joaomgcd

This unlocks the full version of AutoVoice, and allows you to have commands with more than 4 characters.

AutoVoice is an advanced Tasker voice control system that leverages the power of having a bluetooth headset in your ear. Find more about it here: http://goo.gl/lOjRp

Control your Android device with your voice, now even via your Bluetooth headset! You can even redirect all audio to your Bluetooth headset and also react to your Bluetooth headset button and do whatever action you want with it in Tasker.

Get started here: joaoapps.com/autovoice/
Check the FAQ here: http://joaoapps.com/autovoice/faq/

This version is limited to commands with 4 characters. If you want to unlock complete commands, you can do it in-app or buy the separate unlock key here: http://goo.gl/g8cKH

****************************************
(WARNING: YOU MUST HAVE TASKER INSTALLED FOR THIS APP TO BE OF ANY USE: AutoVoice is only usable as a plugin in Tasker. Please don't rate it negatively because of this.)

If you're planning to use it, please check if your Bluetooth headset works before buying the full version!

If your bluetooth headset fails to be recognized, please try disconnecting it from the phone, rebooting and reconnecting. This procedure is known to help in these situations.

Please contact me if anything is wrong and I'll respond to you promptly and try to fix it as soon as I can. Thank you.
*****************************************

AutoVoice is a Tasker plugin that gives you full control of your Android device with your voice or your bluetooth headset.

Another great advantage of AutoVoice is the ease of setup. AutoVoice uses regular Tasker conditions to react to your voice, so it's as easy as setting the command you want to react to and choosing the Task to perform, all from withing Tasker! Expect to take no more than 1 minute setting up a cool new voice command!

Watch this video by dkc to see what kind of awsome stuff is possible with AutoVoice: http://goo.gl/hqWcJ

These are all the conditions/actions that are available in Tasker:
- "AutoVoice Recognize" action (starts voice recognition with or without headset)
- "AutoVoice Control Bluetooth" action (lets you redirect all audio from your phone to the bluetooth device at any time; please note that the Bluetooth button stops responding if this is active)
- "AutoVoice Set Command Id" action (allows you to define the next command in a chain of commands)
- "AutoVoice Recognized" condition (lets you react to your voice commands and chain several commands together)
- "AutoVoice Recognition Failed" condition (lets you react when nothing was recognized in a voice prompt)
- "AutoVoice BT Pressed" condition (lets you react to a button press on your Bluetooth headset that is not necessarily associated with voice recognition... can do anything you want with it!)
- "AutoVoice BT Pressed (2)" same as above, but for secondary button function (on some headsets it's a long button press, on others it's a short button press)

After you do a voice command you can react to it in the "AutoVoice Recognized" condition in Tasker (works very much the same way as in AutoRemote, another joaomgcd app).
You can use the words you spoke in the corresponding entry task. Learn how to use these variables here: http://joaoapps.com/autovoice/variables/
- %avcomm (the whole command you spoke)
- %avcommnofilter (the whole command minus the the text you put as the command filter in the condition. Could be used for instance to get the part that you want in a "play song" command, e.g. filter:"play song", command: "play song XXX", %avcommnofilter will be "XXX")
- %avword1, %avword2, %avword3 etc are all the words in the command you spoke.

AutoVoice is also much more convenient than the regular "Get Voice" action in Tasker, because you can easily chain commands together with an advanced command system that lets you avoid all the if-else-endif conditions you have to use with the Tasker built-in "Get Voice" action. Also, because of the built-in variables, you'll get to the words you're looking for much faster.

The command chain system works like show in this example video: http://goo.gl/wuLIJ

Remotely control your phone and PC!

With AutoRemote you have full control of your phone, from wherever you are by sending push notifications to your phone and reacting to them in Tasker or AutoRemote standalone apps!

Please don't leave negative feedback without contacting me first. I'll always do my best to help you, and I can't do that if I can't contact you.

Fully automate your life with the following apps:
- AutoRemote for Android (the app you're looking at now): also allows for remote URL opening and sharing with no need to have Tasker installed. Also allows for remote notifications that show up on your Android notifications bar.
- Tasker for Android using AutoRemote as a plugin (http://goo.gl/RMig2)
- AutoRemote standalone apps (RSS Feed: http://goo.gl/ogfZj; Page: http://goo.gl/3mFgz)
- Zapier website: add hundreds of Conditions and Actions to Tasker in one go, including checking RSS feeds, sending emails without user interaction, checking your dropbox folders or sending google talk messages (http://goo.gl/JpthX)
- AutoRemote for Windows: send and receive messages on your PC (http://goo.gl/82YJp)
- AutoRemote for Linux: send any linux command and react to its response (http://goo.gl/VMkgw)
- AutoRemote for Google Chrome: send links, pages or selections to AutoRemote (http://goo.gl/fclFN)
- AutoRemote for EventGhost: send and receive messages to remote control your PC (http://goo.gl/Uqk7o ;video tutorial:http://goo.gl/ARIJ8)
- AutoRemote direct URL messaging: send messages from anywhere with a simple URL (http://goo.gl/Snak5)
- AutoRemote on iOS: Send commands from iOS shortcuts (http://goo.gl/WtjsL)

Here's a must see video for anyone starting out with AutoRemote: http://goo.gl/RYCTh

This is how it works:
- Send an AutoRemote message from a web browser, your desktop, EventGhost, Chrome, Zapier, or any place where you can call an URL
- Setup an AutoRemote profile in Tasker to react to the message
- Do whatever you like with that message!

