DPF Monitor -Fiat & Alfa Romeo

kapron-ap

In-app purchases

About this app

Control your diesel engine condition by monitoring DPF diesel particulate filter clog level and regenerations history. Easily check if the filter is currently in the regeneration process.

In modern diesel engines any car faults are impacting DPF filter condition. Faulty injectors, cylinder compression issues, blow-by circuit problems, engine seals worn and many others.

Controlling DPF state gives the best overview of the car condition and performance. It is great tool when you are buying used car, you can instantly check car engine state and confirm car mileage.

To use this application you need elm327 Bluetooth/WiFi diagnostic interface and connect it to the OBD connector in your car.
To read DPF data, the program must connect to the engine via the CAN bus, so please make sure that the interface supports the ISO 14230-4 KPW protocol (fast init, 10.4Kbaud). We recommend Vgate iCar, OBDLink and Konnwei Bluetooth/WiFi interfaces.

Readings available:

- Current dpf status and clog level
- Current dpf temperature
- Current engine temperature
- Current differential pressure - another way to see dpf filter clogging
- Regeneration progress

- Distance from last DPF regeneration
- Average distance for last 5 regenerations stored in car engine control unit - ecu
- Average duration of last 5 regenerations stored in ecu
- Average temperature of last 5 regenerations stored in ecu
- Regenerations interrupted by key OFF (on some cars)

- Mileage at last oil change
- Distance from last oil change
- Engine oil degradation level

The application supports the following cars:

Alfa Romeo
- 159/Brera/Spider 1.9 2.4 2.0
- Giulietta 1.6 2.0
- Giulia 2.2
- Stelvio 2.2
- MiTo 1.3 1.6

Fiat
- 500 1.3 1.6
- 500L, 500X 1.3 1.6 2.0
- Panda 1.3 1.9
- Bravo 1.6 1.9 2.0
- Croma 1.9 2.4
- Doblo 1.3 1.6 1.9 2.0
- Ducato 2.0, 2.2, 2.3, 3.0
- Idea 1.6
- Linea 1.3 1.6
- Sedici 1.9 2.0
- Stilo 1.9
- Ducato 2.3
- Egea 1.6
- Fiorino 1.3
- Punto 1.3 1.9
- Punto Evo 1.3, 1.6
- Grande Punto 1.3 1.6 1.9
- Idea 1.3 1.6 1.9
- Qubo 1.3
- Strada 1.3
- Tipo 1.3 1.6, 2.0
- Toro 2.0
- Freemont 2.0

Lancia
- Delta 1.6 1.9 2.0
- Musa 1.3 1.6 1.9
- Thesis 2.4
- Delta 2014 1.6 2.0,
- Ypsilon 1.3,

Chrysler
- Delta 1.6 2.0
- Ypsilon 1.3,

Dodge
- Journey 2.0
- Dodge Neon 1.3 1.6,

Jeep
- Cherokee 2.0
- Compass 1.6, 2.0
- Renegade 1.6, 2.0

Suzuki SX4 1.9 2.0 DDiS

We did our best to ensure that this application is safe and not interfere with your car electronics, but still you are using it at your own risk. We recommend not to use it while driving. Authors are not responsible for any injuries made to you or any damage made to your car.

Ratings and reviews

It shows al the data you need, but it lacs graph and save option. It only shows live data.

not showing any values - using Vgate OBD2 adapter as recommended. Love to have my money back. useless application! do not recommend it!

This is a good application for monitor DPF condition. I am the owner of the Alfa Romeo 159 and I'm using ELM327 adapter. With this application I monitor clog level percent increase rate on city driving and compare it on highway driving. Also I can notice when auto regeneration proces started and when it's finished. The downside of this app is that it doesn't have an option to manually set the regeneration. I hope that in the next version this option will be included, which will raise this app.