the files manually. Download is not available with AVI files.
- Enable NFC on the smart device before attempting to launch the app or connect via NFC.
- Remote photography and movie download are available only if the camera has Wi-Fi (some cameras only).
- The app may not perform as expected depending on your environment and network conditions.
- A smart device with a display resolution of WVGA (960 × 540 pixels) or better is required.
- The app cannot be used to view movies. Use a movie-viewing app.
- The app requires a 100 MB or more of free memory on the smart device.

Using the App
For more information, use the app "Help" option.

Ratings and reviews

I installed this app on a Samsung J7 to pair with a Z50 camera, because of the function permitting to transfer the location data (longitide, latitude, height) to the exif information of each photo. It works, but the refresh rate of the location data is very slow, it takes 2 minutes or more. And this even with the position accuracy set to "high". Or how to make a good idea useless... Do you listen, Nikon ?

First use is not intuitive, but once you figure out it is a simple to use and efficient application. Confusion arises because the connection with the camera to see the available photos is through Bluetooth, but the transfer is made through Wi-Fi. So you need to set up both connections first

I love this app! I just turn on my Bluetooth and get all my photos in real time. I also use an app for my drone, comparitvely this is such a time save!! It even sync when the camera is off. 5 stars for sure. Wish there was some similar capability for videos, a request to the developers. Maybe something where one can opt-in to sync videos? even if I have to go into the app to do it each time, I wouldn't mind.

What's new

We look forward to making still more improvements based on your feedback!
The "NX Ready" app that allowed you to use your smart device to create camera shooting settings banks and was released only in some countries and regions, is now added to this app as the "Easy Shooting Setup" feature (available with compatible cameras).
The Wi-Fi STA mode is now available as a Wi-Fi connection mode (available with compatible cameras).
Made some minor bug fixes.