Check out the Quickstart guide (http://goo.gl/OhZsg)

Also, check out an awesome AutoRemote guide here: http://goo.gl/aNfuA

With device-to-device or PC-to-device messaging, you can control one of your devices from another device or even from your PC! And with a Tasker plugin to send messages via AutoRemote, you can have full bi-directional messaging!
Imagine requesting your phone's location and have it displayed in a map on your tablet or PC.

You can also directly Share links or text to another device via the regular Share menu in Android! Imagine you are checking out a YouTube video on your phone, and directly open it on your bigger Tablet screen for better viewing!

With AutoRemote you have advanced matching options and a flexible command system (see how it works here: http://goo.gl/PRQas). It works just like with joaomgcd's AutoBarcode app!

See many use case examples here, including AutoRemote uses for saving lives and keeping in touch with your loved ones: http://goo.gl/3mFgz

Possible uses for AutoRemote(all these uses are fully customizable. You are free to use any other words or commands):

Can't remember where you put your phone? Create a lost-my-phone" command:
You could send a "Where are you?" message to your phone, and have Tasker respond with a repetitive "I'm here! I'm here!".

Let your wife send you a spoken shopping list when you get off work:
You can use AutoRemote with other Tasker conditions, such as the Date and Time conditions. Create a "shop=:=" command and combine it with a 5PM condition. Then, share your personal AutoRemote URL with your wife and have her send stuff she needs you to buy like "shop=:=carrots and ice cream". Then, at 5PM your phone could say that list out loud: "You need to go shopping! You need to buy carrots and ice cream"

Find my Phone:
Send a "location" command and have your phone respond with its location via AutoRemote to another Android device, or simply SMS to any phone

And many many more! Your imagination is the limit!

Unlock AutoLocation permanently.

Get AutoLocation here: http://goo.gl/riXLe
You can also get a free Trial by downloading AutoLocation and unlocking the free trial in-app.

Unlock the full version of AutoLaunch with this unlock key.

Get AutoLaunch here: https://play.google.com/store/apps/details?id=com.joaomgcd.autoapps

Check out AutoLaunch's home page for more info: http://joaoapps.com/autolaunch

Run shortcuts from Tasker or Locale.

(WARNING: YOU MUST HAVE TASKER OR LOCALE INSTALLED FOR THIS APP TO BE OF ANY USE: AutoShortcut will not show up on your homescreen or app drawer. It is only usable as a plugin in Tasker or Locale.)

AutoShortcut is a plugin for Tasker or Locale that allows you to run any of your installed apps' shortcuts.

Usage examples:
- Play Winamp playlist automatically when you connect your headphones at home
- Open specific Google Reader feed when you wake up in the morning
- Open specific note in Evernote when you're in a team meeting
- By exporting a standalone app in Tasker which contains an AutoShortcut task, you can use your own shortcuts in apps or lockscreens that don't support them, like the stock lockscreen in the Galaxy S3 for example. See a tutorial here: http://goo.gl/9Ug6R

Note: only shortcuts that have been developed using standard Android shortcut creating protocol will show up and/or work. If a shortcut doesn't work, contact that app's vendor.

- Permission to call phone is needed, so you can add a "Call person directly" shortcut in Tasker or Locale

- Permission for Internet is needed ONLY for splashscreen showing my other apps. Get the Pro version if you want this to go away and to support the developer.

Run shortcuts from Tasker or Locale.

(WARNING: YOU MUST HAVE TASKER OR LOCALE INSTALLED FOR THIS APP TO BE OF ANY USE: AutoShortcut will not show up on your homescreen or app drawer. It is only usable as a plugin in Tasker or Locale.)

AutoShortcut is a plugin for Tasker or Locale that allows you to run any of your installed apps' shortcuts.

Usage examples:
- Play Winamp playlist automatically when you connect your headphones at home
- Open specific Google Reader feed when you wake up in the morning
- Open specific note in Evernote when you're in a team meeting
 - By exporting a standalone app in Tasker which contains an AutoShortcut task, you can use your own shortcuts in apps or lockscreens that don't support them, like the stock lockscreen in the Galaxy S3 for example. See a tutorial here: http://goo.gl/9Ug6R

Note: only shortcuts that have been developed using standard Android shortcut creating protocol will show up and/or work. If a shortcut doesn't work, contact that app's vendor.

- Permission to call phone is needed, so you can add a "Call person directly" shortcut in Tasker or Locale

Launch apps in Tasker dynamically with AutoLaunch. Also, query your apps and act on them!

You can use Tasker variables to do this, so this makes it possible to do stuff like you see in the video where you can see apps being launched by voice commands.

You can also query the apps you have on your device and do what you want with the results. You can, for instance, create a custom app launcher menu like you can see in the video.

Please read the AutoLaunch FAQ if you're having any trouble launching apps: http://joaoapps.com/autolaunch/faq/

Lite version is restricted to interacting with 20 of your apps. You can get the full version by unlocking it with an in-app purchase or by getting the unlock key here: https://play.google.com/store/apps/details?id=com.joaomgcd.autolaunch.unlock

Before leaving any negative feedback, please send me an email or put a post on the joaomgcd Google+ Community so I can try and help you first. It's much easier for me to help you directly than through Google Play reviews. I might miss the reviews, because there's nothing alterting me to new ones, so it will be much faster to contact me directly.

