Click on any node on the map to get connection details. The details include the node’s frequency and tone, and whether the node is idle or not. Free + No Ads.
DroidPSK is able to decode a BPSK31 or BPSK63 signal though the build in microphone. Just hold your Android phone or tablet close to the speaker of you Amateur Radio transceiver, adjust the waterfall slider to the PSK carrier frequencies and DroidPSK will start decoding.
In transmitting mode characters can be entered trough the keyboard. 20 Macros are also available to store standard texts like "name and qth" and "station info"
Starting V2.0 DroidPSK now also includes a logbook. Callsign, Name RST etc can be easily transferred into the lookbook from the receiving screen. The logbook also includes ADIF export and import to transfer your logbook data to a PC based logging software.
If you like to see more information you can take a look at the manual at: http://www.wolphi.com/ham-radio-apps/droidpsk/manual/
The suggested frequencies for PSK on the Amateur Radio bands are:
- 160m 1838.15 MHz
- 80m 3580.15 MHz
- 40m 7035.15 MHz for region 1 and region 3, and 7080.15 MHz for region 2 *
- 30m 10142.15 MHz
- 20m 14070.15 MHz
- 17m 18100.15 MHz
- 15m 21080.15 MHz (although most activity can be found 10 KHz lower)
- 12m 24920.15 MHz
- 10m 28120.15 MHz
If you experience any problems or have any suggestions please let me know at firstname.lastname@example.org. I would like to hear your feedback.
Morse Decoder can be used by Ham Radio (Amateur Radio) operators or anyone else interested in decoding Morse code from a Radio or any other device.
Morse Decoder includes a "waterfall" to show a frequency spectrum of about 50Hz to 2300Hz. A narrow band DSP filter can be set for the frequency of the Morse code tones by tapping the waterfall. The DSP filter is followed by an automatic gain control (AGC) to compensate for changing signal strengths.
The detected signal will be shown as a graph and several algorithms will then detect the speed of the Morse code and convert them into readable text. Speeds of less than 4 Wpm (Words per Minute) to more than 50 Wpm can be decoded.
For any question please visit our new forum at http://www.wolphi.com/forum/
This is the first version of Morse Decoder.
It has been tested on several Android devices and it performed very well or even better than PC based decoding software. However, since we are not able to test the performance on all 150+ Android devices there is the possibility that Morse Decoder will not work on all devices. If Morse Decoder doesn’t work on your device you can uninstall Morse Decoder within 15 Minutes for a full refund (This is the time frame given by Google and I am not able to change it). If the 15 minutes passed and you are not happy with Morse Decoder email me as soon as possible at email@example.com. Please include your name and the model of your phone in the email. I will then refund you the money as fast as possible. It is important that you include the model of your device. I will try to find the cause for the malfunction or include your phone model in a list of “not working” devices.
One for the Road... Now the best directory of frequencies for the 21,800+ Amateur Radio repeaters around the country is available to you…anytime…anywhere.
Containing the entire ARRL Repeater Directory and powered by TravelPlus you can now...
➢ Search for repeater data offline by city/state or coordinates. No Internet connection required! It’s ready and there when you need it!
➢ Find nearby repeaters based on your current location (location services must be enabled) and view detailed information.
➢ Locate repeaters on terrain-view maps (Google Play Services and Internet connection required for Google Maps).
➢ Filter repeater selections by frequency bands: 28, 50, 144, 222, 440, 900 and 1240 MHz plus ATV, D-STAR, APCO-25, EchoLink, IRLP, WiRES-II
➢ Filter repeater selections by their attributes: Open repeaters only, repeaters with weather information, linked repeaters and ARES/RACES repeaters.
Simple, fast and easy to use… All just a touch away!
Copyright © 2013 by DHF Systems, LLC and The American Radio Relay League, Inc. All rights reserved.
Repeater Directory® is a registered trademark of The American Radio Relay League, Inc.
TravelPlus for Repeaters™ and TravelPlus™ are trademarks of DHF Systems, LLC.
All other trademarks are property of their respective holders.
To protect equipment owners, repeater locations and geocoded location data are approximations only. Directional information and location points displayed on maps DO NOT indicate actual repeater locations. This product is NOT designed for, nor is it intended to be used for locating or navigating to actual repeater sites.
