Profitieren Sie von folgenden Funktionen:
- Push-Benachrichtigung für Altpapiersammlung, Grüngutabfuhr und Kehrrichtabfuhr
- Individuelle Startseite dank voreingestellter Gemeindeauswahl
- Direktanlieferungen & Sammelstellen
- Abfallarten A - Z
- Allgemeine Informationen rund um den Bereich «Entsorgung»
The best electrical transformer calculator on the market today. Fully featured, with a rich and customizable user interface. Use this calculator to calculate voltage, amps, Kva, overcurrent protection, and much more! Great for the field or for use in the office!
*** Features: ***
**Customizable user interface
**Rich and smooth graphics.
**Calculate voltage, amperage, turns, kva, and overcurrent protection on the primary and secondary side of the transformer!
**Easy to use calculations for beginners or professionals.
**Easy to use in the field for quick decisions!
**If there is any issue with your application or you would like to suggest more content, feel free to email us at email@example.com
Compliant with 2011, 2008, 2005, 2002, and 1999 NEC®
Updateable Electrical Code Calculator. An in-app purchase is currently available for NEC 2014 code update.
Great for Electrical Contractors, Designers, Engineers, Electricians, Maintenance Inspectors, Planners, Builders, and Lighting Specialists. The Electrical Calc Elite™ allows you to solve code-related problems quickly and accurately...the most common National Electric Code tables are now at your fingertips!
• Wires Sizes
• Voltage Drop on Wires
• Conduit Sizing
• Ohm's Law
• Kirchhoff's Law
• Motor Full-Load Amps
• Power Factor and Motor Efficiency
• Fuse and Breaker Sizes
• Service and Equipment Grounding Sizes
• Electrical Unit conversion
• Parallel Resistance
• Circular MILs Wire
• NEMA starter size
• NEC® references for calculations
Description of Calculations
• Convert between Amps, Watts, Volts, VA, kVA, kW, PF%, Efficiency%, and DC Resistance.
• Ohm's Law Calculations: enter any two values (ohms, volts, or amps) to solve for the third.
• Calculate required wire size per NEC® tables 310-16 and 310-17; Copper or Aluminum, 3ø or 1ø, 60°C, 75°C, 90°C insulation ratings and 100% or 125% of ampacity. Adjust wire sizes for ambient temperatures other than 30°C and for more than three wires in a raceway.
• Calculate Voltage drop: Find minimum VD wire size, maximum length for any given wire size to stay within specificed VD, drop percentage, actual number and percentage of Volts dropped.
• Conduit sizing for 12 types of conduit per NEC®: Find recommended size of conduit for combinations of #THW, #XHHW, and #THHN wires. Also calculates fill percentages, conduit cross-sectional areas, remaining areas and more.
• Find Motor Full-Load current per current NEC®: Works in 1ø or 3ø, synchronous and DC motors per NEC® 430-247, 430-248, and 430-250.
• Calculate Fuse and Breaker Sizes per NEC® 430-52.
• Parallel and derated wire sizing
• Calculate parallel resistance
• NEC Table number displays when performing wire size calculations
• Sizes overload protection per NEC® 430-32.
• Finds NEMA starter sizes per ICS 2-1988 (Tables 2-327-1 and 2-327-2).
• Calculates service and equipment grounding conductor sizes per NEC® 250-122 and 250-66.
• Convert between BTU and Kilowatts per Hour
• Circular MILs calculated for wire sizes
• Works as a standard math or electric calculator
• Quick and easy updates to future NEC® code revisions
Visit our website: http://www.cyberprodigy.com/electricalcalcelite/ for more information including our detailed user's manual.
If you are not 100% satisfied with this calculator please email us at firstname.lastname@example.org so we can make things right before posting any negative reviews. We are also open to any suggestions you may have for future enhancements to this electric calculator. Please note that any download and Google Checkout issues are directly involved with Google Play and should contact them for assistance.