Check out AutoLaunch's home page for more info: http://joaoapps.com/autolaunch

This unlocks the full version of AutoNotification available here: https://play.google.com/store/apps/details?id=com.joaomgcd.autonotification

Unlock key for AutoContacts: https://play.google.com/store/apps/details?id=com.joaomgcd.autocontacts

Advanced interactive Notifications in Tasker with JellyBean support.

(WARNING: YOU MUST HAVE TASKER INSTALLED FOR THIS APP TO BE OF ANY USE: AutoNotification is only usable as a plugin in Tasker. Please don't rate it negatively because of this.)

Please don't leave negative feedback without contacting me first. I'll always do my best to help you, and I can't do that if I can't contact you.

With AutoNotification you can create notifications in Tasker with the following characteristics:
- Title
- Text (Can be a really long text in Jelly Bean)
- Ticker Text
- Small Lower Right String
- Small Lower Right Number (may be rendered a bit bigger than the string on some devices)
- SubText (Secondary notification text)
- Message on receive (you can react to messages in an AutoNotification profile)
- Message on Touch (you can react to messages in an AutoNotification profile)
- Message on Dismiss
- Url to open on Touch
- Icon (URL of a custom icon; local or web URL)
- Id (Notifications with equal Ids will overlap eachother; useful for situations where you'd only want the latest status update, e.g. your battery level)
- Priority (controls how high on your notification list it appears)
- Make Persistent
- Dismiss on Touch (true or false)
- Sound
- LED Color
- LED On (time the LED is on)
- LED Off (time the LED is off)
- Vibration (vibration pattern on receive; generate one here: http://goo.gl/svMXG)
- Picture (big picture URL for Jelly Bean notifications; local or web URL)
- Max Progress (max value of a progress bar)
- Progress of the progress bar
- Indeterminate Progress bar (true or false)
- Share Button
- Button 1, 2 and 3 (custom buttons that you can react to in an AutoNotification profile)
- Label 1, 2 and 3 (labels for the buttons)
- Icon 1, 2 and 3 (icons for the buttons)

Lite version restrictions:
 - Title and Text are limited to 5 characters
 - LED color will always be red with 100ms on and off time
 - Vibration not supported
 - Custom sounds not supported
 - Messages you can react to in an AutoNotification profile are limited to 2 characters

Get the full version in-app.

Like mentioned above, you can react to notifications in Tasker using the joaomgcd command system also available in the AutoRemote and AutoBarcode apps. Check out how it works here: http://goo.gl/PRQas

Demo of an interactive notification here: http://www.youtube.com/watch?v=Br050i8uGiY
Demo from www.pocketables.com here: http://www.youtube.com/watch?v=8nboZy3kBBY
Tips for using lists with AutoNotification: http://goo.gl/CmrRI

Basically, to create an interactive notification that copies the word "test" to the phone's clipboard, follow these steps:
- Add an AutoNotification notification action in Tasker (new Task -> Plugins -> AutoNotification)
- Set any of the fields above that you can react to (like Message on Touch) to "copy=:=test" (without the quotes)
- Create a new profile and add an AutoNotification condition to it (New Profile -> Condition -> Plugins -> AutoNotification)
- In the message filter write "copy=:=". This will make this profile activate with every message that has the "copy=:=" expression in it.
- In the corresponding Entry task add a Copy to Clipboard action and set the text to %ancomm. %ancomm is one of the variables available in the Entry Task of an AutoNotification profile and is any text to the right of =:=
- Done. Now "test" is on your phone's clipboard

In AutoNotification, the default variable names for its messages are:
- %anmessage for all of the message
- %anpar1, %anpar2, %anpar3, etc for every word on the left of =:=
- %ancomm for all text to the right of =:=

With this command system you can do anything you want in Tasker from your custom notification.

Most of the functionality of this app is also present in AutoRemote (http://goo.gl/1nPde), so get that if you're interested in controling Tasker remotely and much much more.

Control your device with your movement! React to Geofences and Activities in Tasker!

AutoLocation is a Tasker plugin that lets you know when you're walking, in a vehicle, cycling, standing still or tilting the device, or when you're in a certain geographical area or spot and react to that information any way you like!

Geofencing is a new powerful location algorithm provided by Google that lets you track your location with higher accuracy and lower power consumption than ever before.

The new Android Fuse Location Provider uses all your device's location sensors to give you the best location updates possible. No longer rely on just "Net" or "GPS" like in Tasker. You can even not use any battery at all and only get location updates when other apps request them!

****************************************
(WARNING: YOU MUST HAVE TASKER INSTALLED FOR THIS APP TO BE OF ANY USE: AutoLocation is only usable as a plugin in Tasker. Please don't rate it negatively because of this.)

To use AutoLocation you must unlock the app. You have 2 options:
- Try app for free for 7 days, available in-app
- Buy AutoLocation unlock key: http://goo.gl/ENxuc

If you don't unlock the app in either of these ways, the AutoLocation Tasker conditions will never be matched.