The repeater listings that appear in the ARRL Repeater Directory® are based on information provided annually by volunteer repeater coordinators throughout the United States and Canada. If information about a repeater is not submitted to the ARRL, it is not published. If a repeater appears to have been omitted from an ARRL product, or if the information that does appear is incorrect, please contact the responsible repeater coordinator first. The complete list of coordinators is available at http://www.arrl.org/nfcc-coordinators.
The CTCSS information for many of the repeater listings in North and South Carolina, Georgia, Tennessee, Kentucky, West Virginia, Mississippi and parts of Virginia is missing. This error was caused by an omission in the data provided to ARRL by the coordinating body.
Data and repeater information has been obtained from a number of sources believed to be reliable. However, because of the possibility of human or mechanical errors either from these sources or inherent in the compiling of a database and program of this size, neither DHF Systems, LLC and The American Radio Relay League, Inc. are responsible for or assume liability for the accuracy, adequacy, completeness, errors or omissions in any maps, map data, repeater data, or any other data, information or imagery incorporated in this product, or the results obtained from the use of such information.
THIS SOFTWARE IS PROVIDED BY DHF SYSTEMS, LLC AND THE AMERICAN RADIO RELAY LEAGUE, INC. "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DHF SYSTEMS, LLC AND THE AMERICAN RADIO RELAY LEAGUE, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
RFinder (Repeater Finder), the premier Ham Radio repeater locating tool for Amateur Radio operators, allows you to find repeaters all over the world based on your current location or a specified location. It allows sorting by distance or by Trustee callsign as well as filtering by band and radius in miles or kilometers.
*** NOW WITH CALLSIGN LOOKUP! D-STAR INFO IS HERE! ***
*** DStar, AllStar, NXDN, IRLP (with realtime node status), EchoLink,
*** YOU ASKED FOR IT, WE HAVE ADDED MAPPING! ***
Repeater Finder (RFinder) taps into The World Wide Repeater Directory, including IRLP and Echolink information. Our repeater locator database is growing daily.
Access to the Directory is included for one year then it will be an annual subscription for $9.99, and your subscription works for all platforms...Android, iPhone/iPad/iPod, www.RTSYSTEMSINC.com and chirp.dansplanet.org radio programmers, as well as web.rfinder.net. Each purchase of a new platform advances your annual to a year from that new purchase date. Windows Phone is coming!
If we do not have your repeaters listed...please do not refund or give us a bad rating...add repeaters at http://add.rfinder.net or request an add or update from the app.. Don't forget LAT/LON (in decimal), use periods as decimals, please.
The application accesses our Worldwide Repeater Directory and scanner directory but only stores information for repeaters within approximately 80 miles (125 km) from your location on your handheld at any one time, saving you room on your device and allowing distance calculation and mapping features to operate smoothly. It uses geolocation either via cell tower triangulation, GPS or manual location entry (so you can look up the repeaters you will use on vacation or business trips, etc.).
If anyone has lists of repeaters from their countries we would love to incorporate that into our database. We now have:
Aland Is., Algeria , Andorra , Antarctica , Antigua & Barbuda , Argentina , Aruba , Auckland & Campbell , Australia , Austria , Azores , Bahrain , Balearic Is. , Barbados , Belarus , Belgium , Bermuda , Brazil , British isles , Bulgaria , Canada , Canary Islands , Cayman Is. , Ceuta & Melilla , Chatham Is. , Chile , China , Colombia , Cooke , Corsica , Costa Rica , Côte d'Ivoire , Crete , Croatia , Cuba , Cyprus , Czech Republic , Denmark , Dodecanese , Dominica , Dominican Republic , Ecuador , El Salvador , England , Estonia , Faroe Is. , Finland , France , Germany , Gibraltar , Greece , Guantanamo Bay , Guatemala , Haiti , Hawaii , Honduras , Hong Kong , Hungary , Iceland , India , Indonesia , Iraq , Ireland , Isle of Man , Israel , Italy , Jamaica , Japan , Jersey , Jordan , Kazakhstan , Kermadec Is. , Republic of Korea , Kuwait , Latvia , Lebanon , Lewis , Lithuania , Luxembourg , Malta , Maricopa , Maricopia , Mexico , Minami Torishima , Moldova , Montserrat , Morocco , Netherlands , Netherlands Antilles , New Zealand , Northern Ireland , Norway , Oman , Pakistan , Panama , Papua New Guinea , Paraguay , Peru , Philippines , Poland , Polk , Portugal , Puerto Rico , Romania , Russia , Saint Kitts & Nevis , Saint Maarten , San Marino , Scotland , Senegal , Serbia & Montenegro , Singapore , Slovak Republic , Slovenia , South Africa , South Korea , Spain , Sri Lanka , St. Lucia , St. Vincent , Sweden , Switzerland , Taiwan , Thailand , Trinidad and Tobago , Turkey , Ukraine , United States , Uruguay , Venezuela , Wales , West Malaysia
Worldwide IRLP and Echolink nodes.