Electrical Calc Elite™ is not associated with ElectriCalc® Pro and Cyberprodigy LLC is not affiliated with Calculated Industries, Inc.
Simply enter the values and get the results.
Features / Calculations:
---> Resistance Color Coding
---> Resistance Series Combination
---> Resistance Parallel Combination
---> Inductance Series Combination
---> Inductance Parallel Combination
---> Capacitance Series Combination
---> Capacitance Parallel Combination
---> Ohm's Law Current Calculation
---> Ohm's Law Voltage Calculation
---> Ohm's Law Resistance Calculation
---> Ohm's Law Power Calculation
---> Single Phase Real Power Calculation
---> Single Phase Reactive Power Calculation
---> Single Phase Apparent Power Calculation
---> Single Phase Voltage Calculation
---> Single Phase Current Calculation
---> Single Phase Power Factor Calculation
---> 3 Phase Real Power Calculation
---> 3 Phase Reactive Power Calculation
---> 3 Phase Apparent Power Calculation
---> 3 Phase Voltage Calculation
---> 3 Phase Current Calculation
---> 3 Phase Power Factor Calculation
---> DC Power Calculation
---> Line Voltage to Phase Voltage Conversion
---> Phase Voltage to Line Voltage Conversion
---> Line Current to Phase Current Conversion
---> Phase Current to Line Current Conversion
---> Delta to Star Impedance Conversion
---> Star to Delta Impedance Conversion
---> Capacitive Reactance Calculation
---> Inductive Reactance Calculation
---> Resonant Frequency Calculation
---> Resistivity Calculation
---> Peak to RMS Voltage/Current Conversion
---> RMS to Peak Voltage/Current Conversion
---> Efficiency Calculation
Please give your feedback about the app and help us improve.
En viktig del i denna dimensionering är att utlösningsvillkoret uppfylls!
Denna applikation är tillämplig för att kontrollera så att utlösningsvillkoret om 0,4 sek uppfylls med hänsyn till maximal kabellängd.
Applikationen förutsätter normala spänning och frekvensförhållanden samt en drifttemperatur om 55 grader. Samt ett TNS eller TNC uppbyggt elnät
Uträkningar, värden och information är hämtat från:
- SS 424 14 04
- SS 424 14 06
- SEK Handbok 421 utgåva 4
The app is split into four parts: the Electrical Safety Tests, a Multimeter Guide, an Ohm's Law Calculator and an Ohm's Law Guide.
★★★ Electrical Safety Tests ★★★
The app will show you how to carry out all of the tests from start to finish to help you make sure the boiler is completely safe. The tests should be completed after an installation (before switching on the appliance) or before carrying out any work on an existing boiler. Each test contains easy to understand images to make it much simpler to follow. Many electrical faults can be identified from the tests and the Fault Isolation page should help you to find the cause.
There are six parts, these are:
• Before Starting
• Earth Continuity Test
• Short Circuit Test
• Resistance to Earth Test
• Polarity Test
• Fault Isolation
We asked someone who had never used a multimeter to use the app and they were able to carry out the tests with ease!
★★★ Multimeter Guide ★★★
To help you to get a better understanding of how to use your multimeter, this app includes a multimeter guide. It consists of the following parts:
• Multimeter types
• Multimeter settings (those settings needed when working on boilers)
• SI Prefixes (to help you understand the multimeter results)
• Know your multimeter (so you will know what to look for on your own multimeter)
★★★ Ohm's Law Calculator ★★★
Our very popular Ohm's Law Calculator is included in this app. It's extremely easy to use; enter two known values, press the 'Calculate' button and the other two values will be entered instantly. If more calculations are required, each single entry box can be cleared using the corresponding 'X' button or press 'Reset All' to clear all four boxes.
★★★ Ohm's Law Guide ★★★
If you're a beginner with electrics the Ohm's Law Guide will help to give you a better understanding of the calculations. The first two pages will explain Ohm's and Watt's Laws and the other four pages contain every possible formula for conversions between voltage, current, resistance and power.