Please contact me by email if anything is wrong and I'll respond to you promptly and try to fix it as soon as I can. Thank you.
*****************************************

Activity Monitor:
- Change your settings or do any Tasker action based on your current activity
- Activities include walking, in a vehicle, cycling, standing still or tilting the device
- Advanced matching options like level of confidence of an activity and ignoring certain activities while doing others (like ignoring phone tilting while walking)
- You have access to these Tasker variables in the Entry Task (and only in the Entry Task) of an "AutoLocation Activities" condition:
- %alactivity (IN_VEHICLE = 0; ON_BICYCLE = 1;ON_FOOT = 2; STILL = 3; UNKNOWN = 4; TILTING = 5;)
- %alactivitydesc (description for the above code)
- %alactivityconf (confidence level that the detected activity is correct; from 0 to 100)
- You can activate or deactivate the Activity Monitor at any time with a Tasker plugin action

Geofence Monitor:
- Change your settings in Tasker based on your physical location
- Please leave Wifi on when using Geofences. Users have reported that these don't work well when Wifi is off.
- Geofencing is a new powerful algorithm provided by Google that is more battery efficient and more accurate than Tasker's built in location condition. Take a look at this video presentaion to see how it compares to the regular tracking methods Tasker uses: http://goo.gl/Pf1bj
- Add as many as 100 Geofences to always keep track of your whereabouts
- If you find you are being reported to enter and exit a Geofence several times in a row try making the Geofence circle a bit bigger
- Long-touch the map while adding a Geofence to switch between views (normal, sattelite or hybrid)

Fuse Location Monitor:
- Get your location using high-accuracy, better battery life or using no battery at all!
- Variables available on the Location condition's entry task:
- %alaccuracy
- %albearing
- %alspeed
- %altime
- %alaltitude
- %allatitude
- %allongitude
- %alprovider

IMPORTANT: You can enable/disable/toggle these monitors from inside Tasker itself with the "AutoLocation Activities" and "AutoLocation Geofences" plugin actions

Use cases:
- If you like to jog on saturdays, start music player when the walking activity is detected on a saturday morning
- Start navigation app if the "in vehicle" activity is detected right after you left the "Home" geofence
- Make phone silent if you're in the "Work" geofence and are in the "Still" activity
- Send an AutoRemote Notification to your wife when you enter the "Market" geofence, asking her if she needs anything
- And many many more!Your limit is your imagination!

This unlocks the full version of AutoShare available here: https://play.google.com/store/apps/details?id=com.joaomgcd.autoshare

Add Tasker support to any app with AutoShare! Do anything on an ever growing number of apps with AutoShare intents available here:http://goo.gl/r1ibqy. You can also share to AutoShare from the regular Android share menu and get the share info into Tasker.

Simply use the regular Android share menu and choose AutoShare from the list and the Subject, Text or files will be sent to Tasker where you can do what you want with them! On the corresponding Enter Task you have several variables available:

- %assender (contains the sender app's package name; the app that shared to AutoShare)
- %assubject (contains the subject of the share)
- %astext (contains the text of the share)
- %asfile1, %asfile2, %asfile3, etc (contains path to files shared; can be accessed in tasker as an array named %asfile)

With the AutoShare command feature you can easily tell Tasker what you want to do with what you are sharing. For instance, use the "copy" command in a profile and in the corresponding task, copy %astext to the clipboard. Then share with the AutoShare Command and choose "copy" from the dropdown list, and whatever you shared will be available on your device's clipboard

You can also create an Android Share menu from within Tasker with AutoShare, with the Subject, Text and Images of your choosing.

- Intercept shares to other apps and replicate them in Tasker, where you can tweak them at your will or use Tasker variables to make them dynamic.. Watch this video to fully understand it: http://youtu.be/4QPi56Brqsg

Example uses (all these commands are free-form; you are free to come up with any command you'd like):

- Share to Clipboard: copy any share-able text to your phone's clipboard instantly

-Share to multiple social networks simultaneously: Share to AutoShare with a "social" command, in Tasker popup a window to input your personal comment then with AutoRemote (http://goo.gl/uJSce) send that to Zapier which in turn instantly posts it on Facebook, Twitter, etc! :)

- Add urls to your read-at-home list: Share urls with a "readathome" command and open those urls when you get home on your phone or even on your computer with AutoRemote (http://goo.gl/uJSce)

- Alter text any way you like before sharing it to another service: share anything with an "alter" command, and trim text, or alter it in any way you like and reshare it with another app via AutoShare

- Add Sharing sending and receiving abilities to your StandAlone apps

- Add items to your todo list: share any text with a "todo" command and add it to a list in Tasker

- Share when at home: Want to remember to share that special photo when you get home? Simply set a Wifi-connected profile connected to an AutoShare Task and when you get home you'll be reminded to share the photo instantly

Note: Lite version is limited to only receiving and sharing the Text field. You can purchase the full version in-app.

Unlocker for AutoPebble.

Get the app here: https://play.google.com/store/apps/details?id=com.joaomgcd.autopebble

Watch this video to see what AutoPebble can do: http://goo.gl/6HCPxB
Please take a look at the FAQ to see if any of your questions are already answered: http://goo.gl/uOMlJO

Automate your Life from your wrist!

AutoPebble is a Tasker plugin that allows you to completely customize your watch!

AutoPebble is to the Pebble what Tasker is to your Android device. With all its versatility it allows anyone to build mini-apps on their Pebble that can replace many other apps. It's just like bringing Tasker into your Pebble.