We support Android 1.6 and above!
Planned Future Developments
Contact us if you need apps created that are back-ended by IBM Lotus Domino, or any other database! Yes, Tablets!
© ITWeRKS 2011
If you are a ham radio (amateur radio) operator or just want to learn morse code.
With a lot of settings it is very comfortable to adjust Morse Trainer to your current level.
The following settings are available:
- Frequency (200 - 2200Hz)
- Waveform (sine / triangle)
- Fading (to reduce click at the end of a dot or dash)
- Speed (2Wpm - 52Wpm)
- Farnsworth speed
- Spacing (spacing between dots or dashes)
- Dot-Dash Ratio (length ratio of dashes compared to dots)
- Letter Spacing (Space between letters)
- Word Spacing (Space between words)
Five different learning modes are available in Morse Trainer
- Random groups of X mode: Morse Trainer will play groups of X randomly selected letter, numbers or special characters. X can be an amount between 1-9. Those characters can be individually selected. If you want to learn just "s","i" and "e" just select the 3 letters and Morse Trainer will create groups of X with those 3 letters.
The characters can also be chosen from 20 lessons of the Koch method.
- Real ham radio callsign mode: Morse Trainer will randomly play real amateur radio callsign from a database of 5000 callsigns which appeared in Contests over the last couple of years.
- QSO text mode: Morse Trainer will play randomly play QSO text. The database consists of 300 different qso texts.
- Most common English words mode: Morse Trainer will play randomly the 500 most used English words.
- Own text mode: Enter your own text and Morse Trainer will play it over and over again.
- Ebook mode: Text files can be loaded from SD card
Morse Trainer is priced less than the cost of a fancy coffee and it is a great app to learn and improve you CW speed away from your amateur radio station or your PC.
with Ham Radio Tools you can:
-look up callsign information!
-find current GPS location information
-save each contact to a log database stored on the phone
-review and edit each log entry
-search for keywords in different fields of the log entry
-calculate a simple quarter and half wave antenna length
-calculate the wavelength of a frequency
*** Now includes band limits for All Amateur Licenses ***
*** Calculators for Yagi, Dipole, J-pole, and Vertical antennas ***
*** Callsign Lookup is now included!!! ***
Callsign database is pulled from FCC website and updated daily! Callsign lookup works for U.S. callsigns ONLY.
Results include address, current and previous license updates, date of any updates, type and class of license, and even includes a link to the FCC database for even more details. Address can be mapped on Google Maps by tapping on the address.
The contact log allows you to store information about a completed contact including date, time started, time ended, frequency, mode, station, location, signal reports, and an area for general comments about the contact. A must for field day and general book keeping. Data and start time are filled in when starting the log to save time. End time can even be filled in automatically upon saving the log entry.
The contact log also comes with a handy search feature for quickly locating that one of a kind long distance contact you like to brag about. The search is focused on fields chosen by the user. If you want to search for a specific call sign select station as the search location and enter the call sign in the search box. Search keywords are CASE SENSITIVE meaning capital or lowercase letter DO matter.
A summary of the band limits for each class are included. Always refer to the official ARRL Band Plan when in doubt.
Some simple formulas and calculators are included for quick reference in the field and includes: Yagi, Dipole, J-Pole, Vertical antennas, and wavelength calculator.
Works with either phones, or tablets. Tablet version makes it easier to manipulate data, and do logging, even having the ability to see current data while logging on screen (See screen shots). ADIF files can be exported, including all information collected (Upgrade required). The feature list is improving constantly, now the ability to edit and delete log entries is included, along with a database of all LOTW listed call signs. See a map of where you've made QSOs that are logged. More coming soon!