A complete Ohm's Law reference guide you can take with you - wherever you go!
***Mr Combi Training would love your feedback on this app and suggestions for other apps that Heating Engineers would find useful. Please contact us at email@example.com
Currently supports for reading and editing MS Word files( .doc , .docx , .rtf , .xml), MS Excel files( .xls , .xlsx), MS PowerPoint files (.pptx), Text file, office XML files and CSV files.
This is a great product that you are about to discover.
No additional license is needed, no Ads, no Hidden fees, no Up sells, ~everything you need is included~, and most of all our support team is always at your service (we reply fast).
- Word, Text Files and RTF files : Create, View and Edit any word file ( .doc, .docx, .rtf, .txt, .xml).
Export to PDF file(new), Spell Check, Search, Easy Selection, all buttons are dynamic, Decorate the selected text, Write Emails with this great editor and send them with your preferred Email account, add Pictures, in-app ready icons(like in the picture), Header/Footer, links, and many more features, real page size(option for viewing and zooming too), easy and fun to use, user friendly, Like the Word editor on your computer !
- Excel : Advanced excel editor, View, Edit and Save Excel files ( .xls, .xlsx), lets you create complex workbooks, easy and fast styling, includes presets that you create, all functions available for fast entry, spell check, all text styling and all cells styling, Zooming, easy to use, user friendly.
- PowerPoint : Unique PowerPoint editor, that lets you be very creative on the go and even at home, you might find it very useful for office presentations especially after you made it with this editor, many tools and features to let you achieve your goals, this editor is a must and it's included !
- CSV : View, Edit and Save CSV files, Sum Columns, Search and Edit, Sort descending/acceding according to any column, Save(save guard- to avoid lost of data).
Many records as you might need to load (100 records per page, many pages as your file is).
Add CSV, add one CSV file to another, letting you combine as many CSV files as you need into one file, easy to use, user friendly.
- Printing and emailing : You can print your documents, compose beautiful emails or attach your documents to an email.
- Tutorial section (NEW)- tutorial videos showing all the features available in Android Office editors, each editor has its own tutorial, button by button and task that might not be obvious at first glance.
According to your request, here are the permissions explanation :
- Internet access : used for Dropbox, Google license check and emailing.
- User Account info : used for registering Android Office (registration is not necessary to all users, only for those who failed to register in front of Google Play)
More information at our Web Site, feel free to contact our support team -
You can also watch the promo video.
Note : PDF editor is Coming next, you can now create PDF Files using the word editor.
* We are welcome your advice/suggestion, and we'll consider each and every advice carefully, our vision is to make Android Office as your favorite editor, simply because it's the best, please share your thoughts with us, let us know what can we do to improve this great editor - to make it even better, you can mail to FB@SiblingOnline.com , your suggestions.
**We recommend on ControlMyPc to transfer files from and to your computer, from anywhere in the world.
keywords : word , office , android office , Microsoft office , doc , docx , excel , spreadsheets , rtf , xml , txt , documents , csv , ms word , office suite , xls , xlsx, pptx ,ppt , powerpoint , power point , presentation , slideshow , slide show .
Please Note: This is the last month that Android Office will run for $5.99, get your copy now to get it for the lowest price, all updates are free and it's all included.
The most fully features electrical motor calculation application on the market! This application does it all! from simple nameplate calculations to single and multiple motor conductor calculations. This calculator also includes OCPD and overload sizing! With a rich and simple to navigate user interface that is customizable! Great for field work or use in the office! Follows NEC National Electrical Code.
*** Features: ***
** Rich and easy to use interface.
** Customize the background and text colors to your liking!
** Over ten electrical motor calculations included!
** Derating for motor conductors!
** Kva, RPM, Horsepower, Poles, Overload, OCPD, conductors, and much more!
**Great for field work or office use!
** You name it, this calculator has it!
**If there is any issue with your application or you would like to suggest more content, feel free to email us at firstname.lastname@example.org
With this application you can check the battery charging electrical current of your Samsung Galaxy devices.