As featured on Android Police (http://goo.gl/UbFgS9), Android Authority (http://goo.gl/HzNFeO) and Android Headlnes (http://goo.gl/3fAA4L)!
Watch this video to see what AutoPebble can do: http://goo.gl/6HCPxB
Please take a look at the FAQ to see if any of your questions are already answered: http://goo.gl/uOMlJO

Get the AutoPebble unlocker here: http://goo.gl/DU0BJA . Free version is limited to 5 char commands.

AutoPebble requires the Pebble 2.0 firmware and Android app. Get it here: https://developer.getpebble.com/2/getting-started/

Get the watch app here: http://goo.gl/FchwlM

Learn how to get started with AutoPebble here: http://goo.gl/w9FXil
Learn about the command system used in AutoPebble here: http://goo.gl/3FVCyQ

DYNAMIC HOME SCREENS:
When you open the app on your Pebble, the screen that shows up can depend on the situation you're in. For example, you can have a different home screen for when you're at home, when you're at work or you can even have a Late Night home screen.
LISTS
With list screens you can create customized lists, where you set the header and lines. Each line can have a different Label and Action, so you can for example list your favourite music apps when you insert your headphones or connect to the bluetooth radio in your car, or list your favourite TV shows and play them on your TV.
NOTIFICATIONS
You can redirect your notifications to your Pebble with the help of AutoNotification, or create your own notifications, where each button can do a different action.
QUICK SCREENS
You can also set quick static screens. This type of screen always shows a Title and 3 options and you can set different actions for each button. With this you can easily use your pebble as a remote control.
TEXT SCREENS
You can set a screen with a title and a very long text, so that you can for example read a news article on your Pebble or have some notes show up on it when you need them.
TWIST/SHAKE/TAP ACTION
you can do any action with a twist of your wrist. This lets you dismiss a notification without ever having to touch your Pebble! Or you can switch between commands and channel list mode on a remote control.

SHORT/LONG/DOUBLE CLICK
Every button on your Pebble can have different modes. For example, you can make it so that a long click on a notification will show its full text. Or you can make a short click toggle a light, but a long click check the light status. Or you can make a double click on a button restart the show you're watching instead of its normal function.
VIBRATION
You can set custom vibration patterns for when a screen shows up or when ever you please as long as the AutoPebble app is open on your watch. Generate the vibration pattern on your PC and it will be reproduced faithfully on your Pebble.
PEBBLE LIGHT
You can turn on and off your pebble light whenever you please. You could make it always be on at night, and always be off during the day for example.
WINDOW MANAGEMENT
You can control window creation and dismissal on your Pebble. For example, by using window IDs I can make my Remote Control and Channel screens always overlap eachother, and when I press back I go directly to my Home screen instead of just going back to the previous screen.
DO NOT DISTURB
You can make it so that a screen is never dismissed. This lets you have some notes for your class on your pebble for example, and be sure that you won't receive notifications as long as that screen is up.
MUSIC APP INTEGRATION
You can make the built-in Pebble Music app control AutoPebble as well. For example, you can launch the AutoPebble watch app with the Play button.

Check-in to foursquare automatically by simply being near or connected to Wifi networks, or with Tasker or Locale. Top rated check-in automator on Android!

Wifi is available just about everywhere nowadays. FsIntents will use that to automatically check you in. It's also a Tasker and Locale plugin or a 1-touch simple-as-it-gets shortcut solution for all your automatic check-in needs. You can also check-in using the 2-step process, Live Folders, QR-Codes and Voice commands. Read about all these methods below. Don't forget to change FsIntents' settings to suit your needs!

If you don't have Tasker or Locale installed, you can check-in automatically using just your existing Wifi connections!

Create shortcuts on your home screen to enable 1-touch check-ins at your favorite venues, or create Tasker or Locale tasks so you can fully automate your check-ins!

***Now when you buy FsIntents, get AutoBarcode for free! Install AutoBarcodeLite and it will automatically upgrade to the full version! Check AutoBCL Settings in your app drawer to confirm you are using the full version.***

*Tasker tasks
(WARNING: TASKER IS AN ANDROID APP THAT AUTOMATES TASKS ON YOUR PHONE. THIS FEATURE ONLY WORKS WITH TASKER INSTALLED)
Create a Tasker task using the FsIntents plugin for Tasker and automatically check-in whenever and wherever you like! You can, for instance, automatically check-in at your work place when you connect to your work's wifi connection. Or you can check-in at your favorite restaurant if you stay in the restaurant's vicinity for more than 10 minutes. The only limit is your imagination.

*Locale
(WARNING: LOCALE IS AN ANDROID APP THAT AUTOMATES TASKS ON YOUR PHONE. THIS FEATURE ONLY WORKS WITH LOCALE INSTALLED)
FsIntents is now also a Locale plugin! You can check-in to foursquare with Locale and costumize your check-in needs to your heart's content!

*Wifi check-ins
(THIS IS A STANDALONE FEATURE WITH NO NEED FOR 3RD PARTY APPS)
FsIntents can now check-in with the help of your existing wifi networks! Simply assign a Foursquare venue to a Wifi network and you will be checked in whenever you connect or are near to that network! Be it your office, your home or your favorite mall, you can automatically check-in automatically wherever there is Wifi available!

*Shortcuts:
Create a shortcut on your homescreen by choosing one of your favorite venues.All you need to do now to check-in is touch the shortcut. You will receive a notification when your check-in is done.

