SensorLoom: Field Meters
In-app purchases
Everyone
info
0+
Downloads
About this app
WHAT YOU GET FREE
Use all 15 tools free: 14 read your phone sensors live and Dewly is a manual dew point calculator. Each keeps its own save caps, such as 5 readings in Trulev and 2 rig profiles in SwayGauge.
IN-APP PURCHASES
Every purchase below is a one-time unlock. There is no subscription.
SensorLoom All Access ($6.99)
Unlocks all 15 tools at once: unlimited saved jobs, sites, spots and sessions, every export and report, and the locked modes such as the high-sensitivity detector, FFT spectrum, Storm Watch and DLI tracking.
You can still unlock tools individually; All Access simply adds whatever you do not already own.
SonaDose Module ($0.99)
Unlocks your full saved session history with CSV export, per device calibration presets, the live FFT spectrum with peak frequency readout, and OSHA and NIOSH dose tracking.
Trulev Module ($0.99)
Unlocks unlimited saved readings, unlimited jobs and points with roll up and verify history, CSV and HTML reports, and the sensor suite with calibration profiles, beep and fall mode.
Dewly Module ($0.99)
Unlocks unlimited saved spaces with notes and presets, the complete reading list beyond the newest 5, multi surface comparison with a combined report, and CSV and text risk report sharing.
BaroCrest Module ($0.99)
Unlocks unlimited tracks, sites and log entries, searchable tagged entries, CSV and printable HTML report export, and Storm Watch with saved 3 hour and 24 hour trends and tunable fall alarms.
FerroSweep Module ($0.99)
Unlocks the high-sensitivity detector mode with adjustable threshold, axis choice, peak hold and audio cues, stud edge center and width bracketing, unlimited saved scans, and CSV and image export.
SpinTacho Module ($0.99)
Unlocks turntable target and cents mode, precision averaging with saved zero bias, unlimited readings with search, trend and CSV, and unlimited recorded runs with report export.
PlumbCast Module ($0.99)
Unlocks the height by tangent offset workspace, unlimited jobs and captures with search and duplicate, surface zero and device flat calibration, and CSV and report card export.
GaussTrace Module ($0.99)
Unlocks X, Y and Z components, peak and min hold, range and unit switching, device calibration, unlimited maps, runs and experiments, and CSV, JSON and PDF export.
ParaSquare Module ($0.99)
Unlocks unlimited saved angles, projects and corners with search, miter and bevel, fraction inch, averaging and freeze, plus CSV, PDF, HTML and text angle sheets and cut lists.
SwayGauge Module ($0.99)
Unlocks the audible and haptic drift alarm, oscillation analysis with amplitude, period, frequency and RMS, unlimited rigs and sessions, and CSV, HTML and PDF reports.
FlatField Module ($0.99)
Unlocks the full 9 point survey with relief map and twist analysis, per point shim guidance, unlimited searchable checks with notes and tags, datum drift history, and exports.
GradePly Module ($0.99)
Unlocks the run, fall and slope solver with drainage presets and end elevations, ramp checks, freeze, calibration, unlimited searchable jobs and legs, and CSV and PDF reports.
LuxThread Module ($0.99)
Unlocks unlimited spots, readings, surveys and points with search and duplicate, the multi day trend, saved plant DLI tracking that continues across tabs, and CSV and PDF reports.
TiltShim Module ($0.99)
Unlocks the live multi foot shim plan, pass or fail tolerance and target slope tuning with haptics, unlimited searchable setups, re level history, and CSV, PDF and text exports.
VibeGauge Module ($0.99)
Unlocks the live FFT spectrum with movable cursor and window choice, 1x, 2x and 3x order markers against entered RPM, unlimited assets with baselines and trends, and exports.
PRIVACY AND OFFLINE USE
No account is required. Your saved work stays on your device and is never uploaded to us. The app works offline.
There are no ads anywhere in this app on Android or iOS.
bee2.io LLC - more apps at https://bee2.io
Use all 15 tools free: 14 read your phone sensors live and Dewly is a manual dew point calculator. Each keeps its own save caps, such as 5 readings in Trulev and 2 rig profiles in SwayGauge.
IN-APP PURCHASES
Every purchase below is a one-time unlock. There is no subscription.
SensorLoom All Access ($6.99)
Unlocks all 15 tools at once: unlimited saved jobs, sites, spots and sessions, every export and report, and the locked modes such as the high-sensitivity detector, FFT spectrum, Storm Watch and DLI tracking.