*Note: please check the compatible devices list below*
The application displays three values that will tell you if the device's battery is charging correctly:
- Reference: The theoretical charging current, i.e., the rate at which the battery *should* be charging (usually 999 on AC and 466 on USB).
- Maximum: The maximum charging current. In other others, the phone will not get more current to charge the battery than the value displayed here. This is the value that matters most.
- Average: Usually is the same as Maximum (at least after some seconds).
Most stock chargers should charge your device's battery at about 1000mA. If you think that your device's battery could be charging slowly, check it! If this application displays a value much lower that 1000mA, the battery is charging at a lower current than desired.
This application also comes with a simple launcher widget and a DashClock extension so that you can quickly check the charging current!
- International Samsung Galaxy S III (GT-I9300 and GT-I9305).
- South Korean Samsung Galaxy S III (SHV-E210K/L/S).
- International Samsung Galaxy Note II (GT-N7105).
- South Korean Samsung Galaxy Note II (SHV-E250S)
- Verizon Samsung Galaxy Note II (SCH-i605).
- Most Galaxy S4 models.
It may also work on other devices, but such is not guaranteed.
The application *may* not work on the following devices:
- Samsung Galaxy S3 Mini.
- Sprint S3 and Note 2.
- Verizon S3 and Note 2.
- Any device older than the Samsung Galaxy S3 (Galaxy Note 1, Galaxy S2, ...).
TAGS: samsung galaxy s3 note2 s4 i9300 battery charging charger current power plug current_max ma AC electric dashclock
Electrician App contains the most important formulas in the field of electrical engineering. Easy to use, available in 3 languages: English, German and Russian.
Features of Electrician App:
Calculation of up to twenty resistors (parallel).
Calculation of current, charge and time.
Calculation of work, time and power.
Calculation of line resistance.
Calculation of current, voltage, power and resistance.
Calculating the voltage drop on the line.
Calculating the maximum length of the conductor.
Calculation of the conductor cross-section.
Calculation of real, reactive, apparent power at AC.
Calculation of real, reactive, apparent power for three-phase.
Calculation of primary voltage, secondary voltage, primary windings, secondary windings of a transformer.
Calculating the cross section and diameter.
Calculation of the current density.
Calculation of cos φ.
Calculation of sin φ.
For the accuracy of the calculation, we assume no liability.
Forget complicated formulas and calculation methods, specify a value-known and Electrician App returns the result. Several updates and new formulas more languages are planned in the near future.
Electrician App is optimized and improved by us and as for we depend on your help.
Please add comments, write your opinions, suggestions or report any errors.
Thanks in advance!
1. This tool is typically used in electric power engineering calculations.
2. The tool provides a quick estimate to size capacitor banks for power factor improvement.
3. Instructions to use the app and typical entries are illustrated in the help view.
1. Easy to navigate Lists
2. Advanced input validation
3. Unit measurement input
4. Results to 2 decimal places
5. Auto-fill for poles
6. Formula viewing
1. Active kW
2. Rated kW
3. Apparent Power(KVA)
4. Line Amps
5. Rated Torque
6. Rated Slip(%)
7. Synchronous Speed(r/min)
8. Starting Time(s)
This app is simple to use and smart enough to recalculate circuit values when user edits any input data. More tools will be added to the list soon.
If you have any questions or difficulty in using the app please contact email@example.com
More from developer
Input your Amps value, input your Watts value and press calculate and your result will be displayed, quick, easy and simple!
A very useful app which can be used by any one. Free Electrical app for Android phones and tablets.
Calculate either to or from any of the following:
+ Power Factor
+ Single phase
+ Three Phase
+ Calculate watts to amps,
+ Calculate amps to watts,
+ Calculate three phase kw,
+ Calculate single phase watts,
+ Calculate how many amps in watts,
+ Convert three phase kw to Amps,
+ Calculate three phase power factor,
+ Calculate volts from amps and watts,
+ Many more combinations of Watts, Volts, Amps, kW, Power Factor, Single and Three Phase Calculations.