*2Step Check-ins
The Official Foursquare app substitute for check-ing in, 2Step Check-ins! Create an FsIntents 2Step shortcut on your homescreen, and check-in with only 2 steps:
1 - Touch shortcut
2 - Touch Venue
You're done! Never open your foursquare app for check-ing in again!

*QR Check-ins
Visit http://goo.gl/5DuMe on your PC to create QR tags that you can then use to automatically check-in with FsIntents. Print out these tags and physically place them at your favorite venues so you and everyone else can check-in easier and faster! Use homescreen shortcut to scan the QR tags.

*Voice Check-ins
Configure your favorite venues in FsIntents with voice commands, and check-in using your voice. Use homescreen shortcut to issue voice commands to FsIntents.

Please remember that Developers can't respond to Market comments. If you have problems using FsIntents, just drop me an email.

A special thanks to Tim Korhumel for all the new icons! Thanks Tim!

Add FsIntents to your circles in Google+ so you can keep up with all the latest updates: https://plus.google.com/104685916695754873503/posts

Also, you can follow FsIntents on Facebook:
https://www.facebook.com/FsIntents

Remotely control your phone and PC!

With AutoRemote you have full control of your phone, from wherever you are by sending push notifications to your phone and reacting to them in Tasker or AutoRemote standalone apps!

Please don't leave negative feedback without contacting me first. I'll always do my best to help you, and I can't do that if I can't contact you.

Lite version limitations: Messages are limited to 2 characters. Also, you're missing out on everything shown in this video: http://goo.gl/0d0nHA

Fully automate your life with the following apps:
- AutoRemote for Android (the app you're looking at now): also allows for remote URL opening and sharing with no need to have Tasker installed. Also allows for remote notifications that show up on your Android notifications bar.
- Tasker for Android using AutoRemote as a plugin (http://goo.gl/RMig2)
- AutoRemote standalone apps (RSS Feed: http://goo.gl/ogfZj; Page: http://goo.gl/3mFgz)
- Zapier website: add hundreds of Conditions and Actions to Tasker in one go, including checking RSS feeds, sending emails without user interaction, checking your dropbox folders or sending google talk messages (http://goo.gl/JpthX)
- AutoRemote for Windows: send and receive messages on your PC (http://goo.gl/82YJp)
- AutoRemote for Linux: send any linux command and react to its response (http://goo.gl/VMkgw)
- AutoRemote for Google Chrome: send links, pages or selections to AutoRemote (http://goo.gl/fclFN)
- AutoRemote for EventGhost: send and receive messages to remote control your PC (http://goo.gl/Uqk7o;video tutorial:http://goo.gl/ARIJ8)
- AutoRemote direct URL messaging: send messages from anywhere with a simple URL (http://goo.gl/Snak5)
- AutoRemote on iOS: Send commands from iOS shortcuts (http://goo.gl/WtjsL)

Here's a must see page for anyone starting out with AutoRemote: http://joaoapps.com/autoremote

To read more about AutoRemote check the full version description here: http://goo.gl/NwgaKj

Automate your phone with QR codes!

AutoBarcode is a Tasker plugin that allows you to completely automate your phone with QR Codes. Simply scan a code (generate one here http://goo.gl/JBLg7 ) and react to it in Tasker any way you like!

(WARNING: TASKER IS AN ANDROID APP THAT AUTOMATES TASKS ON YOUR PHONE. THIS FEATURE ONLY WORKS WITH TASKER INSTALLED)
Note: AutoBarcode uses a Barcode Scanner installed on your phone. If no compatible scanner is found, it will open Android Market so you can download "Barcode Scanner" ( https://market.android.com/details?id=com.google.zxing.client.android ) for free.

Very simple example: open Tasker and create a new profile with an AutoBarcode condition (State->plugin->AutoBarcode). To start out, check the Event checkbox and leave everything else blank. Then associate it with a task that simply flashes "Hello World!". After this run the AutoBarcode app and scan any QR Code with it. This should make  "Hello World!" flash on your screen!

With AutoBarcode you have advanced matching options and even a flexible command system (see how it works here: http://goo.gl/PRQas) that allows you to truly personalize your experience.

Here are some examples on how you can use AutoBarcode:

- AutoBarcode is the Quickest way to let Tasker know you're at a specific place if there's no wifi or you don't want or can't use wifi (work, car, specific bedroom in your home). For example, have a QR code ready on your car's dashboard. When you get there, just scan the code, and Tasker can start playing your favorite songs with the volume turned way up, while opening google maps to show you the way.

- Create QR codes that enable or disable specific settings on your phone: turn off sound, enable blutooth, enable wifi when you get to work, etc..

- Use with AutoShortcut ( https://market.android.com/details?id=com.joaomgcd.autoshortcut ) and Winamp ( https://market.android.com/details?id=com.nullsoft.winamp ) to have fast access to your favorite playlists: have specific playlists at work, in your living room, in your bedroom, in your kid's bedrooms, in your car, etc

- Suprise your friends with your talking phone: generate QR codes and follow the instructions here: http://goo.gl/JBLg7

- Create a Scavenger hunt for your kids by spreading out QR codes with hints and clues on how to find the next one, by playing songs, videos, opening popups or webpages in tasker (or anything else you want!)

- Propose marriage in a cool and geeky way

By combining the power of QR Codes and Tasker you can do this and much, much more.