Currently, this tool is US centric, but there are plans to change that in the future. Specifically, operating outside of the US requires an internet connection. If there's a particular location you'd like to see, or would just like to help improve this app, please take the survey at https://docs.google.com/forms/d/1AfrKLXJwt9l1e-1Rew7G5WLyorcd_kLWyRmt82rw994/viewform
Reasons for each permission required:
ACCESS_FINE_LOCATION- This app uses GPS to determine where you are, and requires this permission to get that information
INTERNET- Used to query web APIs about your exact location.
ACCESS_WIFI_STATE- Used to make sure we don't try to contact someone if you don't have a network connection
WRITE_EXTERNAL_STORAGE- Used for Google Maps to determine your location if you don't have one
VIBRATE- Used to notify user of some errors
READ_PHONE_STATE- This is used to ensure that each user has a unique token, only used for those who purchase in app products.
BILLING- Used to purchase in app products, such as US Counties Map.
The features in the receiving modes include:
- Spectrum analyzer for easy tuning
- Auto synchronization ( auto slant correction)
- Auto mode detect
- VIS encoding (detects SSTV header and sets mode automatically)
- Level bar for adjusting the audio signal
- Auto save received pictures to SD Card.
- Share received pictures (Email , Dropbox etc.)
The features in the transmitting modes include:
- Pre-load up to 9 pictures from the SD Card into DroidSSTV’s gallery
- Adjust contrast, brightness and saturation
- Template editor for easily overlaying templates over images
- Macro’s for use with templates
A waterfall shows the frequency spectrum of 100Hz to 2500Hz. Just slide the waterfall slide on a RTTY carrier frequency and DroidRTTY will decode the signal.
In transmitting mode characters can be entered trough the keyboard. 9 Macros are also available to store standard texts like “name and qth” and “station info”
DroidRTTY also now includes a logbook. Callsign, Name RST etc can be easily tranfered into the lookbook from the receiving screen.
The logbook also includes ADIF export and import to transfer your logbook data to a PC based logging software.
Version 1.10 also includes 50 baud / 450Hz shift to receive the German Weather Service (Deutscher Wetterdienst)
DX Cluster's focus is on alarms and real time spots. The app runs in the background as a service and alarms you with a ringtone of your choice when a callsign or prefix appears in the DX Cluster.
The key features of DX Cluster are:
- Real time spots: Connect to one of the 60 AR-Clusters in the database and get real time spots.
- Filtering: A country filter can be set to filter out countries of the spotter or spot. If you just want to receive spots originated from North America enter K,VE and choose spotter. If you just want to see spots from Germany, Netherland and England, choose DX and enter DL,PA,G.
- Alarms: DX Cluster will alarm you by a ringtone of your choice if a callsign or a prefix appears in the DX Cluster. For example enter ZL8 in the alarm field and as soon as a spot with the prefix ZL8 appears on the cluster the DX Cluster will alarm you. Multiple callsign or prefix entries are possible.
This app is intended to use by ham radio (amateur radio) operators only. You need a ham radio callsign to log into the DX cluster!
For any question please visit our new forum at http://www.wolphi.com/forum/
The app is very simple to set up just needing an amateur radio callsign and the APRS passcode for that callsign (available on request from Cross Country Wireless).
Menu options include GPS position information including WGS84 locations for worldwide use and.OSGB locations for UK users. Another menu option also opens an OpenStreetMap based on the GPS fix.
The app can be used on any Android phone or tablet with GPS (and Bluetooth for use with a DigiTracker). If your Android tablet does not have GPS then the app will not work.
Note...the GPS on some Samsung phones doesn't work with this app. As a result the app is now provided free of charge for amateur radio experimentation.
More information at:
This App was developed to give over 8,700 OMISS Members mobile access to key information such as the Daily Net Schedule and our Member Directory.
* Member Lookup (search)
* NCS Schedule
* Active Nets
* News & Information
* New Members List
* Officers List
* OMISS WebSite (quick access)
Permissions used: Network communication - full Internet access
Reason: access to user requested data, no tracking or advertising is used in this app.
No private/identifying data is transmitted.