Partometer3D is camera app for area, perimeter, length and distance, height and width, ratio, circle parameters (radius, diameter), angles measurements. It can be used as a camera ruler or tape measure for accurate measurements on pictures and photos. This app allows user to make measurements in any defined direction and plane in 3D space.
The distances and object size can also be measured by Partometer App, but Partometer3D has no constrains on the camera position relative to the measured object.
The measurement plane / object plane don't have to be parallel to the camera plane.
It expands number of situations where application can be used. For example, big objects now can be measured by taking a picture from the side, objects and distances that are difficult to reach can be measured as well.
Partometer3D has the same application area as Partometer, but gives you more flexibility and power. Angle Mode / Protractor / Goniometer can be used for roof angle measurements. This data can be used in SolarMeter app for solar energy calculations.
It has following important and distinctive features:
- measure in any selected plane in 3D space
- Length, Angle, Area, Circle Modes
- add/delete any number of measurement/ruler lines
- values assigned to each ruler line
- measure objects in different directions
- save and share you measurement
- find object ratios, if you do not need absolute measurements
- compare object parts to each other
- use custom and predefined reference objects
- automatic reference object fine alignment using image processing
- reset reference object alignment by LONG TOUCH on auto alignment button
Partometer3D uses a phone/tablet camera and any available object with known size as a reference to perform measurement. To define the measurement plane a rectangular object (sheet of paper, credit card, custom object) is used. Image processing is used for automatic fine alignment with the reference object.
The App shows measurement results in different units: meters, millimeters, centimeters, feet, inches based on user settings. It also calculate dimensions of the object in relative units with respect to the reference object (ROL).
There is an option to make a picture and work with the still image instead of live camera view. Picture Load feature is also implemented to work with any picture from your photo gallery. Zoom View feature helps to align object boundaries accurately.
Partomter3D can be very useful if you need to measure bigger distances on the plane, where the simple ruler or tape is difficult to apply. All you need to do in this case is to place a rectangular object (credit card or sheet of paper) on the measurement plane,
make sure that the object of interest fits into the camera view and make measurements.
Thank you for your support.