Follow our Google+ page to always get the latest updates on AutoBarcode: https://plus.google.com/102846121180673741272

If anything goes wrong or if you have any suggestions, please remember that Developers can't respond to Market comments. If you have problems using AutoBarcode, just drop me an email.

Search for your contacts by name or nickname and get all their info in Tasker so you can call them, text them, get their birthday, their address or whatever else you'd like.

See how to get started with AutoContacts here: http://joaoapps.com/autocontacts/

Also, check out this video to learn the basics on AutoContacts: http://www.youtube.com/watch?v=q7GJqsgzy6I

With AutoContacts you can get lots of info on your contacts.

Start by using the Tasker action "Plugin->AutoContacts" and writing a name in the "Name or Nickname" field. Then you can use any of the AutoContacts variables to call, email, sms, or anything else you want to do with the info. You could navigate to a contact's home address, or open his website on a browser. You could even create a notification when his birthday is near. It's up to you what you do with your contact's info!

These are some of the variables you get when you query your contacts:

%acname - Contact Name
%acnickname - Contact Nickname
%acnumber - Contact Phone Number
%acnumbertype - Contact Phone Number Type (Work, Home, etc)
%acemail - Contact Email Address
%acemailtype - Contact Email Address Type (Home Work, etc)
%acaddress - Contact Physical Address
%acevent - Contact Birthday, Anniversary or other
%aceventtype - Type of the event in %acevent

Total time spans can be useful to find out the total number. For instance, you could write "Anniversary was 542 days ago"
%acdayssinceevent - Total Number of days since the event first happened
%acmonthssinceevent - Total Number of months since the event first happened
%acyearssinceevent - Total Number of years since the event first happened

Cummulative time spans can be useful if you want to write stuff like "Birthday happened 12 years, 2 months and 15 days ago".
%acdayssinceeventc - Cummulative Number of days since the event first happened
%acmonthssinceeventc - Cummulative Number of months since the event first happened
%acyearssinceeventc - Cummulative Number of years since the event first happened

%acdaystoevent - Total Number of days to the next time this event happens
%acmonthstoevent - Total Number of months to the next time this event happens
%acyearstoevent - Total Number of years to the next time this event happens
%acdaystoeventc - Cummulative Number of days to the next time this event happens
%acmonthstoeventc - Cummulative Number of months to the next time this event happens
%acyearstoeventc - Cummulative Number of years to the next time this event happens
%aceventday - Day of the month this event happens
%aceventmonth - Month this event happens
%aceventyear - Year this event happens
%aceventweekday - Day of the week this event happens
%aceventweekdayname - Name of the day of the week this event happens
%aceventweekdayshortname - Short Name of the day of the week this event happens

Free version is limited to 20 contacts. If you want to unlock the full version, you can do so with an in-app purchase or by getting the unlock key here:: https://play.google.com/store/apps/details?id=com.joaomgcd.autocontacts.unlock

Know when the next system alarm is going to be and act on it in Tasker, with AutoAlarm!

You could make a pre-alarm task like the very cool one Andreas Ødegård describes in his SLEEP MODE here: http://goo.gl/rRw0I. He uses it to create his own personal sunrise by making his room light up gradually before the actual alarm fires.

(WARNING: YOU MUST HAVE TASKER INSTALLED FOR THIS APP TO BE OF ANY USE: AutoAlarm will not show up on your homescreen or app drawer. It is only usable as a plugin in Tasker)

To get started check out the video. You'll see how to quickly setup AutoAlarm. The video shows how you can see the amount of hours remaining till the next alarm, but you can use any other Tasker action with the alarm info. Here are the variables you can use with AutoAlarm:

Absolute values:
"%day"
"%month"
"%year"
"%hour"
"%minute"
"%second"

Times to next alarm:
"%milis"
"%seconds"
"%minutes"
"%hours"

Cumulative times to next alarm:
"%secondsc"
"%minutesc"
"%hoursc"
"%daysc"

String variables:
"%raw" (will have the time as reported by the system, i.e. "Sun 14:00")

Also, very important, if there's an error while retrieving the next alarm it will be in the "%error" variable.

Note: there are several users reporting that the app doesn't work with their language. Please make sure you're using the default Android alarm app to get the most compatibility.

Drop me an email if something goes wrong and I'll always try to fix it!

Check-in to foursquare automatically by simply being near or connected to Wifi networks, or with Tasker or Locale. Top rated check-in automator on Android!

Wifi is available just about everywhere nowadays. FsIntents will use that to automatically check you in. It's also a Tasker and Locale plugin or a 1-touch simple-as-it-gets shortcut solution for all your automatic check-in needs. You can also check-in using the 2-step process, Live Folders, QR-Codes and Voice commands. Read about all these methods below. Don't forget to change FsIntents' settings to suit your needs!

If you don't have Tasker or Locale installed, you can check-in automatically using just your existing Wifi connections!

Create shortcuts on your home screen to enable 1-touch check-ins at your favorite venues, or create Tasker or Locale tasks so you can fully automate your check-ins!

