ScanM5X Data Logger

scantwin

About this app

Version 2.42 is in principle compatible with Android 13.

ScanM5X is a tool OBD for the ECU Marelli M59, M5A of Italian, Ducati, Guzzi motorcycles after 2001. It need an ELM327 Bluetooth or Wifi interface and connection kit to Tyco 3pins and need a motorcycle 12V power.

Reminder: the contact will be ON, less than 10sec before launching the app.
ScanM5X stores No. Id of each ELM-BT/Wifi already connected once and automatically connects

ScanM5X displays the values of the sensors in real time.
- displays sensors
- logs data in file
- displays and erase DTC
- runs standard Active Tests
- Reset Service lamp
- Reset TPS
- Change the trimmer (for ECU without lambda Sensor)
- displays status (side stand, Run/Stop)

ScanM5X is a diagnostic and tuning tool, they should not be used during the trip.

Need:
Fiat 3pin Alfa Lancia to 16 Pin Diagnostic Cable obd2
and
ELM327 OBDII V1.4 Bluetooth Diagnostic Interface OBD2 or ELM327 VGate Bluetooth OBD-II OBD2 or ELM327 Wifi.
Caution : it doesnt work with some ELM like Super Mini V2.1.
Recommended ELM327: BlueScan II from Lonelec.com

Thank you Frank, H@ns and Paul for their help and patience.
Link Bluetooth to Innovate sensors (@TM) conceived and designed by Implusive_Duc, Senior Member of Ducati.ms
- added explicit permissions for write file access to memory (datalog, route, DTC, setting)
- added explicit permissions for GPS location (speed, route)


See my site for some help
http://christian.giupponi.free.fr/Android/SCANM5X.HTM
and
voir http://christian.giupponi.free.fr/Android/SCANM5X_HC06.HTM

REQUIRED AUTHORIZATIONS:
- Fine Location:
* to retrieve speed in Monitor and Dashboard
* this authorization is requested because the BT would allow to connect an external GPS
- Bluetooth:
* connection of ELM-BT and HC06 or ELM-BLE
- Wifi:
* connection of ELM-Wifi
- Network:
* download Help file
- prevent device from sleeping:
* for use while driving

Ratings and reviews

Ive got a Ducati 999s and getting the proper Ducati Diags is unrealistic. I got hold of JPDiag and the cables and was rather unimpressed after my mate said its dodgy and could damage the ECU and it took me loads of attempts to get it working. He advised to download ScanM5x and get the ELM327 adapter. Anyway I got the adaptor and put the app on my phone. Absolutely unbelievable !!! What an incredible app and it does exactly what it says on the box. All the tests work perfectly, I reset the service icon, ran the dashboard etc etc. Absolutely love it. Ducati people, forget JPDiag use this instead as it is brilliant.If you have problems connecting just check settings and make sure its either Bluetooth or wireless. Yes its that simple !!!!

This is great. So handy to see what the bike is actually doing and what the sensors read when troubleshooting. Thanks so much for maintaining it. Using on my 2011 848 Evo with an Amazon-sourced 4 pin-ODBII adapter and a random BT ELM dongle I had lying around.

This is what i wanted to ask:if the connection to a wi-fi ELM adaptor is possible....I wanted to write an email but could not find a email adress...please put one in the help orcreate a "contact category" in the app menu.Thank you.

What’s new

- Android 14
- Conversion of the original lambda O2 into AFR value
For display in the Dashboard, Unit of lambda = AFR, set the coefficients A=1 and B=0.
See the table on :
https://forum.arduino.cc/t/lecture-de-la-tension-dune-sonde-lambda-et-annonce/522003