A must have electrical app for professional electricians and electrical engineers looking to carry out fast and accreate calculations out in the field or in the design office.
Must have electrical apps for the professional electrician.
We only design apps for the Electrical Industry.
Enter the voltage (Uo to earth), enter the Zs value, select the phase and the PFC Circuit Fault Current kA value will be displayed, simple and easy!
A useful electrical tool for electricans, electrical engineers & electrical testers when testing and inspecting or for designing electrical circuits from the PFC / PSC
value and for selecting the correct MCB or fuse breaking capacity type.
Calculate the Prospective Fault Current from the Zs or Ze value.
Also check out our other electrical apps
Feel free to contact us with any enquires
ELECTRICAL TOOLS APP INCLUDES:
► Watts Calculator
► Amps Calculator
► Volts Calculator
► kW Calculator
► Power Factor (cos)Calculator
► kVA Calculator
► Max Zs Values - 100% values Calculator
► Max Zs Values - Temperature Adjusted Calculator
► Manufacturer specific Zs Values. 60947-2 / 3871 Type 4
► Zs values for RCD's in TT Earthing Systems Calculator
► Calculate la
► REC Ze Values
► Fault Current - Single Phase Calculator
► Fault current - Three Phase Calculator
► Pvc/pvc Cable Wire Sizes = Cable Sizes, Volt Drop, Zs, Tabulated Currents, Volts Drop, r1+r2
► More Coming Soon!
ELECTRICAL REFERENCE APP INCLUDES CHARTS & TABLES:
► (SWA) Steel Wire Armour Gland Pack Sizes Chart
► (SWA) Steel Wire Armour Cleat Sizes Chart
► (SWA) Steel Wire Copper Equivalent Sizes for use as (cpc) circuit protective conductors.
► (SPD) Surge Protection Charts
► (SPD) Surge Protection Protective Conductor Sizes
► (SPD) Surge Protection Impulse Withstand Voltages
► (SPD) Surge Protection Power Frequency Stress Voltage
► Maximum Permitted RCD Trip Times for RCD's and Time Delay RCD's
► More coming soon!
Electrcal tools and reference app is an electrical app for electricians and electrical enginners, makes life easyer!
Feel free to contact us if you would like any electrical charts or electrical calculators added to this electrical app in a free update.
© Pro Certs Software Ltd 2012 All Rights Reserved.
Once you have this information you can phone or email Power Capacitors Ltd (from within the application) who can advise and supply you with the most cost effective solution to help cut your electrical costs and reduce your carbon emissions.
As our company has grown, so have the needs of our customers and that’s why our capabilities include the distribution of motor and power electronics capacitors. Our fully qualified engineers also provide servicing, maintenance and installation of any type of power factor correction equipment.
Power Factor Correction:
Depending on your needs, we can specify, design, manufacture and install both part-built and complete systems. We provide plain and de-tuned solutions for any AC power supply up to 1000 Volts RMS.
Power Electronics Capacitors:
We can supply a full range of components and, when appropriate, advise on the best choice for a particular requirement. For more specialist requirements, we can design and supply custom components.
We can install, commission, service and repair any brand of power factor correction equipment. We offer load, power factor, harmonics and power quality testing with full technical reporting and recommendations.
TRANSWAVE Phase Converters:
Standard designs to 30hp including static and rotary converters for single or multi-motor applications, Bespoke designs - for example dual circuit or 480V input - are available on request.