***Now when you buy FsIntents, get AutoBarcode for free! Install AutoBarcodeLite and it will automatically upgrade to the full version! Check AutoBCL Settings in your app drawer to confirm you are using the full version.***

*Tasker tasks
(WARNING: TASKER IS AN ANDROID APP THAT AUTOMATES TASKS ON YOUR PHONE. THIS FEATURE ONLY WORKS WITH TASKER INSTALLED)
Create a Tasker task using the FsIntents plugin for Tasker and automatically check-in whenever and wherever you like! You can, for instance, automatically check-in at your work place when you connect to your work's wifi connection. Or you can check-in at your favorite restaurant if you stay in the restaurant's vicinity for more than 10 minutes. The only limit is your imagination.

*Locale
(WARNING: LOCALE IS AN ANDROID APP THAT AUTOMATES TASKS ON YOUR PHONE. THIS FEATURE ONLY WORKS WITH LOCALE INSTALLED)
FsIntents is now also a Locale plugin! You can check-in to foursquare with Locale and costumize your check-in needs to your heart's content!

*Wifi check-ins
(THIS IS A STANDALONE FEATURE WITH NO NEED FOR 3RD PARTY APPS)
FsIntents can now check-in with the help of your existing wifi networks! Simply assign a Foursquare venue to a Wifi network and you will be checked in whenever you connect or are near to that network! Be it your office, your home or your favorite mall, you can automatically check-in automatically wherever there is Wifi available!

*Shortcuts:
Create a shortcut on your homescreen by choosing one of your favorite venues.All you need to do now to check-in is touch the shortcut. You will receive a notification when your check-in is done.

*2Step Check-ins
The Official Foursquare app substitute for check-ing in, 2Step Check-ins! Create an FsIntents 2Step shortcut on your homescreen, and check-in with only 2 steps:
1 - Touch shortcut
2 - Touch Venue
You're done! Never open your foursquare app for check-ing in again!

*QR Check-ins
Visit http://goo.gl/5DuMe on your PC to create QR tags that you can then use to automatically check-in with FsIntents. Print out these tags and physically place them at your favorite venues so you and everyone else can check-in easier and faster! Use homescreen shortcut to scan the QR tags.

*Voice Check-ins
Configure your favorite venues in FsIntents with voice commands, and check-in using your voice. Use homescreen shortcut to issue voice commands to FsIntents.

Please remember that Developers can't respond to Market comments. If you have problems using FsIntents, just drop me an email.

LITE VERSION RESTRICTION: You can only check in twice a day with the Lite Version of FsIntents.

A special thanks to Tim Korhumel for all the new icons! Thanks Tim!

Add FsIntents to your circles in Google+ so you can keep up with all the latest updates: https://plus.google.com/104685916695754873503/posts

Also, you can follow FsIntents on Facebook:
https://www.facebook.com/FsIntents

Unlocks AutoCast: https://play.google.com/store/apps/details?id=com.joaomgcd.autocast

Join the beta here: http://joaoapps.com/beta

Automate your phone with QR codes!

AutoBarcode is a Tasker plugin that allows you to completely automate your phone with QR Codes. Simply scan a code (generate one here http://goo.gl/JBLg7 ) and react to it in Tasker any way you like!

***Buy FsIntents now and AutoBarcodeLite will be upgraded to the full version!2 for the price of 1!***

(WARNING: TASKER IS AN ANDROID APP THAT AUTOMATES TASKS ON YOUR PHONE. THIS FEATURE ONLY WORKS WITH TASKER INSTALLED)
Note: AutoBarcode uses a Barcode Scanner installed on your phone. If no compatible scanner is found, it will open Android Market so you can download "Barcode Scanner" ( https://market.android.com/details?id=com.google.zxing.client.android ) for free.

Very simple example: open Tasker and create a new profile with an AutoBarcode condition (State->plugin->AutoBarcode). To start out, check the Event checkbox and leave everything else blank. Then associate it with a task that simply flashes "Hello World!". After this run the AutoBarcode app and scan any QR Code with it. This should make  "Hello World!" flash on your screen!

With AutoBarcode you have advanced matching options and even a flexible command system (see how it works here: http://goo.gl/PRQas) that allows you to truly personalize your experience.

Here are some examples on how you can use AutoBarcode:

- AutoBarcode is the Quickest way to let Tasker know you're at a specific place if there's no wifi or you don't want or can't use wifi (work, car, specific bedroom in your home). For example, have a QR code ready on your car's dashboard. When you get there, just scan the code, and Tasker can start playing your favorite songs with the volume turned way up, while opening google maps to show you the way.

- Create QR codes that enable or disable specific settings on your phone: turn off sound, enable blutooth, enable wifi when you get to work, etc..

- Use with AutoShortcut ( https://market.android.com/details?id=com.joaomgcd.autoshortcut ) and Winamp ( https://market.android.com/details?id=com.nullsoft.winamp ) to have fast access to your favorite playlists: have specific playlists at work, in your living room, in your bedroom, in your kid's bedrooms, in your car, etc

- Suprise your friends with your talking phone: generate QR codes and follow the instructions here: http://goo.gl/JBLg7

- Create a Scavenger hunt for your kids by spreading out QR codes with hints and clues on how to find the next one, by playing songs, videos, opening popups or webpages in tasker (or anything else you want!)

- Propose marriage in a cool and geeky way

By combining the power of QR Codes and Tasker you can do this and much, much more.

Follow our Google+ page to always get the latest updates on AutoBarcode: https://plus.google.com/102846121180673741272

If anything goes wrong or if you have any suggestions, please remember that Developers can't respond to Market comments. If you have problems using AutoBarcode, just drop me an email.

Lite version limited to 3 character scans.