You can still unlock tools individually; All Access simply adds whatever you do not already own.
SonaDose Module ($0.99)
Unlocks your full saved session history with CSV export, per device calibration presets, the live FFT spectrum with peak frequency readout, and OSHA and NIOSH dose tracking.
Trulev Module ($0.99)
Unlocks unlimited saved readings, unlimited jobs and points with roll up and verify history, CSV and HTML reports, and the sensor suite with calibration profiles, beep and fall mode.
Dewly Module ($0.99)
Unlocks unlimited saved spaces with notes and presets, the complete reading list beyond the newest 5, multi surface comparison with a combined report, and CSV and text risk report sharing.
BaroCrest Module ($0.99)
Unlocks unlimited tracks, sites and log entries, searchable tagged entries, CSV and printable HTML report export, and Storm Watch with saved 3 hour and 24 hour trends and tunable fall alarms.
FerroSweep Module ($0.99)
Unlocks the high-sensitivity detector mode with adjustable threshold, axis choice, peak hold and audio cues, stud edge center and width bracketing, unlimited saved scans, and CSV and image export.
SpinTacho Module ($0.99)
Unlocks turntable target and cents mode, precision averaging with saved zero bias, unlimited readings with search, trend and CSV, and unlimited recorded runs with report export.
PlumbCast Module ($0.99)
Unlocks the height by tangent offset workspace, unlimited jobs and captures with search and duplicate, surface zero and device flat calibration, and CSV and report card export.
GaussTrace Module ($0.99)
Unlocks X, Y and Z components, peak and min hold, range and unit switching, device calibration, unlimited maps, runs and experiments, and CSV, JSON and PDF export.
ParaSquare Module ($0.99)
Unlocks unlimited saved angles, projects and corners with search, miter and bevel, fraction inch, averaging and freeze, plus CSV, PDF, HTML and text angle sheets and cut lists.
SwayGauge Module ($0.99)
Unlocks the audible and haptic drift alarm, oscillation analysis with amplitude, period, frequency and RMS, unlimited rigs and sessions, and CSV, HTML and PDF reports.
FlatField Module ($0.99)
Unlocks the full 9 point survey with relief map and twist analysis, per point shim guidance, unlimited searchable checks with notes and tags, datum drift history, and exports.
GradePly Module ($0.99)
Unlocks the run, fall and slope solver with drainage presets and end elevations, ramp checks, freeze, calibration, unlimited searchable jobs and legs, and CSV and PDF reports.
LuxThread Module ($0.99)
Unlocks unlimited spots, readings, surveys and points with search and duplicate, the multi day trend, saved plant DLI tracking that continues across tabs, and CSV and PDF reports.
TiltShim Module ($0.99)
Unlocks the live multi foot shim plan, pass or fail tolerance and target slope tuning with haptics, unlimited searchable setups, re level history, and CSV, PDF and text exports.
VibeGauge Module ($0.99)
Unlocks the live FFT spectrum with movable cursor and window choice, 1x, 2x and 3x order markers against entered RPM, unlimited assets with baselines and trends, and exports.
PRIVACY AND OFFLINE USE
No account is required. Your saved work stays on your device and is never uploaded to us. The app works offline.
There are no ads anywhere in this app on Android or iOS.
bee2.io LLC - more apps at https://bee2.io
Turn your phone into field meters: sound, level, light, RPM, magnetic & more.
Updated on
Safety starts with understanding how developers collect and share your data. Data privacy and security practices may vary based on your use, region, and age. The developer provided this information and may update it over time.
No data shared with third parties
Learn more about how developers declare sharing
No data collected
Learn more about how developers declare collection
What’s new
Removed all advertising and ad-related tracking components. The app now shows no ads.
Retired the separate Remove Ads purchase because it is no longer needed. Existing one-time feature unlocks and restored purchases continue to work normally.
Updated privacy information, store copy, and general stability.
Retired the separate Remove Ads purchase because it is no longer needed. Existing one-time feature unlocks and restored purchases continue to work normally.
Updated privacy information, store copy, and general stability.
App support
phone
Phone number
+19784392462
About the developer
BEE2.IO LLC
info@bee2.io
82 Wendell Ave Ste 100
Pittsfield, MA 01201-7066
United States
+1 978-439-2462