Power Capacitors Ltd are also the sole manufacturer of TRANSWAVE ® Converters for the operation of 3-phase equipment where only a single phase electricity supply is available. Visit our website for further details http://www.powercapacitors.co.uk/Transwave.html
You can use this app to:
Calculate required kVAr correction
Calculate Power Factor
Reduce Carbon Emissions
Reduce Electric Costs
Help Lower Energy Costs
App deveolped by Pro Certs Software Ltd
Calculates maximum permitted Zs values to BS 7671 17th edition for BS and BS EN devices, MCB's, RCBO's, Fuses and Manufacturer Specific Device values, specific values for RCD's in TT earthing systems, LV, REC Ze values....100% and 80% temperature adjusted values.
+ BS EN Devices Zs values Calculator
+ Manufacturer specific device Zs values
+ REC Ze values
+ Calculate Zs values from known la ratings
+ Max Zs values for RCD's for TT earthing systems
+ 55 Volts single phase Zs values calculator
+ 63.5 Volts three phase Zs values calculator
+ RCD/RCBO Zs values calculator
+ BS fuses Zs values
+ 100% values
+ Temperature adjusted values
+ BS7671 17th edition Zs values
+ Zs values for 230v
A professional max Zs values and earth fault loop impedance values calculator app for Android.
A handy app to have for checking and verifying measured Zs values when completing electrical certificates and testing certificates.
For use on tablets and phones.
Calculate cable sizes by selecting from the pre set options, fast and easy.
Cable Size Calculator Domestic calculates circuit cable sizes for PVC/PVC Flat twin and earth cables for all common domestic installation methods.
Great for designing new circuits or for checking existing circuits for compliances.
+ PVC/PVC Flat twin & earth cable sizes
+ Calculates Maximum Permitted Zs
+ Checks the Maximum Permitted Zs value with the calculated Zs value.
+ Calculates r1 + r2
+ Calculates Volt Drop
+ Checks the calculated Volt Drop against the Maximum permitted Volt Drop
+ Calculates the tabulated current (It)
Also Applies any relevant correction factors depending on your selections i.e. Thermal Insulation (Ci), BS 3036 Fuses (Cc), Grouping (Cg), Ambient Temperature (Ci) automatically.
A perfect electrical calculator app for the domestic installer or professional electrician, Chief, Foreman, electrical engineer, estimater, designer...
A handy app for checking & verifying measured values or calculating a value from the other two known values.
+ Calculate R1+R2
+ Calculate Zs
+ Calculate Ze
+ Check you measured R1+R2 readings
+ Check your measured Zs readings
A useful app for the electrician and electrical testing engineer.
The Adiabatic Equation automatically calculates I squared, k values, PEFC Earth Fault Currents, t (time) and the minimum protective conductor size by selecting the options from the drop down lists. Fast, easy and simple.
This Electrical App Also Features:
+ Main Earthing Conductor Size Calculator
+ Main Bonding Conductor Size Calculator
+ Supplementary Equipotential Bonding Conductor Size Calculator
+ Circuit Protective Conductor cpc Size Calculator
+ Adiabatic Equation s= sqrt of (I2 x t) /k
Also calculates k values for:
+ Steel Conduit
+ Steel Trunking
+ Single Cables
+ SWA Steel Wire Armour / Sheath
+ Multicore cables
Also calculates electrical PEFC Earth Fault Currents.
A very handy electrical calculator for the electrician needing to check or calculate main earth bonding / grounding and circuit protective conductor sizes ( cpc ) by using the specified calculator which is based on the regulations tables or by using the Adiabatic Equation Calculator.
The Electrician's Blog App is packed full of useful info for electricians and is updated directly from the blog itself.
Fast reference to everything that matters to an electrician:
• Tips and Wiring Diagrams
• 100s of Articles
• Info about The Regs
• Free Jobs listings for Electricians and Trainees
• Product news and reviews
• Forum discussion
Your own comments are always welcome. After all that's what a blog is all about!
Can't find what your looking for? Then use the search box to trawl the huge database of information.
This blog is run and managed by Steve Kirby at http://www.electriciansblog.co.uk/
App developed by Pro Certs Software
Enter your values and the app will carry out the calculation for you which helps to eliminate calculation errors and save time.